| .. |
|
ar724x.dtsi
|
ath79: add LAN LEDs control bits for AR724x GPIO function pinmux
|
4 years ago |
|
ar934x.dtsi
|
ath79: ar934x: use reset for usb-phy-analog
|
4 years ago |
|
ar1022_iodata_wn-ag300dgr.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
6 years ago |
|
ar7100.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
ar7161_aruba_ap-105.dts
|
ath79: add support for Aruba AP-105
|
5 years ago |
|
ar7161_buffalo_wzr-hp-ag300h.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
ar7161_dlink_dir-825-b1.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
ar7161_jjplus_ja76pf2.dts
|
ath79: dts: fix ja76pf2 spi frequency
|
5 years ago |
|
ar7161_netgear_wndr3700.dts
|
ath79: wndr3700 series: fix wifi range & throughput
|
4 years ago |
|
ar7161_netgear_wndr3700.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
ar7161_netgear_wndr3700v2.dts
|
ath79: WNDR3700 v1/v2: make u-boot env partition writable
|
4 years ago |
|
ar7161_netgear_wndr3800.dts
|
ath79: specify "firmware" partition format for Netgear WNDR3800
|
6 years ago |
|
ar7161_ubnt_routerstation-pro.dts
|
ath79: add syscon compatible property to ar7100 ethernet nodes
|
6 years ago |
|
ar7161_ubnt_routerstation.dts
|
ath79: initial support for Ubiquiti RouterStation and RouterStation Pro
|
6 years ago |
|
ar7161_ubnt_routerstation.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
ar7240.dtsi
|
ath79: ar724x: make sure builtin-switch is enabled in DT
|
4 years ago |
|
ar7240_buffalo_whr-g301n.dts
|
ath79: ar724x: make sure builtin-switch is enabled in DT
|
4 years ago |
|
ar7240_netgear_wnr612-v2.dts
|
ath79: WNR612v2: improve device support
|
4 years ago |
|
ar7240_netgear_wnr612-v2.dtsi
|
ath79: ar724x: make sure builtin-switch is enabled in DT
|
4 years ago |
|
ar7240_on_n150r.dts
|
ath79: WNR612v2: improve device support
|
4 years ago |
|
ar7240_tplink.dtsi
|
ath79: reorganize DTSI for ar7240 TP-Link devices
|
4 years ago |
|
ar7240_tplink_tl-wa.dtsi
|
ath79: fix syntax error in ar7240_tplink_tl-wa.dtsi
|
4 years ago |
|
ar7240_tplink_tl-wa701nd-v1.dts
|
ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1
|
4 years ago |
|
ar7240_tplink_tl-wa730re-v1.dts
|
ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1
|
4 years ago |
|
ar7240_tplink_tl-wa801nd-v1.dts
|
ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1
|
4 years ago |
|
ar7240_tplink_tl-wa830re-v1.dts
|
ath79: add support for TP-Link TL-WA830RE v1
|
4 years ago |
|
ar7240_tplink_tl-wa901nd-v1.dts
|
ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1
|
4 years ago |
|
ar7240_tplink_tl-wr.dtsi
|
ath79: ar724x: make sure builtin-switch is enabled in DT
|
4 years ago |
|
ar7240_tplink_tl-wr740n-v1.dts
|
ath79: reorganize DTSI for ar7240 TP-Link devices
|
4 years ago |
|
ar7240_tplink_tl-wr740n-v3.dts
|
ath79: reorganize DTSI for ar7240 TP-Link devices
|
4 years ago |
|
ar7240_tplink_tl-wr741-v1.dts
|
ath79: reorganize DTSI for ar7240 TP-Link devices
|
4 years ago |
|
ar7240_tplink_tl-wr743nd-v1.dts
|
ath79: reorganize DTSI for ar7240 TP-Link devices
|
4 years ago |
|
ar7240_tplink_tl-wr841-v5.dts
|
