kenrel: refresh patches

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44678

target/linux/generic/patches-3.18/505-yaffs-3.16-new-fops.patch

@@ -1,6 +1,6 @@
 --- a/fs/yaffs2/yaffs_vfs.c
 +++ b/fs/yaffs2/yaffs_vfs.c
-@@ -796,13 +796,13 @@
+@@ -796,13 +796,13 @@ static int yaffs_sync_object(struct file
  static const struct file_operations yaffs_file_operations = {
  	.read = do_sync_read,
  	.write = do_sync_write,
@@ -17,7 +17,7 @@
  	.llseek = generic_file_llseek,
  };
  
-@@ -1050,7 +1050,7 @@
+@@ -1050,7 +1050,7 @@ static int yaffs_readlink(struct dentry
  	if (!alias)
  		return -ENOMEM;
  

target/linux/lantiq/patches-3.18/0001-MIPS-lantiq-add-pcie-driver.patch

@@ -41,7 +41,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/arch/mips/lantiq/Kconfig
 +++ b/arch/mips/lantiq/Kconfig
-@@ -17,6 +17,7 @@
+@@ -17,6 +17,7 @@ config SOC_XWAY
  	bool "XWAY"
  	select SOC_TYPE_XWAY
  	select HW_HAS_PCI
@@ -49,7 +49,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  config SOC_FALCON
  	bool "FALCON"
-@@ -37,6 +38,15 @@
+@@ -37,6 +38,15 @@ config PCI_LANTIQ
  	bool "PCI Support"
  	depends on SOC_XWAY && PCI
  
@@ -67,7 +67,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	depends on SOC_XWAY
 --- a/arch/mips/lantiq/xway/sysctrl.c
 +++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -377,6 +377,8 @@
+@@ -377,6 +377,8 @@ void __init ltq_soc_init(void)
  				PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
  				PMU_PPE_QSB | PMU_PPE_TOP);
  		clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY);
@@ -78,7 +78,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  				ltq_ar9_fpi_hz(), CLOCK_250M);
 --- a/arch/mips/pci/Makefile
 +++ b/arch/mips/pci/Makefile
-@@ -43,6 +43,8 @@
+@@ -43,6 +43,8 @@ obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops
  obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
  obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
  obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
@@ -188,7 +188,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  	if (ltq_pci_plat_dev_init)
  		return ltq_pci_plat_dev_init(dev);
-@@ -25,5 +26,7 @@
+@@ -25,5 +26,7 @@ int pcibios_plat_dev_init(struct pci_dev
  
  int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
  {
@@ -4161,7 +4161,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +
 --- a/arch/mips/pci/pci.c
 +++ b/arch/mips/pci/pci.c
-@@ -251,6 +251,31 @@
+@@ -251,6 +251,31 @@ static int __init pcibios_init(void)
  
  subsys_initcall(pcibios_init);
  
@@ -5503,7 +5503,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +
 --- a/drivers/pci/pcie/aer/Kconfig
 +++ b/drivers/pci/pcie/aer/Kconfig
-@@ -19,6 +19,7 @@
+@@ -19,6 +19,7 @@ config PCIEAER
  config PCIE_ECRC
  	bool "PCI Express ECRC settings control"
  	depends on PCIEAER
@@ -5513,7 +5513,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	  (transaction layer end-to-end CRC checking).
 --- a/include/linux/pci.h
 +++ b/include/linux/pci.h
-@@ -1160,6 +1160,8 @@
+@@ -1160,6 +1160,8 @@ void pci_walk_bus(struct pci_bus *top, i
  		  void *userdata);
  int pci_cfg_space_size(struct pci_dev *dev);
  unsigned char pci_bus_max_busnr(struct pci_bus *bus);

target/linux/lantiq/patches-3.18/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch

@@ -22,7 +22,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  #include <linux/mtd/mtd.h>
  #include <linux/mtd/partitions.h>
-@@ -198,6 +199,10 @@
+@@ -198,6 +199,10 @@ static int m25p_probe(struct spi_device
  	enum read_mode mode = SPI_NOR_NORMAL;
  	char *flash_name = NULL;
  	int ret;
@@ -33,7 +33,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  
  	data = dev_get_platdata(&spi->dev);
  
-@@ -229,6 +234,8 @@
+@@ -229,6 +234,8 @@ static int m25p_probe(struct spi_device
  
  	if (data && data->name)
  		flash->mtd.name = data->name;

target/linux/lantiq/patches-3.18/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch

@@ -30,7 +30,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +#endif /* _PCI_ATH_FIXUP */
 --- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
 +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -90,5 +90,8 @@
+@@ -90,5 +90,8 @@ int xrx200_gphy_boot(struct device *dev,
  extern void ltq_pmu_enable(unsigned int module);
  extern void ltq_pmu_disable(unsigned int module);
  
