15721d535b
firmware-utils: add a tool TP-Link v2 image generation
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37726
11 years ago
1af56d7c46
firmware-utils: remove v2 support
...
we will use gabors patch instead
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37725
11 years ago
815d9334e2
firmware-utils: fix segfault introduced by v2 changes
...
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 37724
11 years ago
f835cb6cc4
ar71xx: remove duplicate dir505 entry from board detection code
...
https://dev.openwrt.org/ticket/14006
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37723
11 years ago
d13cbb04ad
lantiq: add support for tplink images to .../image/Makefile
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37722
11 years ago
5001afdc37
lantiq: make the split patch recognize the tplink header
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37721
11 years ago
7f2eaac407
lantiq: fix TDW8970.dts commandline and partition name
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37720
11 years ago
e993e0c2cf
lantiq: add tplink header id to sysupgrade and fix a comment
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37719
11 years ago
eb844ad321
firmware-utils: add support for TDW8970 to mktplinkfw
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37718
11 years ago
85cb2c4f9e
firmware-utils: add v2 header support to firmware-utils
...
only image build works. inspect and md5 checksum support are not implemented yet
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37717
11 years ago
bdb2859a48
ath9k: fold the aggregation rework into 300-pending_work.patch (tracked as upstream submission)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37716
11 years ago
5bce86faa2
mac80211: refresh a patch that was using the wrong patch style
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37715
11 years ago
48b3b74da7
mac80211: fold the rtlwifi patch into 300-pending_work.patch (upstream patch)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37714
11 years ago
592f2c6e2b
ath9k: add some more fixes for the tx queueing rework
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37713
11 years ago
27fa640548
lantiq: add (incomplete) support for Aztech GR7000
...
*) can not connect to switch chip
*) only one usb port is working
*) wifi is not working
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37712
11 years ago
3f351e2770
mac80211: rtlwifi depends on PCI or USB support in the Kconfig file
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37711
11 years ago
d1914b4939
kernel: add some missing config symbols
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37710
11 years ago
9d4145efe5
kernel: fix DMA error when BCM4331 is connected to BCM4706
...
The BCM4331 supports a PCIe max request size of 512 bytes and uses
that, but the PCIe controller in the BCM4706 just supports 128 Bytes
and that causes a DMA error for packages bigger than 126 bytes. This
fixes the problem by setting the BCM4331 also to 128 Bytes.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37709
11 years ago
9257d556c2
ramips: re-implement PCI mux
...
Parallel flash access on RT3662/RT3883 based devices
is broken without that. It was fixed already some time
ago, but that change seems lost somewhere.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37708
11 years ago
c80dd34924
ramips: allow to build Seama firmware images with arbitrary size
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37707
11 years ago
267810f73a
ar71xx: add usb modules to dir 505 profile
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37706
11 years ago
c83e665a2c
octeon: add a few missing symbols to the kernel config file
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37705
11 years ago
288adb6634
lantiq: several a803 related fixes
...
based on work from Matti Laasko that he posted in the wiki
Signed-off-by: John Crispin <blogic@openwrt.or
SVN-Revision: 37704
11 years ago
553a469728
ar71xx: add support for dir 505 a1
...
this patch is based on ...
-> https://forum.openwrt.org/viewtopic.php?pid=179902#p179902
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37703
11 years ago
6743f2625b
gpio-button-hotplug: debounce the initial button state, the first reads at boot time might be wrong
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37702
11 years ago
158cc23d39
ubus: fix typo
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37701
11 years ago
e7de3b26ed
ubus: change section/category to base, libs
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37700
11 years ago
259c36358f
mac80211: fix rt2x00 dependency
...
The current dependency prevents building of the
rt2800{pci,usb} drivers for RT3883. Change the
dependency to fix this.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37699
11 years ago
885cf1f19f
mac80211: rt2x00: fix LED polarity patch
...
The patch causes compiler warning ...
