The DWR-118-A1 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 64 MB of RAM - 16 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7610EN) - 3x 10/100 Mbps Ethernet (3 LAN) - 2x 10/100/1000 Mbps ICPlus IP1001 Ethernet PHY (1 WAN AND 1 LAN) - 1x internal, non-detachable antenna - 2x external, non-detachable antennas - 1x USB 2.0 - UART (J1) header on PCB (57600 8n1) - 7x LED (5x GPIO-controlled), 2x button - JBOOT bootloader Known issues: - WIFI 5G LED not working - flash is very slow The status led has been assigned to the dwr-118-a1:green:internet led. At the end of the boot it is switched off and is available for other operation. Work correctly also during sysupgrade operation. Installation: Apply factory image via http web-gui or JBOOT recovery page How to revert to OEM firmware: - push the reset button and turn on the power. Wait until LED start blinking (~10sec.) - upload original factory image via JBOOT http (IP: 192.168.123.254) Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>master
parent
40692f0fb5
commit
e9a9b7d1ed
@ -0,0 +1,189 @@ |
|||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include "mt7620a.dtsi" |
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h> |
||||||
|
#include <dt-bindings/input/input.h> |
||||||
|
|
||||||
|
/ { |
||||||
|
compatible = "dlink,dwr-118-a1", "ralink,mt7620a-soc"; |
||||||
|
model = "D-Link DWR-118 A1"; |
||||||
|
|
||||||
|
aliases { |
||||||
|
led-boot = &led_internet; |
||||||
|
led-failsafe = &led_internet; |
||||||
|
led-upgrade = &led_internet; |
||||||
|
}; |
||||||
|
|
||||||
|
gpio-keys-polled { |
||||||
|
compatible = "gpio-keys-polled"; |
||||||
|
poll-interval = <20>; |
||||||
|
|
||||||
|
wps { |
||||||
|
label = "wps"; |
||||||
|
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; |
||||||
|
linux,code = <KEY_WPS_BUTTON>; |
||||||
|
}; |
||||||
|
|
||||||
|
reset { |
||||||
|
label = "reset"; |
||||||
|
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; |
||||||
|
linux,code = <KEY_RESTART>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
gpio-leds { |
||||||
|
compatible = "gpio-leds"; |
||||||
|
|
||||||
|
wan { |
||||||
|
label = "dwr-118-a1:green:wan"; |
||||||
|
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
|
||||||
|
led_internet: internet { |
||||||
|
label = "dwr-118-a1:green:internet"; |
||||||
|
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
|
||||||
|
lan { |
||||||
|
label = "dwr-118-a1:green:lan"; |
||||||
|
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
|
||||||
|
wlan2g { |
||||||
|
label = "dwr-118-a1:green:wlan2g"; |
||||||
|
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
|
||||||
|
usb { |
||||||
|
label = "dwr-118-a1:green:usb"; |
||||||
|
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
||||||
|
trigger-sources = <&ohci_port1>, <&ehci_port1>; |
||||||
|
linux,default-trigger = "usbport"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
gpio_export { |
||||||
|
compatible = "gpio-export"; |
||||||
|
#size-cells = <0>; |
||||||
|
|
||||||
|
usb { |
||||||
|
gpio-export,name = "usb"; |
||||||
|
gpio-export,output = <0>; |
||||||
|
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&gpio1 { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&gpio2 { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&gpio3 { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&spi0 { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
flash@0 { |
||||||
|
compatible = "jedec,spi-nor"; |
||||||
|
reg = <0>; |
||||||
|
spi-max-frequency = <80000000>; |
||||||
|
|
||||||
|
partitions { |
||||||
|
compatible = "fixed-partitions"; |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
|
||||||
|
partition@0 { |
||||||
|
label = "jboot"; |
||||||
|
reg = <0x0 0x10000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@10000 { |
||||||
|
compatible = "amit,jimage"; |
||||||
|
label = "firmware"; |
||||||
|
reg = <0x10000 0xfe0000>; |
||||||
|
}; |
||||||
|
|
||||||
|
config: partition@ff0000 { |
||||||
|
label = "config"; |
||||||
|
reg = <0xff0000 0x10000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&ehci { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&ohci { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&pinctrl { |
||||||
|
state_default: pinctrl0 { |
||||||
|
default { |
||||||
|
ralink,group = "ephy", "uartf", "spi refclk", "wled"; |
||||||
|
ralink,function = "gpio"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&pcie { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&pcie0 { |
||||||
|
wifi@0,0 { |
||||||
|
reg = <0x0000 0 0 0 0>; |
||||||
|
mtd-mac-address = <&config 0xe496>; |
||||||
|
mtd-mac-address-increment = <(2)>; |
||||||
|
mediatek,mtd-eeprom = <&config 0xe083>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
ðernet { |
||||||
|
status = "okay"; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; |
||||||
|
|
||||||
|
port@4 { |
||||||
|
status = "okay"; |
||||||
|
phy-handle = <&phy4>; |
||||||
|
phy-mode = "rgmii"; |
||||||
|
}; |
||||||
|
|
||||||
|
port@5 { |
||||||
|
status = "okay"; |
||||||
|
phy-handle = <&phy5>; |
||||||
|
phy-mode = "rgmii"; |
||||||
|
}; |
||||||
|
|
||||||
|
mdio-bus { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
phy4: ethernet-phy@4 { |
||||||
|
reg = <4>; |
||||||
|
phy-mode = "rgmii-rxid"; |
||||||
|
}; |
||||||
|
|
||||||
|
phy5: ethernet-phy@5 { |
||||||
|
reg = <5>; |
||||||
|
phy-mode = "rgmii-rxid"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&gsw { |
||||||
|
mediatek,port4 = "gmac"; |
||||||
|
}; |
Loading…
Reference in new issue