@@ -41,7 +41,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  #endif /* _LTQ_XWAY_H__ */
 --- a/arch/mips/lantiq/xway/Makefile
 +++ b/arch/mips/lantiq/xway/Makefile
-@@ -2,4 +2,7 @@
+@@ -2,4 +2,7 @@ obj-y := prom.o sysctrl.o clk.o reset.o
  
  obj-y += vmmc.o tffs.o
  
@@ -590,7 +590,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +device_initcall(of_ralink_eeprom_init);
 --- a/drivers/net/ethernet/lantiq_etop.c
 +++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -161,7 +161,7 @@
+@@ -161,7 +161,7 @@ struct ltq_etop_priv {
  	int tx_irq;
  	int rx_irq;
  
@@ -599,7 +599,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
  	int mii_mode;
  
  	spinlock_t lock;
-@@ -840,7 +840,11 @@
+@@ -840,7 +840,11 @@ ltq_etop_init(struct net_device *dev)
  	if (err)
  		goto err_hw;
  

target/linux/lantiq/patches-3.18/0039-MIPS-lantiq-initialize-usb-on-boot.patch

@@ -38,7 +38,7 @@
  /* remapped base addr of the reset control unit */
  static void __iomem *ltq_rcu_membase;
  static struct device_node *ltq_rcu_np;
-@@ -200,6 +231,45 @@
+@@ -200,6 +231,45 @@ static void ltq_machine_power_off(void)
  	unreachable();
  }
  
@@ -84,7 +84,7 @@
  static int __init mips_reboot_setup(void)
  {
  	struct resource res;
-@@ -223,6 +293,9 @@
+@@ -223,6 +293,9 @@ static int __init mips_reboot_setup(void
  	if (!ltq_rcu_membase)
  		panic("Failed to remap core memory");
  

target/linux/lantiq/patches-3.18/0040-USB-DWC2-enable-usb-power-gpio.patch

@@ -1,5 +1,5 @@
---- a/drivers/usb/dwc2/platform.c	2015-02-06 16:53:48.000000000 +0200
-+++ b/drivers/usb/dwc2/platform.c	2015-02-09 19:22:41.974089626 +0200
+--- a/drivers/usb/dwc2/platform.c
++++ b/drivers/usb/dwc2/platform.c
 @@ -40,6 +40,7 @@
  #include <linux/device.h>
  #include <linux/dma-mapping.h>
@@ -8,7 +8,7 @@
  #include <linux/platform_device.h>
  
  #include <linux/usb/of.h>
-@@ -154,6 +155,7 @@
+@@ -154,6 +155,7 @@ static int dwc2_driver_probe(struct plat
  	struct resource *res;
  	int retval;
  	int irq;
@@ -16,7 +16,7 @@
  
  	if (usb_disabled())
  		return -ENODEV;
-@@ -173,6 +175,16 @@
+@@ -173,6 +175,16 @@ static int dwc2_driver_probe(struct plat
  		defparams.dma_desc_enable = 0;
  	}
  

target/linux/lantiq/patches-3.18/0041-USB-DWC2-add-ltq-params.patch

@@ -1,6 +1,6 @@
---- a/drivers/usb/dwc2/platform.c	2015-02-09 19:37:34.553109992 +0200
-+++ b/drivers/usb/dwc2/platform.c	2015-02-09 19:38:30.090111260 +0200
-@@ -105,6 +105,34 @@
+--- a/drivers/usb/dwc2/platform.c
++++ b/drivers/usb/dwc2/platform.c
+@@ -106,6 +106,34 @@ static const struct dwc2_core_params par
  	.uframe_sched			= -1,
  };
  
@@ -35,7 +35,7 @@
  /**
   * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
   * DWC_otg driver
-@@ -128,6 +156,7 @@
+@@ -129,6 +157,7 @@ static int dwc2_driver_remove(struct pla
  static const struct of_device_id dwc2_of_match_table[] = {
  	{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
  	{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },

target/linux/lantiq/patches-3.18/0160-owrt-lantiq-multiple-flash.patch

@@ -8,7 +8,7 @@
  #include <linux/of.h>
  
  #include <lantiq_soc.h>
-@@ -38,10 +39,12 @@
+@@ -38,10 +39,12 @@ enum {
  	LTQ_NOR_NORMAL
  };
  
@@ -24,7 +24,7 @@
  };
  
  static const char ltq_map_name[] = "ltq_nor";
-@@ -109,12 +112,44 @@
+@@ -109,12 +112,44 @@ ltq_copy_to(struct map_info *map, unsign
  }
  
  static int
@@ -70,7 +70,7 @@
  
  	if (of_machine_is_compatible("lantiq,falcon") &&
  			(ltq_boot_select() != BS_FLASH)) {
-@@ -128,76 +163,88 @@
+@@ -128,76 +163,88 @@ ltq_mtd_probe(struct platform_device *pd
  
  	platform_set_drvdata(pdev, ltq_mtd);
  

target/linux/lantiq/patches-3.18/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch

@@ -1,6 +1,6 @@
 --- a/drivers/mtd/chips/cfi_cmdset_0001.c
 +++ b/drivers/mtd/chips/cfi_cmdset_0001.c
-@@ -40,7 +40,7 @@
+@@ -39,7 +39,7 @@
  /* #define CMDSET0001_DISABLE_WRITE_SUSPEND */
  
  // debugging, turns off buffer write mode if set to 1