- Add a lockStat type to group counters
- Remove unnecessary helper functions
- Fix stats computation on force unlock
- Removed unnecessary checks and cleaned up comments
This is to utilize an optimized version of
sha256 checksum which @fwessels implemented.
blake2b lacks such optimizations on ARM platform,
this can provide us significant boost in performance.
blake2b on ARM64 as expected would be slower.
```
BenchmarkSize1K-4 30000 44015 ns/op 23.26 MB/s
BenchmarkSize8K-4 5000 335448 ns/op 24.42 MB/s
BenchmarkSize32K-4 1000 1333960 ns/op 24.56 MB/s
BenchmarkSize128K-4 300 5328286 ns/op 24.60 MB/s
```
sha256 on ARM64 is faster by orders of magnitude giving close to
AVX performance of blake2b.
```
BenchmarkHash8Bytes-4 1000000 1446 ns/op 5.53 MB/s
BenchmarkHash1K-4 500000 3229 ns/op 317.12 MB/s
BenchmarkHash8K-4 100000 14430 ns/op 567.69 MB/s
BenchmarkHash1M-4 1000 1640126 ns/op 639.33 MB/s
```
ObjectLayer GetObject() now returns the entire object
if starting offset is 0 and length is negative. This
also allows to simplify handler layer code where
we always had to use GetObjectInfo() before proceeding
to read bucket metadata files examples `policy.json`.
This also reduces one additional call overhead.
success_action_redirect in the sent Form means that the server needs to return 303 in addition to a well specific redirection url, this commit adds this feature
This is important in a distributed setup, where the server hosting the
first disk formats a fresh setup. Sorting ensures that all servers
arrive at the same 'first' server.
Note: This change doesn't protect against different disk arguments
with some disks being same across servers.
Previously, more than one goroutine calls RPCClient.dial(), each
goroutine gets a new rpc.Client but only one such client is stored
into RPCClient object. This leads to leaky connection at the server
side. This is fixed by taking lock at top of dial() and release on
return.
There was an error in how we validated disk formats,
if one of the disk was formatted and was formatted with
FS would cause confusion and object layer would never
initialize essentially go into an infinite loop.
Validate pre-emptively and also check for FS format
properly.
This is implemented so that the issues like in the
following flow don't affect the behavior of operation.
```
GetObjectInfo()
.... --> Time window for mutation (no lock held)
.... --> Time window for mutation (no lock held)
GetObject()
```
This happens when two simultaneous uploads are made
to the same object the object has returned wrong
info to the client.
Another classic example is "CopyObject" API itself
which reads from a source object and copies to
destination object.
Fixes#3370Fixes#2912
FS/Multipart: Fix race between PutObjectPart and Complete/Abort multipart. close(timeoutCh) on complete/abort so that a racing PutObjectPart does not leave a dangling go-routine.
Fixes#3351
This change brings in changes at multiple places
- Reuse buffers at almost all locations ranging
from rpc, fs, xl, checksum etc.
- Change caching behavior to disable itself
under low memory conditions i.e < 8GB of RAM.
- Only objects cached are of size 1/10th the size
of the cache for example if 4GB is the cache size
the maximum object size which will be cached
is going to be 400MB. This change is an
optimization to cache more objects rather
than few larger objects.
- If object cache is enabled default GC
percent has been reduced to 20% in lieu
with newly found behavior of GC. If the cache
utilization reaches 75% of the maximum value
GC percent is reduced to 10% to make GC
more aggressive.
- Do not use *bytes.Buffer* due to its growth
requirements. For every allocation *bytes.Buffer*
allocates an additional buffer for its internal
purposes. This is undesirable for us, so
implemented a new cappedWriter which is capped to a
desired size, beyond this all writes rejected.
Possible fix for #3403.
- This is to ensure that the any new config references made to the
serverConfig is also backed by a mutex lock.
- Otherwise any new config assigment will also replace the member mutex
which is currently used for safe access.
EOF err message in Peek Protocol is shown when a client closes the
connection in the middle of peek protocol, this commit hides it since it
doesn't make sense to show it
Krishnan Parthasarathi