hsist
/
freifunkist-firmware
6
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

restore right patches for 2.6.21.5

Browse Source 
SVN-Revision: 7800
master
Gabor Juhos 18 years ago
parent 5074eb5ac7
commit b2f25e0fcb
12 changed files with 563 additions and 0 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 111
      target/linux/adm5120-2.6/patches/001-adm5120.patch
  2. 27
      target/linux/adm5120-2.6/patches/002-adm5120_flash.patch
  3. 27
      target/linux/adm5120-2.6/patches/003-adm5120_switch.patch
  4. 53
      target/linux/adm5120-2.6/patches/004-adm5120_uart.patch
  5. 58
      target/linux/adm5120-2.6/patches/005-adm5120_usb.patch
  6. 45
      target/linux/adm5120-2.6/patches/006-adm5120_leds.patch
  7. 23
      target/linux/adm5120-2.6/patches/007-adm5120_pci.patch
  8. 38
      target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch
  9. 39
      target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch
  10. 87
      target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch
  11. 26
      target/linux/adm5120-2.6/patches/140-cmdline_hack.patch
  12. 29
      target/linux/adm5120-2.6/patches/500-Nand.patch

111
target/linux/adm5120-2.6/patches/001-adm5120.patch
Unescape View File

@ -0,0 +1,111 @@
Index: linux-2.6.21.1/arch/mips/Kconfig
===================================================================
--- linux-2.6.21.1.orig/arch/mips/Kconfig
+++ linux-2.6.21.1/arch/mips/Kconfig
@@ -16,6 +16,17 @@ choice
prompt "System type"
default SGI_IP22
+config MIPS_ADM5120
+ bool "Support for ADM5120 SoC"
+ select SYS_HAS_CPU_MIPS32_R1
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select GENERIC_GPIO
+
config MIPS_MTX1
bool "4G Systems MTX-1 board"
select DMA_NONCOHERENT
@@ -766,6 +775,7 @@
endchoice
+source "arch/mips/adm5120/Kconfig"
source "arch/mips/ddb5xxx/Kconfig"
source "arch/mips/gt64120/ev64120/Kconfig"
source "arch/mips/jazz/Kconfig"
Index: linux-2.6.21.1/arch/mips/Makefile
===================================================================
--- linux-2.6.21.1.orig/arch/mips/Makefile
+++ linux-2.6.21.1/arch/mips/Makefile
@@ -165,6 +165,14 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/
load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
#
+# ADMtek 5120
+#
+
+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/
+cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120
+load-$(CONFIG_MIPS_ADM5120) += 0xffffffff80001000
+
+#
# Common Alchemy Au1x00 stuff
#
core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/
Index: linux-2.6.21.1/include/asm-mips/bootinfo.h
===================================================================
--- linux-2.6.21.1.orig/include/asm-mips/bootinfo.h
+++ linux-2.6.21.1/include/asm-mips/bootinfo.h
@@ -213,6 +213,57 @@
#define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */
#define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
+/*
+ * Valid machtype for group ADMtek ADM5120
+ */
+#define MACH_GROUP_ADM5120 23
+#define MACH_ADM5120_UNKNOWN 0 /* Unknown board */
+#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */
+#define MACH_ADM5120_WP54G 2 /* Compex WP54G */
+#define MACH_ADM5120_WP54AG 3 /* Compex WP54AG */
+#define MACH_ADM5120_WPP54G 4 /* Compex WPP54G */
+#define MACH_ADM5120_WPP54AG 5 /* Compex WPP54AG */
+#define MACH_ADM5120_NP28G 6 /* Compex NP28G */
+#define MACH_ADM5120_NP28GHS 7 /* Compex NP28G HotSpot */
+#define MACH_ADM5120_NP27G 8 /* Compex NP27G */