<...>/drivers/net/wireless/rt2x00/rt2800lib.c: In function 'rt2800_init_eeprom':
<...>/drivers/net/wireless/rt2x00/rt2800lib.c:5971:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
... and runtime errors on PCI/USB devices:
[ 11.810000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 11.830000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[ 11.880000] rt2x00mmio_regbusy_read() Indirect register access failed: offset=0x00007010, value=0x01ff0001
[ 12.080000] usb 1-1: reset high-speed USB device number 2 using ehci-platform
[ 12.250000] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detecte
[ 12.300000] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected
[ 12.350000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x1a93b47
[ 12.430000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
[ 12.480000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37698
11 years ago
3573494b19
mac80211: enable RT{33,35,53,55}XX chip support in rt2800usb
...
Closes #13951 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37697
11 years ago
99a12119ca
ar71xx: fix tl-wa901nd buttons code
...
This patch fixes the code of the buttons for TP-Link WA901ND.
Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37696
11 years ago
ccec78beaa
ar71xx: ubnt unifi outdoor register gpio button
...
This patch register the gpio buttons for the Ubiquiti UniFi Outdoor.
Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37695
11 years ago
f0b5e7d419
x86: change /dev/console to tty to fix job control
...
Job control is turned off because it cannot obtain controlling terminal on
/dev/console, so it is impossible to do any job control operation behind
real x86 device (keyboard+monitor or virtualized).
This patch switches /dev/console to tty devices for ash on x86 generic target.
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
SVN-Revision: 37693
11 years ago
c7976ae5f8
mac80211: add rtlwifi drivers
...
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
[jogo@openwrt.org: add missing DRIVER_11N_SUPPORT select, add missing
usb dependencies, backport upstream fixes for Kconfig
issues]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37687
11 years ago
f5b9555cdc
imx6: sync usb chipidea with upstream
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37686
11 years ago
db083a41cf
generic: make the module reloc pacth work on mips64
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37685
11 years ago
3a2040ffee
octeon: add support for the octeon mips64 SoC
...
This is the SoC used be the ESR Lite made by ubnt.com
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37684
11 years ago
8a4726bca8
imx6: remove sdma binary
...
SVN-Revision: 37682
11 years ago
c5b4d98d39
busybox: rename ntp init script back to sysntpd ( #13920 )
...
Renaming the init script to ntp broke LuCI time sync functionality and collides with other ntp packages
SVN-Revision: 37681
11 years ago
2fcaba306e
brcm47xx: change board detection for some Asus devices
...
This closes #13316
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37680
11 years ago
1d3067892b
build: process transitive dependencies after local dependencies
...
This improves duplicate dependency detection
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37679
11 years ago
0249f7510c
build: suppress conditional dependencies if there are unconditional dependencies on the same symbol
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37678
11 years ago
0d9ecfa564
kernel: kmod-appletalk: fix dependencies
...
When CONFIG_LLC gets build as a module, also p8022.ko and psnap.ko are
getting build as a module. kmod-appletalk depends on llc.ko and
psnap.ko, but at least psnap.ko,was not packed. On most systems
CONFIG_LLC will be build into the kernel so this problem does not show
up.
This fixes the missing dependency of kmod-appletalk on psnap.ko
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37673
11 years ago
cccc9e214b
kernel: do not build FW_LOADER as a module.
...
CONFIG_FW_LOADER=y is set in the generic config and our packages in
packages/kernel/linux are depending on it to be compiled into the
kernel.
This fixes some dependency problem where kmod-r8169 misses
firmware_class.ko.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37672
11 years ago
80f8b60607
ubus: update to latest version
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37671
11 years ago
7dea39fda2
broadcom-diag: show error message in case something goes wrong with gpio irq
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37668
11 years ago
309123bbfd
broadcom-diag: add gpio config for Asus RT-N66U
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37667
11 years ago
b1b3067a12
broadcom-diag: add gpio config for Linksys E4200v1
...
GPIO for Linksys E4200v1, tested and works. This closes #13454 and #13894
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37666
11 years ago
18e37d8caf
gpio-button-hotplug: cleanup, fix compiler warning
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37665
11 years ago
4281026dda
gpio-button-hotplug: fix active_low handling, possibly broken in r37643
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37664
11 years ago
John Crispin