You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
Michael Büsch 6da37f79c5 cmake: Pass VERBOSE=1 to the generated makefile to reveal flags and commands in a verbose openwrt build. 14 years ago
docs docs: fix a counting fail 15 years ago
include cmake: Pass VERBOSE=1 to the generated makefile to reveal flags and commands in a verbose openwrt build. 14 years ago
package * reorder patches 14 years ago
scripts scripts/diffconfig.sh: use the new kconfig mode to remove some more unnecessary entries in the generated output 14 years ago
target * adds ath5k platform support * adds several new profiles 14 years ago
toolchain autodetect ARM variant/ABI setup based on the compiler settings 14 years ago
tools libtool: fix misspelled procedure name... 14 years ago
.gitignore .gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default 14 years ago
BSDmakefile add missing copyright header 18 years ago
Config.in prepare support for libiconv, libintl stub/full switching 14 years ago
LICENSE finally move buildroot-ng to trunk 9 years ago
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 15 years ago
README remove bison requirement (see [10398] & [14900]) 15 years ago
feeds.conf.default switch to LuCI trunk, should be stable enough for common use now 14 years ago
rules.mk remove support for disabling large file support, it is broken, breaks compatibility to anything and has no effect on most packages 14 years ago

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain,
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
Your OpenWrt Project
http://openwrt.org