7ef37c8e3e
brcm63xx: add linux 3.10 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37481
11 years ago
66f8f30f47
bcm63xx: update patches
...
Update patches with their upstream versions.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37098
12 years ago
28535aad38
brcm63xx: refresh 3.9 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36958
12 years ago
0a62b7c148
bcm63xx: add 3.9 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36660
12 years ago
8506964e6d
bcm63xx: add support for linux 3.8
...
Based on 3.8-rc6
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35482
12 years ago
3b4fced67d
bcm63xx: add support for linux 3.7
...
Based on 3.7.6.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35481
12 years ago
a15e1a950d
bcm63xx: refresh 3.6 patches
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35477
12 years ago
60e0e0d6e6
bcm63xx: Add a fixup for rt2x00 devices.
...
This patch adds support for defining rt2x00 eeprom data.
This eeprom data can be extracted from flash or loaded directly from a firmware file.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34322
12 years ago
8d69af7c9f
add preliminary support for 3.6 kernel
...
SVN-Revision: 33936
12 years ago
9b91c62917
nb4: fix support, add support for SVC and CLIP BTN
...
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
SVN-Revision: 33156
12 years ago
c69a2cdfbb
fix leds naming for all bcm63xx boards
...
SVN-Revision: 32086
13 years ago
9a61b249c5
fix board patches so that new boards are withing appropriate ifdef
...
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this
SVN-Revision: 32060
13 years ago
e34018cc9e
bcm63xx: add support for the HSSPI controller
...
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.
SVN-Revision: 31879
13 years ago
7dbb132c88
bcm63xx: add flash type detection
...
SVN-Revision: 31877
13 years ago
5d9b44d110
use a define for the poll and debounce interval
...
SVN-Revision: 31550
13 years ago
e047cf1899
switch to gpio-keys-polled
...
SVN-Revision: 31491
13 years ago
44d546290a
bcm63xx: reorder patches
...
Reorder patches for a clearer distinction between the purposes of
the different patches.
SVN-Revision: 31127
13 years ago
07486c4d96
remove udc patch since it is unused
...
SVN-Revision: 30920
13 years ago
778e5d4fa5
brcm63xx: add support for linux 3.3
...
SVN-Revision: 30027
13 years ago
3883e71097
brcm63xx: add support for linux 3.2
...
SVN-Revision: 29731
13 years ago
034b7f0ef5
Remove invalid LED GPIO from GW6200 board definition. GPIO 35 isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics.
...
SVN-Revision: 29712
13 years ago
6b5f483efa
bcm63xx: add support for linux 3.1-rc1
...
SVN-Revision: 27941
13 years ago
016e8dee34
bcm63xx: Add support for 2.6.39
...
Add support for Kernel 2.6.39. Boots fine on a BCM6358.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27019
14 years ago
762885081a
renumber patches accordingly
...
SVN-Revision: 27013
14 years ago
031ea08ef0
refresh patches
...
SVN-Revision: 26957
14 years ago
94a22b91fc
add support for 2.6.37, patches from KanjiMonster
...
SVN-Revision: 25629
14 years ago
8f9b14dafe
boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds.
...
SVN-Revision: 24305
14 years ago
Jonas Gorski