The general practice is to use the general SoC compatible string in both the
DTS and the board specific .c file.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34393
* The device should get a unique name at the beginning and not wl%d.
* load the nvram just one time into the own buffer, also when there is
more than one device.
SVN-Revision: 34381
Write "delay" and "message" options to their respective files,
allowing Morse code message configuration through UCI.
The delay (dit length) defaults to 150ms (about 8 words per minute,
suitable for beginners).
Signed-off-by: Petr Viktorin <encukou@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34380
The Kconfig identifier to enable debugging in the driver was different from the
actually used one. Fix that.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34332
Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and
Makefile changes to build images for this target. However, without the userspace
bits a ramips machine can't use wifi as the necessary "eeprom" data is to be
extracted by a hotplug script; also, sysupgrade support and default led
configuration are missing.
An IRC user reported these changes allowed him to use wifi on his hardware.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34331
The ASUS WL-520gU and some other similar Asus devices have a BCM5354
running at 200MHZ and not at 240 which is the default for this SoC.
This fixes#4083.
SVN-Revision: 34325
In the old configuration the SoC issued a reboot if the watchdog was
killed also if it was kill with TERM and not KILL.
This will fix#11724.
SVN-Revision: 34324
This patch adds support for defining rt2x00 eeprom data.
This eeprom data can be extracted from flash or loaded directly from a firmware file.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34322
Some boards need specifying LED pin in order to get it working.
For example, in board HW556 (Huawei HG556a) "led_pin" must be "2".
By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1".
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34321
* Accept transfers without bits_per_word set.
* Work around the inability of the hardware of keeping CS asserted.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 34320
Also override the pll_1000 value. Without these settings
ethernet suffers from packet loss.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34316
Musl is an alternative C-library, see http://www.musl-libc.org for more infos.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34314
Busybox built against musl-libc will choke on these otherwise, besides that
it is more natural to use the filesystem type, then options, then name, then
mountpoint.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34308
Not all libcs have support for tm_gmtoff which is only available for BSD
compatibility, and guarded with __USE_BSD defines, use __tm_gmtoff otherwise.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34307
Don't hide crypo submodules unless crypo-core is selected.
Fixes kmods depending on crypto modules being unselectable
until crypto core is selected (like ext4 on 3.6 or mac80211).
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 34298
The ar8216_mib_{capture,flush} functions are similar.
Move the common code into a helper and use that from
the original functions.
This change also fixes a lockdep warning in
ar8216_mib_flush.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34297
There are no good reasons for keeping this version around when 4.7.2 and
4.7-linaro are there.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34296
libthread_db.so.$(LIBC_SO_VERSION) is only valid for uClibc, (e)glibc just
provides libthread_db.so.1.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34292
swconfig does not compile with 3.7 because
struct netlink_notify->pid has been renamed to
struct netlink_notify->portid
and
struct genl_info->snd_pid has been renamed to
struct genl_info->snd_portid
Use the new names and add compatibility patches
to 3.3 and 3.6.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34288
Florian Fainelli