3.2 KiB

Raw Blame History

Minio FreeBSD Quickstart Guide

Minio with ZFS backend - FreeBSD

This example assumes that you have a FreeBSD 10.x running

Step 1.

As root on the FreeBSD edit /etc/rc.conf


zfs_enable="YES"

Start ZFS service


 service zfs start


 dd if=/dev/zero of=/zfs bs=1M count=4000

Configure a loopback device on the /zfs file.


 mdconfig -a -t vnode -f /zfs

Create zfs pool


 zpool create minio-example /dev/md0


 df /minio-example
Filesystem    512-blocks Used   Avail Capacity  Mounted on
minio-example    7872440   38 7872402     0%    /minio-example

Verify if it is writable


touch /minio-example/testfile
 ls -l /minio-example/testfile
-rw-r--r--  1 root  wheel  0 Apr 26 00:51 /minio-example/testfile

Now you have successfully created a ZFS pool for further reading please refer to ZFS Quickstart Guide

However, this pool is not taking advantage of any ZFS features, so let's create a ZFS filesytem on this pool with compression enabled. ZFS supports many compression algorithms: lzjb, gzip, zle, lz4. LZ4 is often the most performant algorithm in terms of compression of data versus system overhead.


 zfs create minio-example/compressed-objects
 zfs set compression=lz4 minio-example/compressed-objects

To keep monitoring your pool use


 zpool status
  pool: minio-example
 state: ONLINE
  scan: none requested
config:

	NAME        STATE     READ WRITE CKSUM
	minio-example  ONLINE       0     0     0
	  md0       ONLINE       0     0     0

errors: No known data errors

Step 2.

Now start minio server on the /minio-example/compressed-objects, change the permissions such that this directory is accessibly by a normal user


 chown -R minio-user:minio-user /minio-example/compressed-objects

Now login as minio-user and start minio server.


curl https://dl.minio.io/server/minio/release/freebsd-amd64/minio > minio
chmod 755 minio
./minio server /minio-example/compressed-objects

Point your browser to http://localhost:9000 and login with the credentials displayed on the command line.

Now you have a S3 compatible server running on top of your ZFS backend which transparently provides disk level compression for your uploaded objects.

Thanks for using Minio, awaiting feedback :-)

Building Minio Server From Source

It is possible to build the minio server from source on FreeBSD. To do this we will used the golang distribution provided by the FreeBSD pkg infrastructure.

We will need to install golang and GNU make:

sudo pkg install go gmake

Now we can proceed with the normal build process of minio server as found here. The only caveat is we need to specify gmake (GNU make) when building minio server as the current Makefile is not BSD make compatible:

From here you can start the server as you would with a precompiled minio server build.

3.2 KiB Raw Blame History