This adds support for a popular low-cost 2.4GHz N based AP Specifications: SoC: Qualcomm Atheros QCA9533 (650MHz) RAM: 64MB Storage: 8 MB SPI NOR Wireless: 2.4GHz N based built into SoC 2x2 Ethernet: 2x 100/10 Mbps, integrated into SoC Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 This also applies some minor changes to the common DTSI: - use &wmac for label-mac-device, as this one is actually set up in common DTSI - move ð0 to parent DTSI - fix several leading spaces, added/removed newlines Signed-off-by: Andrew Cameron <apcameron@softhome.net> [DTS style fixes/improvements, updated commit message/title, backport to 19.07] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>master
parent
44c827215d
commit
19ff3f5105
@ -0,0 +1,33 @@ |
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||
/dts-v1/; |
||||
|
||||
#include "qca9533_tplink_cpexxx.dtsi" |
||||
|
||||
/ { |
||||
compatible = "tplink,cpe220-v3", "qca,qca9533"; |
||||
model = "TP-Link CPE220 v3"; |
||||
}; |
||||
|
||||
&leds { |
||||
lan0 { |
||||
label = "tp-link:green:lan0"; |
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
lan1 { |
||||
label = "tp-link:green:lan1"; |
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
|
||||
ð1 { |
||||
status = "okay"; |
||||
|
||||
mtd-mac-address = <&info 0x8>; |
||||
|
||||
gmac-config { |
||||
device = <&gmac>; |
||||
switch-phy-swap = <0>; |
||||
switch-only-mode = <1>; |
||||
}; |
||||
}; |
@ -0,0 +1,130 @@ |
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||
/dts-v1/; |
||||
|
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
#include "qca953x.dtsi" |
||||
|
||||
/ { |
||||
chosen { |
||||
bootargs = "console=ttyS0,115200n8"; |
||||
}; |
||||
|
||||
aliases { |
||||
led-boot = &led_link4; |
||||
led-failsafe = &led_link4; |
||||
led-running = &led_link4; |
||||
led-upgrade = &led_link4; |
||||
}; |
||||
|
||||
leds: leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
link1 { |
||||
label = "tp-link:green:link1"; |
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
link2 { |
||||
label = "tp-link:green:link2"; |
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
link3 { |
||||
label = "tp-link:green:link3"; |
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
led_link4: link4 { |
||||
label = "tp-link:green:link4"; |
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
|
||||
keys { |
||||
compatible = "gpio-keys-polled"; |
||||
poll-interval = <100>; |
||||
|
||||
reset_button { |
||||
label = "Reset button"; |
||||
linux,code = <KEY_RESTART>; |
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&uart { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&spi { |
||||
status = "okay"; |
||||
|
||||
num-cs = <1>; |
||||
|
||||
flash@0 { |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
compatible = "jedec,spi-nor"; |
||||
reg = <0>; |
||||
spi-max-frequency = <25000000>; |
||||
|
||||
partitions { |
||||
compatible = "fixed-partitions"; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
|
||||
uboot: partition@0 { |
||||
label = "u-boot"; |
||||
reg = <0x000000 0x020000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@20000 { |
||||
label = "partition-table"; |
||||
reg = <0x020000 0x010000>; |
||||
read-only; |
||||
}; |
||||
|
||||
info: partition@30000 { |
||||
label = "info"; |
||||
reg = <0x030000 0x010000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@40000 { |
||||
label = "firmware"; |
||||
reg = <0x040000 0x780000>; |
||||
compatible = "tplink,firmware"; |
||||
}; |
||||
|
||||
config: partition@7c0000 { |
||||
label = "config"; |
||||
reg = <0x7c0000 0x030000>; |
||||
read-only; |
||||
}; |
||||
|
||||
art: partition@7f0000 { |
||||
label = "art"; |
||||
reg = <0x7f0000 0x010000>; |
||||
read-only; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&wmac { |
||||
status = "okay"; |
||||
|
||||
mtd-cal-data = <&art 0x1000>; |
||||
mtd-mac-address = <&info 0x8>; |
||||
}; |
||||
|
||||
ð0 { |
||||
status = "okay"; |
||||
|
||||
phy-handle = <&swphy4>; |
||||
|
||||
mtd-mac-address = <&info 0x8>; |
||||
}; |
Loading…
Reference in new issue