Jonas Gorski
b8ed6534ca
brcm63xx: fix RG100A/DB120 usb port number
...
Set usbh ports to 2 to fix #15007 .
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39681
11 years ago
Jonas Gorski
66ec204935
brcm63xx: set usb host port number for some devices
...
Update a few devices with their actual port numbers, especially those
with two ports.
Should allow properly using the second port on the Neufboxen and HW553
and HW556.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39325
11 years ago
Florian Fainelli
0650ce9ec4
brcm63xx: do not add twice the same field to board
...
Changeset r39302 updated a board section and added twice .has_ehci0,
this is not necessary, so fix it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39304
11 years ago
Florian Fainelli
bf4f1feb7a
brcm63xx: add USB support to BCM6318
...
BCM6318 has a special initialization sequence which involves touching
PLL control registers in the USBH_PRIV register space, as well as
toggling a bit the Simulation control register.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39302
11 years ago
Jonas Gorski
7ef37c8e3e
brcm63xx: add linux 3.10 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37481
11 years ago
Jonas Gorski
66f8f30f47
bcm63xx: update patches
...
Update patches with their upstream versions.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37098
12 years ago
Florian Fainelli
28535aad38
brcm63xx: refresh 3.9 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36958
12 years ago
Jonas Gorski
0a62b7c148
bcm63xx: add 3.9 support
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36660
12 years ago
Jonas Gorski
8506964e6d
bcm63xx: add support for linux 3.8
...
Based on 3.8-rc6
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35482
12 years ago
Jonas Gorski
3b4fced67d
bcm63xx: add support for linux 3.7
...
Based on 3.7.6.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35481
12 years ago
Jonas Gorski
a15e1a950d
bcm63xx: refresh 3.6 patches
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35477
12 years ago
Jonas Gorski
60e0e0d6e6
bcm63xx: Add a fixup for rt2x00 devices.
...
This patch adds support for defining rt2x00 eeprom data.
This eeprom data can be extracted from flash or loaded directly from a firmware file.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34322
12 years ago
Florian Fainelli
8d69af7c9f
add preliminary support for 3.6 kernel
...
SVN-Revision: 33936
12 years ago
Florian Fainelli
9b91c62917
nb4: fix support, add support for SVC and CLIP BTN
...
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
SVN-Revision: 33156
12 years ago
Florian Fainelli
c69a2cdfbb
fix leds naming for all bcm63xx boards
...
SVN-Revision: 32086
13 years ago
Florian Fainelli
9a61b249c5
fix board patches so that new boards are withing appropriate ifdef
...
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this
SVN-Revision: 32060
13 years ago
Jonas Gorski
e34018cc9e
bcm63xx: add support for the HSSPI controller
...
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.
SVN-Revision: 31879
13 years ago
Jonas Gorski
7dbb132c88
bcm63xx: add flash type detection
...
SVN-Revision: 31877
13 years ago
Florian Fainelli
5d9b44d110
use a define for the poll and debounce interval
...
SVN-Revision: 31550
13 years ago
Florian Fainelli
e047cf1899
switch to gpio-keys-polled
...
SVN-Revision: 31491
13 years ago
Jonas Gorski
44d546290a
bcm63xx: reorder patches
...
Reorder patches for a clearer distinction between the purposes of
the different patches.
SVN-Revision: 31127
13 years ago
Florian Fainelli
07486c4d96
remove udc patch since it is unused
...
SVN-Revision: 30920
13 years ago
Jonas Gorski
778e5d4fa5
brcm63xx: add support for linux 3.3
...
SVN-Revision: 30027
13 years ago
Jonas Gorski
3883e71097
brcm63xx: add support for linux 3.2
...
SVN-Revision: 29731
13 years ago
Florian Fainelli
426dccd019
bcm63xx: Add support for Linux 3.0-rc3
...
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27192
14 years ago
Florian Fainelli
68cb138154
fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch
...
SVN-Revision: 27014
14 years ago
Florian Fainelli
762885081a
renumber patches accordingly
...
SVN-Revision: 27013
14 years ago
Florian Fainelli
94a22b91fc
add support for 2.6.37, patches from KanjiMonster
...
SVN-Revision: 25629
14 years ago
Daniel Dickinson
e5ca4d81f4
Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.
...
SVN-Revision: 24302
14 years ago
Daniel Dickinson
244db5ac6a
board definition: Fixed CPVA642 LED definitions
...
SVN-Revision: 24275
14 years ago
Daniel Dickinson
8316194016
board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz
...
SVN-Revision: 24274
14 years ago
Daniel Dickinson
314bce63e6
bcm63xx: Add support for the T-Com Speedport W 500V.
...
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24190
14 years ago