This ports support for the TL-WA860RE v1 range extender from ar71xx to ath79. Specifications: Board: AP123 / AR9341 rev. 3 Flash/RAM: 4/32 MiB CPU: 535 MHz WiFi: 2.4 GHz b/g/n Ethernet: 1 port (100M) Two external antennas Flashing instructions: Upload the factory image via the vendor firmware upgrade option. Recovery: Note that this device does not provide TFTP via ethernet like many other TP-Link devices do. You will have to open the case if you require recovery beyond failsafe. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Sebastian Knapp <sebastian4842@outlook.com> (cherry picked from commit 385f4868bc58b04e465db2fbcfce848a75009a74)master
parent
2e6bfab8c5
commit
bdbda30384
@ -0,0 +1,72 @@ |
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||
/dts-v1/; |
||||
|
||||
#include "ar9341_tplink_tl-wa.dtsi" |
||||
|
||||
/ { |
||||
model = "TP-Link TL-WA860RE v1"; |
||||
compatible = "tplink,tl-wa860re-v1", "qca,ar9341"; |
||||
|
||||
aliases { |
||||
led-boot = &led_power_green; |
||||
led-failsafe = &led_power_orange; |
||||
led-running = &led_power_green; |
||||
led-upgrade = &led_power_orange; |
||||
}; |
||||
|
||||
keys { |
||||
compatible = "gpio-keys"; |
||||
|
||||
reset { |
||||
label = "Reset"; |
||||
linux,code = <KEY_RESTART>; |
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>; |
||||
debounce-interval = <60>; |
||||
}; |
||||
|
||||
wps { |
||||
label = "WPS"; |
||||
linux,code = <KEY_WPS_BUTTON>; |
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>; |
||||
debounce-interval = <60>; |
||||
}; |
||||
|
||||
onoff { |
||||
label = "ONOFF"; |
||||
linux,code = <BTN_1>; |
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>; |
||||
debounce-interval = <60>; |
||||
}; |
||||
}; |
||||
|
||||
leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
lan { |
||||
label = "tp-link:green:lan"; |
||||
gpios = <&gpio 20 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
led_power_green: power_green { |
||||
label = "tp-link:green:power"; |
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>; |
||||
default-state = "on"; |
||||
}; |
||||
|
||||
led_power_orange: power_orange { |
||||
label = "tp-link:orange:power"; |
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
wlan_green { |
||||
label = "tp-link:green:wlan"; |
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>; |
||||
linux,default-trigger = "phy0tpt"; |
||||
}; |
||||
|
||||
wlan_orange { |
||||
label = "tp-link:orange:wlan"; |
||||
gpios = <&gpio 0 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
}; |
Loading…
Reference in new issue