ath79: reorganize DTSI for ar7240 TP-Link devices
|
4 years ago |
|
ar7240_tplink_tl-wr941-v4.dts
|
ath79: reorganize DTSI for ar7240 TP-Link devices
|
4 years ago |
|
ar7241.dtsi
|
ath79: ar724x: make sure builtin-switch is enabled in DT
|
4 years ago |
|
ar7241_tplink.dtsi
|
ath79: ar724x: make sure builtin-switch is enabled in DT
|
4 years ago |
|
ar7241_tplink_tl-mr3x20.dtsi
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
6 years ago |
|
ar7241_tplink_tl-mr3220-v1.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
6 years ago |
|
ar7241_tplink_tl-mr3420-v1.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
6 years ago |
|
ar7241_tplink_tl-wr841-v7.dts
|
ath79: rename TP-LINK to TP-Link
|
5 years ago |
|
ar7241_tplink_tl-wr842n-v1.dts
|
ath79: ar724x: make sure builtin-switch is enabled in DT
|
4 years ago |
|
ar7241_ubnt_airrouter.dts
|
ath79: Add missing read-only properties
|
5 years ago |
|
ar7241_ubnt_bullet-m.dts
|
ath79: add SoC or family compatible
|
6 years ago |
|
ar7241_ubnt_nanostation-loco-m.dts
|
ath79: add support for Ubiquiti Nanostation Loco M (XM)
|
4 years ago |
|
ar7241_ubnt_nanostation-m.dts
|
ath79: align naming of Ubiquiti Nanostation M
|
5 years ago |
|
ar7241_ubnt_picostation-m.dts
|
ath79: add support for Ubiquiti Picostation M (XM)
|
4 years ago |
|
ar7241_ubnt_rocket-m.dts
|
ath79: add SoC or family compatible
|
6 years ago |
|
ar7241_ubnt_unifi.dts
|
ath79: ar724x: make sure builtin-switch is enabled in DT
|
4 years ago |
|
ar7241_ubnt_xm.dtsi
|
ath79: Define firmware partition format to all boards where applicable
|
6 years ago |
|
ar7241_ubnt_xm_outdoor.dtsi
|
ath79: split ubnt outdoor device leds into separate dtsi
|
6 years ago |
|
ar7242.dtsi
|
ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi
|
5 years ago |
|
ar7242_avm_fritz300e.dts
|
ath79: dts: Unify naming of gpio-keys nodes
|
5 years ago |
|
ar7242_buffalo_bhr-4grv.dts
|
ath79: Consistently label art partition with lower case
|
5 years ago |
|
ar7242_buffalo_wzr-bhr.dtsi
|
ath79: Consistently label art partition with lower case
|
5 years ago |
|
ar7242_buffalo_wzr-hp-g302h-a1a0.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
6 years ago |
|
ar7242_buffalo_wzr-hp-g450h.dts
|
ath79: Consistently label art partition with lower case
|
5 years ago |
|
ar7242_tplink_tl-wr2543-v1.dts
|
ath79: rename TP-LINK to TP-Link
|
5 years ago |
|
ar9132.dtsi
|
ath79: ag71xx: apply interface mode to MII0/1_CTRL on ar71xx/ar913x
|
6 years ago |
|
ar9132_tplink_tl-wa901nd-v2.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
6 years ago |
|
ar9132_tplink_tl-wr941-v2.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
6 years ago |
|
ar9132_tplink_tl-wr1043nd-v1.dts
|
ath79: make TP-Link revision naming consistent
|
5 years ago |
|
ar9330.dtsi
|
ath79: enable gpio on ar933x by default
|
4 years ago |
|
ar9330_glinet_gl-ar150.dts
|
ath79: enable gpio on ar933x by default
|
4 years ago |
|
ar9330_pqi_air-pen.dts
|
ath79: enable gpio on ar933x by default
|
4 years ago |
|
ar9331.dtsi
|
ath79: add tl-mr3020-v1 support
|
6 years ago |
|
ar9331_8dev_carambola2.dts
|
ath79: enable gpio on ar933x by default
