42e8ae09b5
ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines
...
SVN-Revision: 29106
13 years ago
c15caea360
ar71xx: add an irq parameter for ar724x_pcibios_init
...
SVN-Revision: 29105
13 years ago
cf90b24bb9
ar71xx: remove hardwired interface parameters from mach-* files
...
SVN-Revision: 29103
13 years ago
defc79cb40
ar71xx: force hardwired interface parameters in ar71xx_add_device_eth
...
SVN-Revision: 29102
13 years ago
6f4bc1ce37
ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth
...
SVN-Revision: 29101
13 years ago
7f787707de
build images for Pirelli A226M ( #10409 )
...
SVN-Revision: 29045
13 years ago
5dc2098448
register uart0 on DWV-S0 boards ( #10409 )
...
SVN-Revision: 29044
13 years ago
56a96ba876
refresh 3.0 patches
...
SVN-Revision: 29043
13 years ago
54da5cf11f
refresh 2.6.39 patches
...
SVN-Revision: 29042
13 years ago
717a4391d7
rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch
...
SVN-Revision: 29041
13 years ago
c093c9df34
fix typo, load ip17xx switch module
...
SVN-Revision: 29039
13 years ago
368bbc510b
ar71xx: enable has_gbit flag on AR724{0,1}
...
SVN-Revision: 29026
13 years ago
15d7016c9f
ar71xx: fixup onboard PCIe chip registration on the DB120 board
...
SVN-Revision: 29022
13 years ago
f623066e60
ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed
...
SVN-Revision: 29021
13 years ago
f4f326699b
madwifi: rename patch from ifxmips -> lantiq
...
SVN-Revision: 29020
13 years ago
0096aa78b2
uboot-lantiq: not all configs were using lzma for compression, add gigaset ramboot image
...
Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
SVN-Revision: 29019
13 years ago
14482ced5e
include/kernel.mk: don't check for modules.builtin on 2.6.32-
...
modules.builtin is only available in 2.6.33 and later, so fall back to
assuming it's built-in for older kernels.
SVN-Revision: 29018
13 years ago
d2316b2a45
ar71xx: ag71xx: add support for getting switch port link status
...
SVN-Revision: 29017
13 years ago
d0db89133c
ar71xx: remove mii_ctrl resources of the ethernet devices
...
SVN-Revision: 29016
13 years ago
34015ed6e8
ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx
...
SVN-Revision: 29015
13 years ago
2d882cff23
ar71xx: ag71xx: remove unused mii_cfg related functions and defines
...
SVN-Revision: 29014
13 years ago
538a9493b9
ar71xx: set MII interface speed from the set_speed callbacks
...
SVN-Revision: 29013
13 years ago
93cd46be13
ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data
...
Also rename the corresponding callback functions.
SVN-Revision: 29012
13 years ago
9579bb4267
ar71xx: ag71xx: remove MII interface setup code
...
SVN-Revision: 29011
13 years ago
da64ce8603
ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode
...
SVN-Revision: 29010
13 years ago
0112153a0e
ar71xx: fix occasional kernel hangs during boot on AR934x
...
The patch taken from the linux-mips mailing list.
The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.
This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.
SVN-Revision: 29009
13 years ago
1afc76ea13
ar71xx: refresh kernel patches
...
SVN-Revision: 29008
13 years ago
d8acb75009
linux: update 3.1 to 3.1.1
...
SVN-Revision: 29007
13 years ago
a8797d0de6
lantiq: add uci-defaults code for handling leds
...
SVN-Revision: 29004
13 years ago
832e02cd77
lantiq: add /lib/lantiq.sh and make hotplug handlers use it
...
SVN-Revision: 29003
13 years ago
5dcbbf0160
lantiq: rename leds
...
SVN-Revision: 29002
13 years ago
d84b7596d9
lantiq: split compat headers out of bsp header patch
...
SVN-Revision: 29001
13 years ago
2cff80f015
lantiq: adds hotplug handler for loading rt2x00 firmware
...
SVN-Revision: 29000
13 years ago
3660c51c40
lantiq: adds hotplug handler for handling buttons and makes w303v work with it
...
SVN-Revision: 28999
13 years ago
4248705108
lantiq: cleanup default package selection
...
SVN-Revision: 28998
13 years ago
eb20ab87e6
lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it
...
SVN-Revision: 28994
13 years ago
bbfaaeffd6
kernel: ar8216: add support for the AR8236 switch
...
SVN-Revision: 28993
13 years ago
ecb3690d0a
kernel: ar8216: move port vlan setup into a separate function
...
SVN-Revision: 28992
13 years ago
b49aed1520
package/base-files: enhance service functions
...
* allow matching process by name (useful for processes changing it)
* check if first argument is executable
* fix function name used in error messages
SVN-Revision: 28991
13 years ago
5ad763075e
ar71xx: use the button for WPS control on the DB120
...
SVN-Revision: 28990
13 years ago
4555be2bec
ar71xx: register the second ethernet interface on the DB120 board
...
SVN-Revision: 28989
13 years ago
368c6605a0
ar71xx: implement SoC specific phy interface setup
...
SVN-Revision: 28988
13 years ago
21d317b9cc
ar71xx: move phy interface setup into a separate function
...
SVN-Revision: 28987
13 years ago
aff0c84ffa
ar71xx: register both MDIO bus on the DB120 board
...
SVN-Revision: 28986
13 years ago
b144249108
ar71xx: add AR934X specific MDIO registration code
...
SVN-Revision: 28985
13 years ago
f835106c8c
ar71xx: add a secondary mdio bus
...
SVN-Revision: 28984
13 years ago
90a42da270
ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_*
...
SVN-Revision: 28983
13 years ago
9daa2149fd
ar71xx: add an id argument to ar71xx_add_device_mdio
...
SVN-Revision: 28982
13 years ago
b07b687aec
ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa
...
SVN-Revision: 28981
13 years ago
a9216bb76e
ar71xx: add AR934x specific USB setup
...
SVN-Revision: 28980
13 years ago
Gabor Juhos