ipq806x: ipq4019: add ap-dk01.1-c1 board support

AP-DK01.1-C1 is QCA dev board with: - ipq4018 quad core ARM @716.8MHz, 2x2 dual (11n+11ac) radio - 256MB RAM - 32MB SPI flash - QCA8075 multiport ethernet phy (WAN port, 4x LAN ports) First installation via u-boot: sf probe sf erase 0x180000 0x1a00000 tftpboot 0x84000000 lede-ipq806x-AP-DK01.1-C1-squashfs-sysupgrade.bin sf write 0x84000000 0x180000 $filesize Further upgrades via sysupgrade. Changes: - add partitions - set memory size to 256MB - add reserved memory mapping - add correct compatible string - add image generation - extract pre-cal data from ART partition Compile and run tested. Wirespeed NAT can be achieved with spreading rx interrupts over different cores. Wifi speed is ~550Mbps @5GHz in open air. Note: AP-DK01.1-C1 is fully compatible with AP-DK01.2-C1, which has ipq4028 instead of ipq4018 on board. Changes since v2: - based on dts(i) rework/cleanup submitted: http://lists.infradead.org/pipermail/lede-dev/2017-October/009596.html - precise reserved memory mapping - more precise description - compatible string Signed-off-by: Roman Yeryomin <roman@advem.lv>
7 years ago · 156f2df879
parent a22e2bd37d
commit 156f2df879
5 changed files with 151 additions and 1 deletions
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@ -47,6 +47,9 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath10k/pre-cal-ahb-a000000.wifi.bin")
 	case "$board" in
+	ap-dk01.1-c1)
+		ath10kcal_extract "ART" 4096 12064
+		;;
 	fritz4040)
 		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 		;;
@ -54,6 +57,9 @@ case "$FIRMWARE" in
 	;;
 "ath10k/pre-cal-ahb-a800000.wifi.bin")
 	case "$board" in
+	ap-dk01.1-c1)
+		ath10kcal_extract "ART" 20480 12064
+		;;
 	fritz4040)
 		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 		;;
--- a/target/linux/ipq806x/base-files/lib/ipq806x.sh
+++ b/target/linux/ipq806x/base-files/lib/ipq806x.sh
@ -14,6 +14,9 @@ ipq806x_board_detect() {
 	machine=$(cat /proc/device-tree/model)

 	case "$machine" in
+	*"AP-DK01.1-C1")
+		name="ap-dk01.1-c1"
+		;;
 	*"AP148")
 		name="ap148"
 		;;
--- a/target/linux/ipq806x/image/Makefile
+++ b/target/linux/ipq806x/image/Makefile
@ -251,6 +251,22 @@ define Device/VR2600v
 	IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
 endef

+define Device/AP-DK01.1-C1
+	PROFILES += $$(DEVICE_NAME)
+	DEVICE_TITLE := QCA AP-DK01.1-C1
+	BOARD_NAME := ap-dk01.1-c1
+	DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
+	KERNEL_LOADADDR := 0x80208000
+	KERNEL_INSTALL := 1
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 26624k
+	FILESYSTEMS := squashfs
+	$(call Device/FitImage)
+	IMAGES := sysupgrade.bin
+	IMAGE/sysupgrade.bin := append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata
+	DEVICE_PACKAGES := ath10k-firmware-qca4019
+endef
+
 define Device/AP-DK04.1-C1
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
@ -265,6 +281,6 @@ define Device/AP-DK04.1-C1
 endef

 TARGET_DEVICES += AP148 AP148-legacy C2600 D7800 DB149 EA8500 FRITZ4040 R7500 \
-		  R7500v2 R7800 NBG6817 VR2600v AP-DK04.1-C1
+		  R7500v2 R7800 NBG6817 VR2600v AP-DK01.1-C1 AP-DK04.1-C1

 $(eval $(call BuildImage))
--- a/target/linux/ipq806x/patches-4.9/864-07-dts-ipq4019-ap-dk01.1-c1-add-spi-and-ram-nodes.patch
+++ b/target/linux/ipq806x/patches-4.9/864-07-dts-ipq4019-ap-dk01.1-c1-add-spi-and-ram-nodes.patch
@ -0,0 +1,115 @@
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+@@ -19,4 +19,112 @@
+ / {
+ 	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
+ 
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges;
+
+		apps_bl@87000000 {
+			reg = <0x87000000 0x400000>;
+			no-map;
+		};
+
+		sbl@87400000 {
+			reg = <0x87400000 0x100000>;
+			no-map;
+		};
+
+		cnss_debug@87500000 {
+			reg = <0x87500000 0x600000>;
+			no-map;
+		};
+
+		cpu_context_dump@87b00000 {
+			reg = <0x87b00000 0x080000>;
+			no-map;
+		};
+
+		tz_apps@87b80000 {
+			reg = <0x87b80000 0x280000>;
+			no-map;
+		};
+
+		smem@87e00000 {
+			reg = <0x87e00000 0x080000>;
+			no-map;
+		};
+
+		tz@87e80000 {
+			reg = <0x87e80000 0x180000>;
+			no-map;
+		};
+	};
+};
+
+&spi_0 {
+	mx25l25635f@0 {
+		compatible = "mx25l25635f", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+
+		SBL1@0 {
+			label = "SBL1";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+		MIBIB@40000 {
+			label = "MIBIB";
+			reg = <0x40000 0x20000>;
+			read-only;
+		};
+		QSEE@60000 {
+			label = "QSEE";
+			reg = <0x60000 0x60000>;
+			read-only;
+		};
+		CDT@c0000 {
+			label = "CDT";
+			reg = <0xc0000 0x10000>;
+			read-only;
+		};
+		DDRPARAMS@d0000 {
+			label = "DDRPARAMS";
+			reg = <0xd0000 0x10000>;
+			read-only;
+		};
+		APPSBLENV@e0000 {
+			label = "APPSBLENV";
+			reg = <0xe0000 0x10000>;
+			read-only;
+		};
+		APPSBL@f0000 {
+			label = "APPSBL";
+			reg = <0xf0000 0x80000>;
+			read-only;
+		};
+		ART@170000 {
+			label = "ART";
+			reg = <0x170000 0x10000>;
+			read-only;
+		};
+		kernel@180000 {
+			label = "kernel";
+			reg = <0x180000 0x400000>;
+		};
+		rootfs@580000 {
+			label = "rootfs";
+			reg = <0x580000 0x1600000>;
+		};
+		firmware@180000 {
+			label = "firmware";
+			reg = <0x180000 0x1a00000>;
+		};
+	};
+ };
--- a/target/linux/ipq806x/patches-4.9/864-08-dts-ipq4019-ap-dk01.1-c1-add-compatible-string.patch
+++ b/target/linux/ipq806x/patches-4.9/864-08-dts-ipq4019-ap-dk01.1-c1-add-compatible-string.patch
@ -0,0 +1,10 @@
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+@@ -18,6 +18,7 @@
+ 
+ / {
+ 	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
+	compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1", "qcom,ipq4019";
+ 
+ 	memory {
+ 		device_type = "memory";