Specification: - SoC: Qualcomm Atheros QCA9533 (560 MHz, MIPS 24Kc) - RAM: 32 MiB - Storage: 4 MiB of Flash on board - Wireless: Built into QCA9533 (Honey Bee), PHY modes b/g/n - Ethernet: 1x100M (port0) Installation through OEM Web Interface: - Connect to TL-WR802N by Ethernet or Wi-Fi - Go to web interface: [V1] http://192.168.0.1 [V2] http://192.168.0.254 Default user is "admin" & password is "admin". On V2, there is no DHCP server running by default, so remember to set IP manually. - Go to "System Tools -> Firmware Upgrade" - Browse for firmware: [V1] "*.factory.bin" [V2] "*.factory-us.bin" or "*.factory-eu.bin" for eu model Web interface may complain if filename is too long. In such case, rename .bin to something shorter. - Click upgrade Installation through tftp: Note: T_OUT, T_IN and GND on the board must be connected to USB TTL Serial Configuration 115200 8n1 - Boot the TL-WR802N - When "Autobooting in 1 seconds" appears type "tpl" followed by enter - Connect to the board Ethernet port (IPADDR: 192.168.1.1, ServerIP: 192.168.1.10) - tftpboot 0x80000000 <Firmware Image Name> - Record the result of "printenv bootcmd" - Enter "erase <Result of 'printenv bootcmd'> +0x3c0000" (e.g erase 0x9f020000 +0x3c0000) - Enter "cp.b 0x80000000 <Result of 'printenv bootcmd'> 0x3c0000" (e.g cp.b 0x80000000 0x9f020000 0x3c0000) - Enter "bootm <Result of 'printenv bootcmd'>" (e.g bootm 0x9f020000) Notes: When porting from ar71xx target to ath79, I found out that on V2, reset button is on GPIO12 and active low, instead of GPIO11 and active high. By cross-flashing V1 firmware to V2, I confirmed the same is true for V1. Also according to manual of V1, this one also has green LED instead of blue - both of those issues were fixed accordingly. The MAC address assignment has been checked with OEM firmware. Installation manual based on ar71xx support by Thomas Roberts Signed-off-by: Lech Perczak <lech.perczak@gmail.com> [slightly adjust commit message, add MAC address comment] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 7e513136c63108bf55b38be4d2b65aa00b0d2b26)master
parent
6488d2f7cc
commit
e752fc1ff9
@ -0,0 +1,9 @@ |
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||
/dts-v1/; |
||||
|
||||
#include "qca9533_tplink_tl-wr802n.dtsi" |
||||
|
||||
/ { |
||||
model = "TP-Link TL-WR802N v1"; |
||||
compatible = "tplink,tl-wr802n-v1", "qca,qca9533"; |
||||
}; |
@ -0,0 +1,9 @@ |
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||
/dts-v1/; |
||||
|
||||
#include "qca9533_tplink_tl-wr802n.dtsi" |
||||
|
||||
/ { |
||||
model = "TP-Link TL-WR802N v2"; |
||||
compatible = "tplink,tl-wr802n-v2", "qca,qca9533"; |
||||
}; |
@ -0,0 +1,98 @@ |
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||
|
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
#include "qca953x.dtsi" |
||||
|
||||
/ { |
||||
chosen { |
||||
bootargs = "console=ttyS0,115200n8"; |
||||
}; |
||||
|
||||
aliases { |
||||
led-boot = &led_system; |
||||
led-failsafe = &led_system; |
||||
led-running = &led_system; |
||||
led-upgrade = &led_system; |
||||
}; |
||||
|
||||
leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
led_system: system { |
||||
label = "tp-link:green:system"; |
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
|
||||
keys { |
||||
compatible = "gpio-keys"; |
||||
|
||||
reset { |
||||
label = "Reset button"; |
||||
linux,code = <KEY_RESTART>; |
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&uart { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&spi { |
||||
status = "okay"; |
||||
|
||||
num-cs = <1>; |
||||
|
||||
flash@0 { |
||||
compatible = "jedec,spi-nor"; |
||||
reg = <0>; |
||||
spi-max-frequency = <50000000>; |
||||
|
||||
partitions { |
||||
compatible = "fixed-partitions"; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
|
||||
uboot: partition@0 { |
||||
label = "u-boot"; |
||||
reg = <0x000000 0x020000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@20000 { |
||||
label = "firmware"; |
||||
reg = <0x020000 0x3d0000>; |
||||
compatible = "tplink,firmware"; |
||||
}; |
||||
|
||||
art: partition@3f0000 { |
||||
label = "art"; |
||||
reg = <0x3f0000 0x010000>; |
||||
read-only; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&wmac { |
||||
status = "okay"; |
||||
|
||||
mtd-cal-data = <&art 0x1000>; |
||||
mtd-mac-address = <&uboot 0x1fc00>; |
||||
}; |
||||
|
||||
ð0 { |
||||
status = "okay"; |
||||
|
||||
phy-handle = <&swphy4>; |
||||
|
||||
mtd-mac-address = <&uboot 0x1fc00>; |
||||
mtd-mac-address-increment = <1>; |
||||
}; |
||||
|
||||
ð1 { |
||||
compatible = "syscon", "simple-mfd"; |
||||
}; |
Loading…
Reference in new issue