Gabor Juhos
f27548448b
ar71xx: fix USB LED on the DB120 board
...
SVN-Revision: 29126
13 years ago
Gabor Juhos
6ebbb1329d
ar71xx: add a function for selecting output signal on a given GPIO pin
...
SVN-Revision: 29125
13 years ago
Gabor Juhos
0c1d3617d7
ar71xx: fix GPIO function handling on AR934x
...
SVN-Revision: 29124
13 years ago
Gabor Juhos
aa0c8c4885
ar71xx: add AR71XX_ prefix to GPIO_REG_* defines
...
SVN-Revision: 29123
13 years ago
Gabor Juhos
62a7795afd
ar71xx: merge nand scan patch
...
SVN-Revision: 29122
13 years ago
Gabor Juhos
12dae96097
ar71xx: fix a compiler warning
...
SVN-Revision: 29110
13 years ago
Gabor Juhos
5ae0fd802c
ar71xx: fix GPIO count for AR934x
...
SVN-Revision: 29109
13 years ago
Gabor Juhos
e52269364a
ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X
...
SVN-Revision: 29108
13 years ago
Gabor Juhos
3104d70552
ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling
...
SVN-Revision: 29107
13 years ago
Gabor Juhos
42e8ae09b5
ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines
...
SVN-Revision: 29106
13 years ago
Gabor Juhos
c15caea360
ar71xx: add an irq parameter for ar724x_pcibios_init
...
SVN-Revision: 29105
13 years ago
Gabor Juhos
cf90b24bb9
ar71xx: remove hardwired interface parameters from mach-* files
...
SVN-Revision: 29103
13 years ago
Gabor Juhos
defc79cb40
ar71xx: force hardwired interface parameters in ar71xx_add_device_eth
...
SVN-Revision: 29102
13 years ago
Gabor Juhos
6f4bc1ce37
ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth
...
SVN-Revision: 29101
13 years ago
Gabor Juhos
368bbc510b
ar71xx: enable has_gbit flag on AR724{0,1}
...
SVN-Revision: 29026
13 years ago
Gabor Juhos
15d7016c9f
ar71xx: fixup onboard PCIe chip registration on the DB120 board
...
SVN-Revision: 29022
13 years ago
Gabor Juhos
f623066e60
ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed
...
SVN-Revision: 29021
13 years ago
Gabor Juhos
d2316b2a45
ar71xx: ag71xx: add support for getting switch port link status
...
SVN-Revision: 29017
13 years ago
Gabor Juhos
d0db89133c
ar71xx: remove mii_ctrl resources of the ethernet devices
...
SVN-Revision: 29016
13 years ago
Gabor Juhos
34015ed6e8
ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx
...
SVN-Revision: 29015
13 years ago
Gabor Juhos
2d882cff23
ar71xx: ag71xx: remove unused mii_cfg related functions and defines
...
SVN-Revision: 29014
13 years ago
Gabor Juhos
538a9493b9
ar71xx: set MII interface speed from the set_speed callbacks
...
SVN-Revision: 29013
13 years ago
Gabor Juhos
93cd46be13
ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data
...
Also rename the corresponding callback functions.
SVN-Revision: 29012
13 years ago
Gabor Juhos
9579bb4267
ar71xx: ag71xx: remove MII interface setup code
...
SVN-Revision: 29011
13 years ago
Gabor Juhos
da64ce8603
ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode
...
SVN-Revision: 29010
13 years ago
Gabor Juhos
0112153a0e
ar71xx: fix occasional kernel hangs during boot on AR934x
...
The patch taken from the linux-mips mailing list.
The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.
This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.
SVN-Revision: 29009
13 years ago
Gabor Juhos
1afc76ea13
ar71xx: refresh kernel patches
...
SVN-Revision: 29008
13 years ago
Gabor Juhos
5ad763075e
ar71xx: use the button for WPS control on the DB120
...
SVN-Revision: 28990
13 years ago
Gabor Juhos
4555be2bec
ar71xx: register the second ethernet interface on the DB120 board
...
SVN-Revision: 28989
13 years ago
Gabor Juhos
368c6605a0
ar71xx: implement SoC specific phy interface setup
...
SVN-Revision: 28988
13 years ago
Gabor Juhos
21d317b9cc
ar71xx: move phy interface setup into a separate function
...
SVN-Revision: 28987
13 years ago
Gabor Juhos
aff0c84ffa
ar71xx: register both MDIO bus on the DB120 board
...
SVN-Revision: 28986
13 years ago
Gabor Juhos
b144249108
ar71xx: add AR934X specific MDIO registration code
...
SVN-Revision: 28985
13 years ago
Gabor Juhos
f835106c8c
ar71xx: add a secondary mdio bus
...
SVN-Revision: 28984
13 years ago
Gabor Juhos
90a42da270
ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_*
...
SVN-Revision: 28983
13 years ago
Gabor Juhos
9daa2149fd
ar71xx: add an id argument to ar71xx_add_device_mdio
...
SVN-Revision: 28982
13 years ago
Gabor Juhos
b07b687aec
ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa
...
SVN-Revision: 28981
13 years ago
Gabor Juhos
a9216bb76e
ar71xx: add AR934x specific USB setup
...
SVN-Revision: 28980
13 years ago
Gabor Juhos
346e44105a
ar71xx: register the first ethernet interface on the DB120 board
...
SVN-Revision: 28979
13 years ago
Gabor Juhos
b1ba5e2f3d
ar71xx: allow to register ethernet interfaces for AR934X
...
SVN-Revision: 28978
13 years ago
Gabor Juhos
2f9e535e89
ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered
...
SVN-Revision: 28977
13 years ago
Gabor Juhos
e962b07c8b
ar71xx: add AR934X specific bootstrap and reset register bits
...
SVN-Revision: 28976
13 years ago
Gabor Juhos
d461fdd519
ar71xx: add diag support for the DB120 board
...
SVN-Revision: 28975
13 years ago
Gabor Juhos
d8db8e94c8
ar71xx: fix GPIO direction setup for AR934x
...
SVN-Revision: 28974
13 years ago
Gabor Juhos
43e993e5f5
ar71xx: fix AR934X clock frequency calculation
...
SVN-Revision: 28973
13 years ago
Gabor Juhos
8687fc3e41
ar71xx: generate ubootenv from uci-defaults instead of providing defconfig
...
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 28971
13 years ago
Felix Fietkau
7a2efd8c28
ar71xx: remove dead code
...
SVN-Revision: 28851
13 years ago
Felix Fietkau
94309039b7
ar71xx: on ar7240, exclude ports from their own port vlan destination mask
...
SVN-Revision: 28850
13 years ago
Gabor Juhos
87704b8078
ar71xx: create TL-WA901ND network config from uci-defaults
...
SVN-Revision: 28833
13 years ago
Gabor Juhos
09fdfa444f
ar71xx: create ALL0258N network config from uci-defaults
...
SVN-Revision: 28832
13 years ago