|
4 years ago |
|
ar9331_embeddedwireless_dorin.dts
|
ath79: enable gpio on ar933x by default
|
4 years ago |
|
ar9331_etactica_eg200.dts
|
ath79: enable gpio on ar933x by default
|
4 years ago |
|
ar9331_pisen_wmm003n.dts
|
ath79: enable gpio on ar933x by default
|
4 years ago |
|
ar9331_tplink_tl-mr10u.dts
|
ath79: rename dts/image using manufacturer_board scheme
|
6 years ago |
|
ar9331_tplink_tl-mr3020-v1.dts
|
ath79: enable gpio on ar933x by default
|
4 years ago |
|
ar9331_tplink_tl-mr3040-v2.dts
|
ath79: enable gpio on ar933x by default
|
4 years ago |
|
ar9331_tplink_tl-wr703n.dts
|
ath79: rename dts/image using manufacturer_board scheme
|
6 years ago |
|
ar9331_tplink_tl-wr703n_tl-mr10u.dtsi
|
ath79: enable gpio on ar933x by default
|
4 years ago |
|
ar9331_tplink_tl-wr710n-8m.dtsi
|
ath79: add support for TP-Link TL-WR710N v2.1
|
4 years ago |
|
ar9331_tplink_tl-wr710n-v1.dts
|
ath79: add support for TP-Link TL-WR710N v2.1
|
4 years ago |
|
ar9331_tplink_tl-wr710n-v2.1.dts
|
ath79: add support for TP-Link TL-WR710N v2.1
|
4 years ago |
|
ar9331_tplink_tl-wr710n.dtsi
|
ath79: add support for TP-Link TL-WR710N v2.1
|
4 years ago |
|
ar9331_tplink_tl-wr740n-v4.dts
|
ath79: rename TL-WR740ND-v4 to TL-WR740N-v4
|
5 years ago |
|
ar9331_tplink_tl-wr740n-v5.dts
|
ath79: add support for TP-Link TL-WR740N v5
|
4 years ago |
|
ar9331_tplink_tl-wr741nd-v4.dts
|
ath79: add SoC or family compatible
|
6 years ago |
|
ar9331_tplink_tl-wr741nd-v4.dtsi
|
ath79: enable gpio on ar933x by default
|
4 years ago |
|
ar9341.dtsi
|
ath79: ar934x: Update dts for current ag71xx driver
|
6 years ago |
|
ar9341_pcs_cr3000.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
6 years ago |
|
ar9341_tplink_tl-mr3420-v2.dts
|
ath79: migrate TP-Link TL-MR3420v2 to ath79
|
4 years ago |
|
ar9341_tplink_tl-wa.dtsi
|
ath79: add support for TP-Link TL-WA850RE v1
|
4 years ago |
|
ar9341_tplink_tl-wa850re-v1.dts
|
ath79: add support for TP-Link TL-WA850RE v1
|
4 years ago |
|
ar9341_tplink_tl-wa860re-v1.dts
|
ath79: add support for TP-Link TL-WA860RE v1
|
4 years ago |
|
ar9341_tplink_tl-wr841-v8.dts
|
ath79: correctly define WiFi switch for TL-WR841ND v8
|
4 years ago |
|
ar9341_tplink_tl-wr842n-v2.dts
|
ath79: add gpio4 pinmux on TL-WR841N/ND v8, WR842N v2, MR3420 v2
|
4 years ago |
|
ar9342_iodata_etg3-r.dts
|
ath79: Consistently label art partition with lower case
|
5 years ago |
|
ar9342_ubnt_bullet-m-xw.dts
|
ath79: ubnt-bullet-m-xw: Remove eth1 disabled node
|
5 years ago |
|
ar9342_ubnt_lap-120.dts
|
ath79: add SoC or family compatible
|
6 years ago |
|
ar9342_ubnt_nanobeam-ac.dts
|
ath79: indicate boot/failsafe/upgrade for NanoBeam/Nanostation AC
|
4 years ago |
|
ar9342_ubnt_nanostation-ac-loco.dts
|
ath79: add SoC or family compatible
|
6 years ago |
|
ar9342_ubnt_nanostation-ac.dts
|
ath79: indicate boot/failsafe/upgrade for NanoBeam/Nanostation AC
|
4 years ago |
|
ar9342_ubnt_nanostation-loco-m-xw.dts
|
ath79: add missing reset-gpios for NanoStation Loco M (XW)
|
4 years ago |
|
ar9342_ubnt_nanostation-m-xw.dts
|
ath79: Add support for Ubiquiti Nanostation M (XW)