+#define MACH_ADM5120_WP54Gv1C 9 /* Compex WP54G version 1C */
+#define MACH_ADM5120_RB_111 10 /* Mikrotik RouterBOARD 111 */
+#define MACH_ADM5120_RB_112 11 /* Mikrotik RouterBOARD 112 */
+#define MACH_ADM5120_RB_133 12 /* Mikrotik RouterBOARD 133 */
+#define MACH_ADM5120_RB_133C 13 /* Mikrotik RouterBOARD 133c */
+#define MACH_ADM5120_RB_150 14 /* Mikrotik RouterBOARD 150 */
+#define MACH_ADM5120_RB_153 15 /* Mikrotik RouterBOARD 153 */
+#define MACH_ADM5120_HS100 16 /* ZyXEL HomeSafe 100/100W */
+#define MACH_ADM5120_P334 17 /* ZyXEL Prestige 334 */
+#define MACH_ADM5120_P334U 18 /* ZyXEL Prestige 334U */
+#define MACH_ADM5120_P334W 19 /* ZyXEL Prestige 334W */
+#define MACH_ADM5120_P334WH 20 /* ZyXEL Prestige 334WH */
+#define MACH_ADM5120_P334WHD 21 /* ZyXEL Prestige 334WHD */
+#define MACH_ADM5120_P334WT 22 /* ZyXEL Prestige 334WT */
+#define MACH_ADM5120_P335 23 /* ZyXEL Prestige 335/335WT */
+#define MACH_ADM5120_P335PLUS 24 /* ZyXEL Prestige 335Plus */
+#define MACH_ADM5120_P335U 25 /* ZyXEL Prestige 335U */
+#define MACH_ADM5120_ES2108 26 /* ZyXEL Ethernet Switch 2108 */
+#define MACH_ADM5120_ES2108F 27 /* ZyXEL Ethernet Switch 2108-F */
+#define MACH_ADM5120_ES2108G 28 /* ZyXEL Ethernet Switch 2108-G */
+#define MACH_ADM5120_ES2108LC 29 /* ZyXEL Ethernet Switch 2108-LC */
+#define MACH_ADM5120_ES2108PWR 30 /* ZyXEL Ethernet Switch 2108-PWR */
+#define MACH_ADM5120_ES2024A 31 /* ZyXEL Ethernet Switch 2024A */
+#define MACH_ADM5120_ES2024PWR 32 /* ZyXEL Ethernet Switch 2024PWR */
+#define MACH_ADM5120_CAS630 33 /* Cellvision CAS-630/630W */
+#define MACH_ADM5120_CAS670 34 /* Cellvision CAS-670/670W */
+#define MACH_ADM5120_CAS700 36 /* Cellvision CAS-700/700W */
+#define MACH_ADM5120_CAS771 37 /* Cellvision CAS-771/771W */
+#define MACH_ADM5120_CAS790 38 /* Cellvision CAS-790 */
+#define MACH_ADM5120_CAS861 39 /* Cellvision CAS-861/861W */
+#define MACH_ADM5120_NFS101U 40 /* Cellvision NFS-101U/101WU */
+#define MACH_ADM5120_NFS202U 41 /* Cellvision NFS-202U/202WU */
+#define MACH_ADM5120_EASY5120 43 /* Infineon EASY 5120 */
+#define MACH_ADM5120_EASY5120RT 44 /* Infineon EASY 5120-RT */
+#define MACH_ADM5120_EASY5120PATA 45 /* Infineon EASY 5120P-ATA */
+#define MACH_ADM5120_EASY83000 46 /* Infineon EASY-83000 */
+#define MACH_ADM5120_BR6104K 47 /* Edimax BR-6104K */
+
#define CL_SIZE COMMAND_LINE_SIZE
const char *get_system_type(void);

27
target/linux/adm5120-2.6/patches/002-adm5120_flash.patch
Unescape View File

@ -0,0 +1,27 @@
Index: linux-2.6.21.1/drivers/mtd/maps/Kconfig
===================================================================
--- linux-2.6.21.1.orig/drivers/mtd/maps/Kconfig
+++ linux-2.6.21.1/drivers/mtd/maps/Kconfig
@@ -605,5 +605,10 @@ config MTD_PLATRAM
This selection automatically selects the map_ram driver.
+config MTD_ADM5120
+ tristate "Map driver for ADMtek ADM5120 boards"
+ depends on MIPS_ADM5120
+ select MTD_CFI_AMDSTD
+
endmenu
Index: linux-2.6.21.1/drivers/mtd/maps/Makefile
===================================================================
--- linux-2.6.21.1.orig/drivers/mtd/maps/Makefile
+++ linux-2.6.21.1/drivers/mtd/maps/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_MTD_OCELOT) += ocelot.o
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
+obj-$(CONFIG_MTD_ADM5120) += adm5120_mtd.o
obj-$(CONFIG_MTD_LASAT) += lasat.o
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
obj-$(CONFIG_MTD_EDB7312) += edb7312.o

