ath79: add support for TP-Link TL-WA901ND v4 and v5

This ports support for the TL-WA901ND v4 and v5 from ar71xx to ath79.
They are similar to the TP9343-based TL-WR940N v3/v4 and TL-WR941ND v6.

Specifications:
  SoC: TP9343
  Flash/RAM: 4/32 MiB
  CPU: 750 MHz
  WiFi: 2.4 GHz b/g/n
  Ethernet: 1 port (100M)

Flashing instructions:
  Upload the factory image via the vendor firmware upgrade option.

Flash instruction (TFTP):
  1. Set PC to fixed ip address 192.168.0.66
  2. Download *-factory.bin image and rename it to * (see below)
  3. Start a tftp server with the image file in its root directory
  4. Turn off the router
  5. Press and hold Reset button
  6. Turn on router with the reset button pressed and wait ~15 seconds
  7. Release the reset button and after a short time
     the firmware should be transferred from the tftp server
  8. Wait ~30 second to complete recovery.

  * The image name for TFTP recovery is wa901ndv4_tp_recovery.bin for
  both variants.

In ar71xx, a MAC address with offset 1 was used for ethernet port.
That's probably wrong, but this commit sticks to it until we know
the correct value.

Like in ar71xx, this builds the default factory.bin with EU country
code.

Thanks to Leonardo Weiss for testing on the v5.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(backported from commit 4a61a88f9006f70444e00699f76551c75f73c14e)
master
Adrian Schmutzler 5 years ago
parent a6f70f2e97
commit 6a89098935
  1. 4
      target/linux/ath79/base-files/etc/board.d/01_leds
  2. 2
      target/linux/ath79/base-files/etc/board.d/02_network
  3. 9
      target/linux/ath79/dts/tp9343_tplink_tl-wa901nd-v4.dts
  4. 9
      target/linux/ath79/dts/tp9343_tplink_tl-wa901nd-v5.dts
  5. 52
      target/linux/ath79/dts/tp9343_tplink_tl-wa901nd.dtsi
  6. 69
      target/linux/ath79/dts/tp9343_tplink_tl-wr94x.dtsi
  7. 72
      target/linux/ath79/dts/tp9343_tplink_tl-wx.dtsi
  8. 20
      target/linux/ath79/image/tiny-tp-link.mk

@ -180,7 +180,9 @@ tplink,tl-wa730re-v1|\
tplink,tl-wa801nd-v1|\
tplink,tl-wa830re-v1|\
tplink,tl-wa860re-v1|\
tplink,tl-wa901nd-v1)
tplink,tl-wa901nd-v1|\
tplink,tl-wa901nd-v4|\
tplink,tl-wa901nd-v5)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
;;
tplink,tl-mr3420-v2|\

@ -39,6 +39,8 @@ ath79_setup_interfaces()
tplink,tl-wa860re-v1|\
tplink,tl-wa901nd-v1|\
tplink,tl-wa901nd-v2|\
tplink,tl-wa901nd-v4|\
tplink,tl-wa901nd-v5|\
tplink,tl-wr703n|\
ubnt,bullet-m|\
ubnt,bullet-m-xw|\

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "tp9343_tplink_tl-wa901nd.dtsi"
/ {
compatible = "tplink,tl-wa901nd-v4", "qca,tp9343";
model = "TP-Link TL-WA901ND v4";
};

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "tp9343_tplink_tl-wa901nd.dtsi"
/ {
compatible = "tplink,tl-wa901nd-v5", "qca,tp9343";
model = "TP-Link TL-WA901ND v5";
};

@ -0,0 +1,52 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "tp9343_tplink_tl-wx.dtsi"
/ {
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led_system: system {
label = "tp-link:green:system";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
default-state = "on";
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
lan {
label = "tp-link:green:lan";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};
&eth1 {
compatible = "syscon", "simple-mfd";
};

@ -1,16 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
#include "tp9343_tplink_tl-wx.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200n8";
};
keys {
compatible = "gpio-keys";
@ -27,63 +20,3 @@
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x3d0000>;
};
art: partition@3f0000 {
label = "art";
reg = <0x3f0000 0x010000>;
read-only;
};
};
};
};
&uart {
status = "okay";
};
&eth0 {
status = "okay";
phy-mode = "mii";
phy-handle = <&swphy4>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
};
&eth1 {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

@ -0,0 +1,72 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200n8";
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x3d0000>;
};
art: partition@3f0000 {
label = "art";
reg = <0x3f0000 0x010000>;
read-only;
};
};
};
};
&uart {
status = "okay";
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
};
&eth1 {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

@ -134,6 +134,26 @@ define Device/tplink_tl-wa901nd-v2
endef
TARGET_DEVICES += tplink_tl-wa901nd-v2
define Device/tplink_tl-wa901nd-v4
$(Device/tplink-4mlzma)
ATH_SOC := tp9343
DEVICE_TITLE := TP-Link TL-WA901ND v4
TPLINK_HWID := 0x09010004
SUPPORTED_DEVICES += tl-wa901nd-v4
IMAGE/factory.bin := append-rootfs | mktplinkfw factory -C EU
endef
TARGET_DEVICES += tplink_tl-wa901nd-v4
define Device/tplink_tl-wa901nd-v5
$(Device/tplink-4mlzma)
ATH_SOC := tp9343
DEVICE_TITLE := TP-Link TL-WA901ND v5
TPLINK_HWID := 0x09010005
SUPPORTED_DEVICES += tl-wa901nd-v5
IMAGE/factory.bin := append-rootfs | mktplinkfw factory -C EU
endef
TARGET_DEVICES += tplink_tl-wa901nd-v5
define Device/tplink_tl-wr703n
$(Device/tplink-4mlzma)
ATH_SOC := ar9331

Loading…
Cancel
Save