You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
239 lines
8.6 KiB
239 lines
8.6 KiB
# How to secure access to MinIO server with TLS [](https://slack.min.io)
|
|
|
|
This guide explains how to configure MinIO Server with TLS certificates on Linux and Windows platforms.
|
|
|
|
1. [Install MinIO Server](#install-minio-server)
|
|
2. [Use an Existing Key and Certificate with MinIO](#use-an-existing-key-and-certificate-with-minio)
|
|
3. [Generate and use Self-signed Keys and Certificates with MinIO](#generate-use-self-signed-keys-certificates)
|
|
4. [Install Certificates from Third-party CAs](#install-certificates-from-third-party-cas)
|
|
|
|
## <a name="install-minio-server"></a>1. Install MinIO Server
|
|
|
|
Install MinIO Server using the instructions in the [MinIO Quickstart Guide](http://docs.min.io/docs/minio-quickstart-guide).
|
|
|
|
## <a name="use-an-existing-key-and-certificate-with-minio"></a>2. Use an Existing Key and Certificate with MinIO
|
|
|
|
This section describes how to use a private key and public certificate that have been obtained from a certificate authority (CA). If these files have not been obtained, skip to [3. Generate Self-signed Certificates](#generate-use-self-signed-keys-certificates) or generate them with [Let's Encrypt](https://letsencrypt.org) using these instructions: [Generate Let's Encrypt certificate using Certbot for MinIO](https://docs.min.io/docs/generate-let-s-encypt-certificate-using-concert-for-minio.html).
|
|
|
|
Copy the existing private key and public certificate to the `certs` directory. The default certs directory is:
|
|
* **Linux:** `${HOME}/.minio/certs`
|
|
* **Windows:** `%%USERPROFILE%%\.minio\certs`
|
|
|
|
**Note:**
|
|
* Location of custom certs directory can be specified using `--certs-dir` command line option.
|
|
* Inside the `certs` directory, the private key must by named `private.key` and the public key must be named `public.crt`.
|
|
* A certificate signed by a CA contains information about the issued identity (e.g. name, expiry, public key) and any intermediate certificates. The root CA is not included.
|
|
|
|
## <a name="generate-use-self-signed-keys-certificates"></a>3. Generate and use Self-signed Keys and Certificates with MinIO
|
|
|
|
This section describes how to generate a self-signed certificate using various tools:
|
|
|
|
* 3.1 [Use generate_cert.go to Generate a Certificate](#using-go)
|
|
* 3.2 [Use OpenSSL to Generate a Certificate](#using-open-ssl)
|
|
* 3.3 [Use OpenSSL (with IP address) to Generate a Certificate](#using-open-ssl-with-ip)
|
|
* 3.4 [Use GnuTLS (for Windows) to Generate a Certificate](#using-gnu-tls)
|
|
|
|
**Note:**
|
|
* MinIO only supports keys and certificates in PEM format on Linux and Windows.
|
|
* MinIO doesn't currently support PFX certificates.
|
|
|
|
### <a name="using-go"></a>3.1 Use generate_cert.go to Generate a Certificate
|
|
|
|
Download [`generate_cert.go`](https://golang.org/src/crypto/tls/generate_cert.go?m=text).
|
|
|
|
`generate_cert.go` is a simple *Go* tool to generate self-signed certificates, and provides SAN certificates with DNS and IP entries:
|
|
|
|
```sh
|
|
go run generate_cert.go -ca --host "10.10.0.3"
|
|
```
|
|
|
|
A response similar to this one should be displayed:
|
|
|
|
```
|
|
2018/11/21 10:16:18 wrote cert.pem
|
|
2018/11/21 10:16:18 wrote key.pem
|
|
```
|
|
|
|
Rename `cert.pem` to `public.crt` and `key.pem` to `private.key`.
|
|
|
|
### <a name="using-open-ssl"></a>3.2 Use OpenSSL to Generate a Certificate
|
|
|
|
Use one of the following methods to generate a certificate using `openssl`:
|
|
|
|
* 3.2.1 [Generate a private key with ECDSA](#generate-private-key-with-ecdsa)
|
|
* 3.2.2 [Generate a private key with RSA](#generate-private-key-with-rsa)
|
|
* 3.2.3 [Generate a self-signed certificate](#generate-a-self-signed-certificate)
|
|
|
|
#### 3.2.1 <a name="generate-private-key-with-ecdsa"></a>Generate a private key with ECDSA.
|
|
|
|
Use the following command to generate a private key with ECDSA:
|
|
|
|
```sh
|
|
openssl ecparam -genkey -name prime256v1 | openssl ec -out private.key
|
|
```
|
|
|
|
A response similar to this one should be displayed:
|
|
|
|
```
|
|
read EC key
|
|
writing EC key
|
|
```
|
|
|
|
Alternatively, use the following command to generate a private ECDSA key protected by a password:
|
|
|
|
```sh
|
|
openssl ecparam -genkey -name prime256v1 | openssl ec -aes256 -out private.key -passout pass:PASSWORD