|
5 years ago |
|
ar9342_ubnt_wa.dtsi
|
ath79: add SoC or family compatible
|
6 years ago |
|
ar9342_ubnt_xw.dtsi
|
ath79: fix DTS node names for Ubiquiti XW partitions
|
4 years ago |
|
ar9344.dtsi
|
ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus
|
4 years ago |
|
ar9344_comfast_cf-e120a-v3.dts
|
ath79: add support for COMFAST CF-E120A v3
|
5 years ago |
|
ar9344_dlink_dir-8x5.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
ar9344_dlink_dir-825-c1.dts
|
ath79: add d-link dir-825-c1 and dir-835-a1
|
6 years ago |
|
ar9344_dlink_dir-835-a1.dts
|
ath79: add d-link dir-825-c1 and dir-835-a1
|
6 years ago |
|
ar9344_ocedo_raccoon.dts
|
ath79: fix OCEDO Raccoon 10Mbit PLL value
|
5 years ago |
|
ar9344_pcs_cap324.dts
|
ath79: fix LED labels for PowerCloud CAP324
|
4 years ago |
|
ar9344_pcs_cr5000.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
6 years ago |
|
ar9344_tplink_tl-wdr3500-v1.dts
|
ath79: add support for TP-Link WDR3500 v1
|
4 years ago |
|
ar9344_tplink_tl-wdr3600-v1.dts
|
ath79: Use -v1 suffix for TP-Link WDR3600/4300
|
5 years ago |
|
ar9344_tplink_tl-wdr4300-v1-il.dts
|
ath79: add support for TP-Link TL-WDR4300 v1 (IL)
|
5 years ago |
|
ar9344_tplink_tl-wdr4300-v1.dts
|
ath79: Use -v1 suffix for TP-Link WDR3600/4300
|
5 years ago |
|
ar9344_tplink_tl-wdr4300.dtsi
|
ath79: add support for TP-Link WDR3500 v1
|
4 years ago |
|
ar9344_tplink_tl-wdr4310-v1.dts
|
ath79: add support for TP-Link TL-WDR4310 v1
|
4 years ago |
|
ar9344_tplink_tl-wdrxxxx.dtsi
|
ath79: add support for TP-Link WDR3500 v1
|
4 years ago |
|
ar9344_wd_mynet-n750.dts
|
ath79: add support for WD My Net N750
|
5 years ago |
|
ar9344_wd_mynet-wifi-rangeextender.dts
|
ath79: convert WD MyNet Range Extender to gpio-keys
|
5 years ago |
|
ar9344_winchannel_wb2000.dts
|
treewide: dts: Remove default-state=off property from all gpio LED nodes
|
6 years ago |
|
ar9344_zbtlink_zbt-wd323.dts
|
ath79: Add support for ZBT-WD323
|
5 years ago |
|
ath79.dtsi
|
ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi
|
5 years ago |
|
qca953x.dtsi
|
ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus
|
4 years ago |
|
qca953x_tplink_tl-wr810n.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca956x.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9531_comfast_cf-e5.dts
|
ath79: add support for COMFAST CF-E5/E7
|
5 years ago |
|
qca9531_engenius_ews511ap.dts
|
ath79: Add missing read-only properties
|
5 years ago |
|
qca9531_glinet_gl-ar300m-lite.dts
|
ath79: Clean up GL-AR300M DTS/DTSI inclusions
|
5 years ago |
|
qca9531_glinet_gl-ar300m-nand.dts
|
ath79: Add GL.iNet AR-300M-Lite
|
5 years ago |
|
qca9531_glinet_gl-ar300m-nor.dts
|
ath79: Clean up GL-AR300M DTS/DTSI inclusions
|
5 years ago |
|
qca9531_glinet_gl-ar300m.dtsi
|
ath79: Add missing read-only properties
|
5 years ago |
|
qca9531_glinet_gl-x750.dts
|
ath79: Add missing read-only properties
|
5 years ago |
|
qca9531_tplink_archer-d50-v1.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9531_tplink_tl-wr810n-v1.dts
|
ath79: Add support for TP-Link WR810N
|
5 years ago |
|
