You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

John Crispin 074cc7ac38 ramips: mt7620: fix failsafe switch config ... As indicated in the bug tracker[1], failsafe mode is broken on at least some devices using the mt7620 switch (and possibly mt7621). The thread explicitly mentions the Xiaomi MiWifi, and the Nexx WT3020, and an unspecified device using the mt7621 switch; the issue also applies to the Netgear EX2700. The problem is that failsafe mode uses eth0, but enable_vlan is always set to 1 by the switch driver. Connecting to and/or pinging the device fails. This patch fixes the failsafe preinit config, by making sure that vlan support is disabled. It currently only fixes the switch config on mt7620, but might apply to the mt7621 as well, so the patch has been designed with this in mind. A similar (line wrapped) patch was submitted in December by Simon Peter, but never accepted and/or discussed. This patch applies to both Chaos Calmer and trunk. [1] https://dev.openwrt.org/ticket/18768 Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> SVN-Revision: 48772		9 years ago
..
base-files	ramips: mt7620: fix failsafe switch config	9 years ago
dts	ramips: fix WSR-1166 partition table	9 years ago
image	ramips: build factory images for Netgear EX2700	9 years ago
mt7620	ramips: Add support for Phicomm PSG1208	9 years ago
mt7621	ramips: re-enable highmem support for MT7621 now that it's fixed	9 years ago
mt7628	…
mt7688	…
patches-4.3	ralink: fix mt7628 ehci support	9 years ago
rt288x	…
rt305x	…
rt3883	…
Makefile	ramips: set mips16 support	9 years ago
modules.mk	ramips: delete the broken sound driver	9 years ago