You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Roman Yeryomin 156f2df879 ipq806x: ipq4019: add ap-dk01.1-c1 board support ... AP-DK01.1-C1 is QCA dev board with: - ipq4018 quad core ARM @716.8MHz, 2x2 dual (11n+11ac) radio - 256MB RAM - 32MB SPI flash - QCA8075 multiport ethernet phy (WAN port, 4x LAN ports) First installation via u-boot: sf probe sf erase 0x180000 0x1a00000 tftpboot 0x84000000 lede-ipq806x-AP-DK01.1-C1-squashfs-sysupgrade.bin sf write 0x84000000 0x180000 $filesize Further upgrades via sysupgrade. Changes: - add partitions - set memory size to 256MB - add reserved memory mapping - add correct compatible string - add image generation - extract pre-cal data from ART partition Compile and run tested. Wirespeed NAT can be achieved with spreading rx interrupts over different cores. Wifi speed is ~550Mbps @5GHz in open air. Note: AP-DK01.1-C1 is fully compatible with AP-DK01.2-C1, which has ipq4028 instead of ipq4018 on board. Changes since v2: - based on dts(i) rework/cleanup submitted: http://lists.infradead.org/pipermail/lede-dev/2017-October/009596.html - precise reserved memory mapping - more precise description - compatible string Signed-off-by: Roman Yeryomin <roman@advem.lv>		7 years ago
..
base-files	ipq806x: ipq4019: add ap-dk01.1-c1 board support	7 years ago
files-4.4/arch/arm/boot/dts	…
files-4.9/arch/arm/boot/dts	ipq806x: ipq4019: dts: fix maximum cpu speed	7 years ago
image	ipq806x: ipq4019: add ap-dk01.1-c1 board support	7 years ago
patches-4.9	ipq806x: ipq4019: add ap-dk01.1-c1 board support	7 years ago
profiles	…
Makefile	ipq806x: set v4.9 as default	8 years ago
config-4.9	kernel: cleanup CONFIG_SCHED_HRTICK	7 years ago
modules.mk	Revert "ipq806x: make the dwc3 driver and required phy drivers built-in"	8 years ago