qca9531_yuncore_a770.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9533_comfast_cf-e110n-v2.dts
|
ath79: add support for COMFAST CF-E110N
|
5 years ago |
|
qca9533_tplink_cpe210-v2.dts
|
ath79: Add support for TP-Link CPE210 v2
|
5 years ago |
|
qca9533_tplink_cpe210-v3.dts
|
ath79: Add support for TP-Link CPE210 v3
|
5 years ago |
|
qca9533_tplink_cpe210.dtsi
|
ath79: add support for the TP-LINK CPE220 V3
|
4 years ago |
|
qca9533_tplink_cpe220-v3.dts
|
ath79: add support for the TP-LINK CPE220 V3
|
4 years ago |
|
qca9533_tplink_cpexxx.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9533_tplink_tl-wa801nd-v3.dts
|
ath79: add support for TP-Link TL-WA801ND v3/v4
|
4 years ago |
|
qca9533_tplink_tl-wa801nd-v4.dts
|
ath79: add support for TP-Link TL-WA801ND v3/v4
|
4 years ago |
|
qca9533_tplink_tl-wa801nd.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9533_tplink_tl-wr802n-v1.dts
|
ath79: add support for TP-Link TL-WR802N V1 and V2
|
4 years ago |
|
qca9533_tplink_tl-wr802n-v2.dts
|
ath79: add support for TP-Link TL-WR802N V1 and V2
|
4 years ago |
|
qca9533_tplink_tl-wr802n.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9533_tplink_tl-wr810n-v2.dts
|
ath79: Add support for TP-Link WR810N
|
5 years ago |
|
qca9533_tplink_tl-wr841-v9.dts
|
ath79: add support for TP-Link TL-WR841N/ND v10
|
4 years ago |
|
qca9533_tplink_tl-wr841-v10.dts
|
ath79: add support for TP-Link TL-WR841N/ND v10
|
4 years ago |
|
qca9533_tplink_tl-wr841-v11.dts
|
ath79: add support for TP-Link TL-WR841N/ND v12
|
4 years ago |
|
qca9533_tplink_tl-wr841-v11.dtsi
|
ath79: add support for TP-Link TL-WR841N/ND v12
|
4 years ago |
|
qca9533_tplink_tl-wr841-v12.dts
|
ath79: add support for TP-Link TL-WR841N/ND v12
|
4 years ago |
|
qca9533_tplink_tl-wr841.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9533_tplink_tl-wr842n-v3.dts
|
ath79: Consistently label art partition with lower case
|
5 years ago |
|
qca9533_ubnt_acb-isp.dts
|
ath79: add support for Ubiquiti airCube ISP
|
5 years ago |
|
qca9557.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9557_buffalo_bhr-4grv2.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9557_iodata_wn-ac-dgr.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9557_iodata_wn-ac1167dgr.dts
|
ath79: add support for I-O DATA WN-AC1600DGR
|
5 years ago |
|
qca9557_iodata_wn-ac1600dgr.dts
|
ath79: add support for I-O DATA WN-AC1600DGR
|
5 years ago |
|
qca9557_iodata_wn-ac1600dgr2.dts
|
ath79: add support for I-O DATA WN-AC1600DGR
|
5 years ago |
|
qca9558_devolo_dvl1xxx.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9558_devolo_dvl1200e.dts
|
ath79: add support for devolo WiFi pro 1200e
|
5 years ago |
|
qca9558_devolo_dvl1200i.dts
|
ath79: add support for devolo WiFi pro 1200i
|
5 years ago |
|
qca9558_devolo_dvl1750c.dts
|
ath79: add support for devolo WiFi pro 1750c
|
5 years ago |
|
qca9558_devolo_dvl1750e.dts
|
ath79: add support for Devolo WiFi Pro 1750e
|
5 years ago |
|
qca9558_devolo_dvl1750i.dts
|
ath79: add support for devolo WiFi pro 1750i
|
5 years ago |
|
qca9558_devolo_dvl1750x.dts
|
ath79: add support for devolo WiFi pro 1750x
|
5 years ago |
|
