Previously Newifi D2 could only use PandoraBox M1's firmware. It works fine, but LED GPIO is different. As a result, a separated DTS file for this device should be implemented. Hardware spec: * CPU: MTK MT7621A * RAM: 512MB * ROM: 32MB SPI Flash * WiFi: MTK MT7603+MT7612 * Button: 2 buttons (reset, wps) * LED: 3 single-color LEDs (USB, WiFi 2.4GHz, WiFi 5GHz) & 2 dual-color LEDs (Power, Internet) * Ethernet: 5 ports, 4 LAN + 1 WAN Installation method: Same as Newifi D1, users may need to request unlock code from the device manufacturer. Otherwise, a SPI flash programmer may be necessary to get the firmware flashed. After the device is unlocked, press and hold reset button before power cable plugs in. Then go to http://192.168.1.1 to upload and flash the firmware package. Signed-off-by: Jackson Ming Hu <huming2207@gmail.com>master
parent
fe6f298b07
commit
c0e131b436
@ -0,0 +1,159 @@ |
||||
/dts-v1/; |
||||
|
||||
#include "mt7621.dtsi" |
||||
|
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
/ { |
||||
compatible = "d-team,newifi-d2", "mediatek,mt7621-soc"; |
||||
model = "Newifi-D2"; |
||||
|
||||
memory@0 { |
||||
device_type = "memory"; |
||||
reg = <0x0 0x1c000000>, <0x20000000 0x4000000>; |
||||
}; |
||||
|
||||
chosen { |
||||
bootargs = "console=ttyS0,115200"; |
||||
}; |
||||
|
||||
gpio-leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
power-amber { |
||||
label = "newifi-d2:amber:power"; |
||||
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
power-blue { |
||||
label = "newifi-d2:blue:power"; |
||||
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
internet-amber { |
||||
label = "newifi-d2:amber:internet"; |
||||
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
internet-blue { |
||||
label = "newifi-d2:blue:internet"; |
||||
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
wlan2g { |
||||
label = "newifi-d2:blue:wlan2g"; |
||||
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
wlan5g { |
||||
label = "newifi-d2:blue:wlan5g"; |
||||
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
usb { |
||||
label = "newifi-d2:blue:usb"; |
||||
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
|
||||
gpio-keys-polled { |
||||
compatible = "gpio-keys-polled"; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
poll-interval = <20>; |
||||
|
||||
reset { |
||||
label = "reset"; |
||||
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; |
||||
linux,code = <KEY_RESTART>; |
||||
}; |
||||
|
||||
wps { |
||||
label = "wps"; |
||||
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; |
||||
linux,code = <KEY_WPS_BUTTON>; |
||||
}; |
||||
}; |
||||
|
||||
gpio_export { |
||||
compatible = "gpio-export"; |
||||
#size-cells = <0>; |
||||
|
||||
power_usb3 { |
||||
gpio-export,name = "power_usb3"; |
||||
gpio-export,output = <1>; |
||||
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&spi0 { |
||||
status = "okay"; |
||||
|
||||
m25p80@0 { |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
compatible = "jedec,spi-nor"; |
||||
reg = <0>; |
||||
spi-max-frequency = <10000000>; |
||||
m25p,chunked-io = <32>; |
||||
|
||||
partition@0 { |
||||
label = "u-boot"; |
||||
reg = <0x0 0x30000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@30000 { |
||||
label = "u-boot-env"; |
||||
reg = <0x30000 0x10000>; |
||||
read-only; |
||||
}; |
||||
|
||||
factory: partition@40000 { |
||||
label = "factory"; |
||||
reg = <0x40000 0x10000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@50000 { |
||||
label = "firmware"; |
||||
reg = <0x50000 0x1fb0000>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pcie { |
||||
status = "okay"; |
||||
|
||||
pcie0 { |
||||
mt76@0,0 { |
||||
reg = <0x0000 0 0 0 0>; |
||||
device_type = "pci"; |
||||
mediatek,mtd-eeprom = <&factory 0x8000>; |
||||
ieee80211-freq-limit = <5000000 6000000>; |
||||
}; |
||||
}; |
||||
|
||||
pcie1 { |
||||
mt76@1,0 { |
||||
reg = <0x0000 0 0 0 0>; |
||||
device_type = "pci"; |
||||
mediatek,mtd-eeprom = <&factory 0x0000>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
ðernet { |
||||
mtd-mac-address = <&factory 0xe000>; |
||||
}; |
||||
|
||||
&pinctrl { |
||||
state_default: pinctrl0 { |
||||
gpio { |
||||
ralink,group = "i2c", "jtag", "uart2", "uart3"; |
||||
ralink,function = "gpio"; |
||||
}; |
||||
}; |
||||
}; |
Loading…
Reference in new issue