Device specification: - SoC: Ralink RT3883 (MIPS 74Kc) 500Mhz - RAM: 64Mb - Flash: 8MB (SPI-NOR) - Ethernet: 10/100/1000 Mbps - WLAN Wireless 1: SoC-integrated : 2.4/5 GHz Wireless 2: 2.4 GHz RT3092L - LED: 2x USB, WAN, LAN - Key: WPS, reset - Serial: 4-pin header, (57600,8,N,1), 3.3V TTL, GND, RX, TX, V - J12 marking on board - USB ports: 2 x USB 2.0 Flashing instructions: Option 1 (from bootloader web) - Hold reset button on the back of router when plugging in power (for at-least 10 seconds after plugged in) - Connect to a Lan port - Set computer IP to 10.10.10.3 - Go to http://10.10.10.123 in a web browser - Click the Browse... Button and select the *squashfs.sysupgrade.bin file then click APPLY Option 2 (from the stock admin web) - Go to firmware upgrade - Upload the **factory** image *initramfs.bin first - Boot into openwrt - From Luci web in openwrt upload the *squashfs.sysupgrade.bin Signed-off-by: Kip Porterfield <kip.porterfield@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added v1 to the compatible identifier, added pciid for the RT3092L, fixed pci unit-address, split out the F9K110X.dtsi to prepare for a possible F9K1103 patch]master
parent
6c558bae64
commit
f2c83532f9
@ -0,0 +1,71 @@ |
|||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include "F9K110x.dtsi" |
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h> |
||||||
|
#include <dt-bindings/input/input.h> |
||||||
|
|
||||||
|
/ { |
||||||
|
compatible = "belkin,f9k1109v1", "ralink,rt3883-soc"; |
||||||
|
model = "Belkin F9K1109 Version 1.0"; |
||||||
|
|
||||||
|
aliases { |
||||||
|
led-boot = &led_status_amber; |
||||||
|
led-failsafe = &led_status_amber; |
||||||
|
led-running = &led_status_blue; |
||||||
|
led-upgrade = &led_status_amber; |
||||||
|
}; |
||||||
|
|
||||||
|
leds { |
||||||
|
compatible = "gpio-leds"; |
||||||
|
|
||||||
|
led_status_amber: internet_amber { |
||||||
|
label = "f9k1109v1:amber:internet"; |
||||||
|
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
|
||||||
|
led_status_blue: internet_blue { |
||||||
|
label = "f9k1109v1:blue:internet"; |
||||||
|
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
|
||||||
|
usb1 { |
||||||
|
label = "f9k1109v1:green:usb1"; |
||||||
|
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
|
||||||
|
usb2 { |
||||||
|
label = "f9k1109v1:green:usb2"; |
||||||
|
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
|
||||||
|
wps_amber { |
||||||
|
label = "f9k1109v1:amber:wps"; |
||||||
|
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
|
||||||
|
wps_blue { |
||||||
|
label = "f9k1109v1:blue:wps"; |
||||||
|
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
|
||||||
|
}; |
||||||
|
|
||||||
|
keys { |
||||||
|
compatible = "gpio-keys-polled"; |
||||||
|
poll-interval = <100>; |
||||||
|
|
||||||
|
reset { |
||||||
|
label = "reset"; |
||||||
|
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; |
||||||
|
linux,code = <KEY_RESTART>; |
||||||
|
}; |
||||||
|
|
||||||
|
wps { |
||||||
|
label = "wps"; |
||||||
|
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; |
||||||
|
linux,code = <KEY_WPS_BUTTON>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
@ -0,0 +1,101 @@ |
|||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||||
|
|
||||||
|
#include "rt3883.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
compatible = "ralink,rt3883-soc"; |
||||||
|
}; |
||||||
|
|
||||||
|
&gpio1 { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&spi0 { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
flash@0 { |
||||||
|
compatible = "jedec,spi-nor"; |
||||||
|
reg = <0>; |
||||||
|
spi-max-frequency = <25000000>; |
||||||
|
|
||||||
|
partitions { |
||||||
|
compatible = "fixed-partitions"; |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
|
||||||
|
partition@0 { |
||||||
|
label = "uboot"; |
||||||
|
reg = <0x0 0x30000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@30000 { |
||||||
|
label = "uboot-env"; |
||||||
|
reg = <0x30000 0x10000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
factory: partition@40000 { |
||||||
|
label = "factory"; |
||||||
|
reg = <0x40000 0x10000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@50000 { |
||||||
|
compatible = "denx,uimage"; |
||||||
|
label = "firmware"; |
||||||
|
reg = <0x50000 0x7a0000>; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@7f0000 { |
||||||
|
label = "user-cfg"; |
||||||
|
reg = <0x7f0000 0x10000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
ðernet { |
||||||
|
port@0 { |
||||||
|
mediatek,fixed-link = <1000 1 1 1>; |
||||||
|
phy-mode = "rgmii"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&pinctrl { |
||||||
|
state_default: pinctrl0 { |
||||||
|
gpio { |
||||||
|
ralink,group = "i2c", "jtag", "uartf"; |
||||||
|
ralink,function = "gpio"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&wmac { |
||||||
|
status = "okay"; |
||||||
|
ralink,mtd-eeprom = <&factory 0>; |
||||||
|
}; |
||||||
|
|
||||||
|
&pci { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&pci1 { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
wifi@1,0 { |
||||||
|
compatible = "pci1814,3091"; |
||||||
|
reg = <0x10000 0 0 0 0>; |
||||||
|
ralink,5ghz = <0>; |
||||||
|
ralink,mtd-eeprom = <&factory 0x8000>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&ehci { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&ohci { |
||||||
|
status = "okay"; |
||||||
|
}; |
Loading…
Reference in new issue