qca9558_engenius_ecb1750.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9558_engenius_epg5000.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9558_librerouter_librerouter-v1.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9558_netgear_ex6400.dts
|
ath79: add support for Netgear EX6400 and EX7300
|
5 years ago |
|
qca9558_netgear_ex7300.dts
|
ath79: add support for Netgear EX6400 and EX7300
|
5 years ago |
|
qca9558_netgear_ex7300.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9558_ocedo_koala.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9558_ocedo_ursus.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9558_openmesh_om5p-ac-v2.dts
|
ath79: Consistently label art partition with lower case
|
5 years ago |
|
qca9558_tplink_archer-c5-v1.dts
|
ath79: add support for TP-Link Archer C5 v1
|
5 years ago |
|
qca9558_tplink_archer-c7-v1.dts
|
ath79: make TP-Link revision naming consistent
|
5 years ago |
|
qca9558_tplink_archer-c7-v2.dts
|
ath79: make TP-Link revision naming consistent
|
5 years ago |
|
qca9558_tplink_archer-c7.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9558_tplink_re350k-v1.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9558_tplink_tl-wdr4900-v2.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9558_tplink_tl-wr941n-v7-cn.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9558_tplink_tl-wr1043nd-v2.dts
|
ath79: make TP-Link revision naming consistent
|
5 years ago |
|
qca9558_tplink_tl-wr1043nd-v3.dts
|
ath79: make TP-Link revision naming consistent
|
5 years ago |
|
qca9558_tplink_tl-wr1043nd.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9561_avm_fritz4020.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9561_tplink_archer-c5x.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9561_tplink_archer-c6x.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9561_tplink_archer-c25-v1.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9561_tplink_archer-c58-v1.dts
|
ath79: rename TP-LINK to TP-Link
|
5 years ago |
|
qca9561_tplink_archer-c59-v1.dts
|
ath79: rename TP-LINK to TP-Link
|
5 years ago |
|
qca9561_tplink_archer-c60-v1.dts
|
ath79: add support for TP-Link Archer C60 v3
|
4 years ago |
|
qca9561_tplink_archer-c60-v2.dts
|
ath79: add support for TP-Link Archer C60 v3
|
4 years ago |
|
qca9561_tplink_archer-c60-v3.dts
|
ath79: add support for TP-Link Archer C60 v3
|
4 years ago |
|
qca9561_xiaomi_mi-router-4q.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9563_dlink_dir-859-a1.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9563_elecom_wrc-300ghbk2-i.dts
|
ath79: Consistently label art partition with lower case
|
5 years ago |
|
qca9563_elecom_wrc-1750ghbk2-i.dts
|
ath79: Consistently label art partition with lower case
|
5 years ago |
|
qca9563_elecom_wrc-ghbk2-i.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9563_glinet_gl-ar750s.dts
|
ath79: enable GL-AR750S NOR variant from master
|
3 years ago |
|
qca9563_nec_wg800hp.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9563_nec_wg1200cr.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9563_phicomm_k2t.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9563_rosinson_wr818.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9563_tplink_archer-a7-v5.dts