|
|
```
|
|
|
|
**Note:** NIST curves P-384 and P-521 are not currently supported.
|
|
|
|
#### 3.2.2 <a name="generate-private-key-with-rsa"></a>Generate a private key with RSA.
|
|
|
|
Use the following command to generate a private key with RSA:
|
|
|
|
```sh
|
|
openssl genrsa -out private.key 2048
|
|
```
|
|
A response similar to this one should be displayed:
|
|
|
|
```
|
|
Generating RSA private key, 2048 bit long modulus
|
|
............................................+++
|
|
...........+++
|
|
e is 65537 (0x10001)
|
|
```
|
|
|
|
Alternatively, use the following command to generate a private RSA key protected by a password:
|
|
|
|
```sh
|
|
openssl genrsa -aes256 -passout pass:PASSWORD -out private.key 2048
|
|
```
|
|
|
|
**Note:** When using a password-protected private key, the password must be provided through the environment variable `MINIO_CERT_PASSWD` using the following command:
|
|
|
|
```sh
|
|
export MINIO_CERT_PASSWD=<PASSWORD>
|
|
```
|
|
|
|
The default OpenSSL format for private encrypted keys is PKCS-8, but MinIO only supports PKCS-1. An RSA key that has been formatted with PKCS-8 can be converted to PKCS-1 using the following command:
|
|
|
|
```sh
|
|
openssl rsa -in private-pkcs8-key.key -aes256 -passout pass:PASSWORD -out private.key
|
|
```
|
|
|
|
#### <a name="generate-a-self-signed-certificate"></a>3.2.3 Generate a self-signed certificate.
|
|
|
|
Create a file named `openssl.conf` with the content below. Set `IP.1` and/or `DNS.1` to point to the correct IP/DNS addresses:
|
|
|
|
```sh
|
|
[req]
|
|
distinguished_name = req_distinguished_name
|
|
x509_extensions = v3_req
|
|
prompt = no
|
|
|
|
[req_distinguished_name]
|
|
C = US
|
|
ST = VA
|
|
L = Somewhere
|
|
O = MyOrg
|
|
OU = MyOU
|
|
CN = MyServerName
|
|
|
|
[v3_req]
|
|
subjectAltName = @alt_names
|
|
|
|
[alt_names]
|
|
IP.1 = 127.0.0.1
|
|
DNS.1 = localhost
|
|
```
|
|
|
|
Run `openssl` by specifying the configuration file and enter a passphrase if prompted:
|
|
|
|
```sh
|
|
openssl req -x509 -nodes -days 730 -key private.key -out public.crt -config openssl.conf
|
|
```
|
|
|
|
### <a name="using-gnu-tls"></a>3.3 Use GnuTLS (for Windows) to Generate a Certificate
|
|
|
|
This section describes how to use GnuTLS on Windows to generate a certificate.
|
|
|
|
#### 3.3.1 Install and configure GnuTLS.
|
|
Download and decompress the Windows version of GnuTLS from [here](http://www.gnutls.org/download.html).
|
|
|
|
Use PowerShell to add the path of the extracted GnuTLS binary to the system path:
|
|
|
|
```
|
|
setx path "%path%;C:\Users\MyUser\Downloads\gnutls-3.4.9-w64\bin"
|
|
```
|
|
|
|
**Note:** PowerShell may need to be restarted for this change to take effect.
|
|
|
|
#### 3.3.2 Generate a private key:
|
|
Run the following command to generate a private `.key` file:
|
|
|
|
```
|
|
certtool.exe --generate-privkey --outfile private.key
|
|
```
|
|
|
|
A response similar to this one should be displayed:
|
|
|
|
```
|
|
Generating a 3072 bit RSA private key...
|
|
```
|
|
|
|
#### 3.3.3 Generate a public certificate:
|
|
|
|
Create a file called `cert.cnf` with the content below. This file contains all of the information necessary to generate a certificate using `certtool.exe`:
|
|
|
|
```
|
|
# X.509 Certificate options
|
|
#
|
|
# DN options
|
|
|
|
# The organization of the subject.
|
|
organization = "Example Inc."
|
|
|
|
# The organizational unit of the subject.
|
|
#unit = "sleeping dept."
|
|
|
|
# The state of the certificate owner.
|
|
state = "Example"
|
|
|
|
# The country of the subject. Two letter code.
|
|
country = "EX"
|
|
|
|
# The common name of the certificate owner.
|
|
cn = "Sally Certowner"
|
|
|
|
# In how many days, counting from today, this certificate will expire.
|
|
expiration_days = 365
|
|
|
|
# X.509 v3 extensions
|
|
|
|
# DNS name(s) of the server
|
|
dns_name = "localhost"
|
|
|
|
# (Optional) Server IP address
|
|
ip_address = "127.0.0.1"
|
|
|
|
# Whether this certificate will be used for a TLS server
|
|
tls_www_server
|
|
```
|
|
|
|
Run `certtool.exe` and specify the configuration file to generate a certificate:
|
|
|
|
```
|
|
certtool.exe --generate-self-signed --load-privkey private.key --template cert.cnf --outfile public.crt
|
|
```
|
|
|
|
## <a name="install-certificates-from-third-party-cas"></a>4. Install Certificates from Third-party CAs
|
|
|
|
MinIO can connect to other servers, including MinIO nodes or other server types such as NATs and Redis. If these servers use certificates that were not registered with a known CA, add trust for these certificates to MinIO Server by placing these certificates under one of the following MinIO configuration paths:
|
|
* **Linux:** `~/.minio/certs/CAs/`
|
|
* **Windows**: `C:\Users\<Username>\.minio\certs\CAs`
|
|
|
|
# Explore Further
|
|
* [TLS Configuration for MinIO server on Kubernetes](https://github.com/minio/minio/tree/master/docs/tls/kubernetes)
|
|
* [MinIO Client Complete Guide](https://docs.min.io/docs/minio-client-complete-guide)
|
|
* [Generate Let's Encrypt Certificate](https://docs.min.io/docs/generate-let-s-encypt-certificate-using-concert-for-minio)
|
|
* [Setup nginx Proxy with MinIO Server](https://docs.min.io/docs/setup-nginx-proxy-with-minio)
|
|
|