|
ath79: Add missing read-only properties
|
5 years ago |
|
qca9563_tplink_archer-c2-v3.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9563_tplink_archer-c6-v2.dts
|
ath79: add support for TP-Link Archer C6 v2
|
5 years ago |
|
qca9563_tplink_archer-c7-v4.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9563_tplink_archer-c7-v5.dts
|
ath79: Add missing read-only properties
|
5 years ago |
|
qca9563_tplink_archer-x6-v2.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9563_tplink_archer-x7-v5.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9563_tplink_re450-v2.dts
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9563_tplink_tl-wr1043n-v5.dts
|
ath79: Consistently label art partition with lower case
|
5 years ago |
|
qca9563_tplink_tl-wr1043n.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
qca9563_tplink_tl-wr1043nd-v4.dts
|
ath79: Consistently label art partition with lower case
|
5 years ago |
|
qca9563_ubnt_unifiac-lite.dts
|
ath79: add support for UniFi AC-LR
|
5 years ago |
|
qca9563_ubnt_unifiac-lite.dtsi
|
ath79: add support for Unifi AC Mesh
|
6 years ago |
|
qca9563_ubnt_unifiac-lr.dts
|
ath79: add support for UniFi AC-LR
|
5 years ago |
|
qca9563_ubnt_unifiac-mesh-pro.dts
|
ath79: add support for UniFi AC-Mesh Pro
|
6 years ago |
|
qca9563_ubnt_unifiac-mesh.dts
|
ath79: add support for Unifi AC Mesh
|
6 years ago |
|
qca9563_ubnt_unifiac-pro.dts
|
ath79: add support for UniFi AC-Mesh Pro
|
6 years ago |
|
qca9563_ubnt_unifiac-pro.dtsi
|
ath79: add support for UniFi AC-Mesh Pro
|
6 years ago |
|
qca9563_ubnt_unifiac.dtsi
|
ath79: remove wmac mtd-mac-address for UniFi AC family
|
4 years ago |
|
qca9563_yuncore_a782.dts
|
ath79: add support for YunCore XD4200 and A782
|
5 years ago |
|
qca9563_yuncore_xd4200.dts
|
ath79: add support for YunCore XD4200 and A782
|
5 years ago |
|
qca9563_yuncore_xd4200.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
|
tp9343_tplink_tl-wa901nd-v4.dts
|
ath79: add support for TP-Link TL-WA901ND v4 and v5
|
4 years ago |
|
tp9343_tplink_tl-wa901nd-v5.dts
|
ath79: add support for TP-Link TL-WA901ND v4 and v5
|
4 years ago |
|
tp9343_tplink_tl-wa901nd.dtsi
|
ath79: add support for TP-Link TL-WA901ND v4 and v5
|
4 years ago |
|
tp9343_tplink_tl-wr94x.dtsi
|
ath79: add support for TP-Link TL-WA901ND v4 and v5
|
4 years ago |
|
tp9343_tplink_tl-wr940n-v3.dts
|
ath79: add support for TP9343-based TP-Link TL-WR94x devices
|
4 years ago |
|
tp9343_tplink_tl-wr940n-v3.dtsi
|
ath79: add support for TP9343-based TP-Link TL-WR94x devices
|
4 years ago |
|
tp9343_tplink_tl-wr940n-v4.dts
|
ath79: add support for TP9343-based TP-Link TL-WR94x devices
|
4 years ago |
|
tp9343_tplink_tl-wr940n-v6.dts
|
ath79: add support for TP-Link TL-WR940N v6
|
4 years ago |
|
tp9343_tplink_tl-wr941nd-v6.dts
|
ath79: add support for TP9343-based TP-Link TL-WR94x devices
|
4 years ago |
|
tp9343_tplink_tl-wx.dtsi
|
ath79: drop and consolidate redundant chosen/bootargs
|
4 years ago |
Jan Alexander