27
target/linux/adm5120-2.6/patches/003-adm5120_switch.patch
Unescape View File

@ -0,0 +1,27 @@
Index: linux-2.6.21.1/drivers/net/Kconfig
===================================================================
--- linux-2.6.21.1.orig/drivers/net/Kconfig
+++ linux-2.6.21.1/drivers/net/Kconfig
@@ -574,6 +574,10 @@ config MIPS_AU1X00_ENET
If you have an Alchemy Semi AU1X00 based system
say Y. Otherwise, say N.
+config MIPS_ADM5120_ENET
+ tristate "MIPS ADM5120 Ethernet switch support"
+ depends on NET_ETHERNET && MIPS_ADM5120
+
config NET_SB1250_MAC
tristate "SB1250 Ethernet support"
depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
Index: linux-2.6.21.1/drivers/net/Makefile
===================================================================
--- linux-2.6.21.1.orig/drivers/net/Makefile
+++ linux-2.6.21.1/drivers/net/Makefile
@@ -165,6 +165,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
# This is also a 82596 and should probably be merged
obj-$(CONFIG_LP486E) += lp486e.o
+obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
obj-$(CONFIG_ETH16I) += eth16i.o
obj-$(CONFIG_ZORRO8390) += zorro8390.o
obj-$(CONFIG_HPLANCE) += hplance.o 7990.o

53
target/linux/adm5120-2.6/patches/004-adm5120_uart.patch
Unescape View File

@ -0,0 +1,53 @@
Index: linux-2.6.21.1/drivers/serial/Makefile
===================================================================
--- linux-2.6.21.1.orig/drivers/serial/Makefile
+++ linux-2.6.21.1/drivers/serial/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554)
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o
+obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
Index: linux-2.6.21.1/include/linux/serial_core.h
===================================================================
--- linux-2.6.21.1.orig/include/linux/serial_core.h
+++ linux-2.6.21.1/include/linux/serial_core.h
@@ -135,6 +135,9 @@
/* Xilinx uartlite */
#define PORT_UARTLITE 74
+/* ADMtek ADM5120 SoC */
+#define PORT_ADM5120 68
+
#ifdef __KERNEL__
#include <linux/compiler.h>
Index: linux-2.6.21.1/drivers/serial/Kconfig
===================================================================
--- linux-2.6.21.1.orig/drivers/serial/Kconfig
+++ linux-2.6.21.1/drivers/serial/Kconfig
@@ -256,6 +256,22 @@ config SERIAL_8250_AU1X00
comment "Non-8250 serial port support"
+config SERIAL_ADM5120
+ bool "ADM5120 serial port support"
+ depends on MIPS_ADM5120
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ help
+ Driver for the on chip UARTs on the ADM5120 SoC
+
+config ADM5120_NR_UARTS
+ int "Maximum number of ADM5120 serial ports"
+ depends on SERIAL_ADM5120
+ default "2"
+ ---help---
+ Set this to the number of serial ports you want the driver to
+ support.
+
config SERIAL_AMBA_PL010
tristate "ARM AMBA PL010 serial port support"
depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)

58
target/linux/adm5120-2.6/patches/005-adm5120_usb.patch
Unescape View File

@ -0,0 +1,58 @@
Index: linux-2.6.21.1/drivers/usb/core/hub.c
===================================================================
--- linux-2.6.21.1.orig/drivers/usb/core/hub.c
+++ linux-2.6.21.1/drivers/usb/core/hub.c
@@ -2227,6 +2227,8 @@ hub_port_init (struct usb_hub *hub, stru
USB_DT_DEVICE << 8, 0,
buf, GET_DESCRIPTOR_BUFSIZE,
(i ? USB_CTRL_GET_TIMEOUT : 1000));
+printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0,
+buf->bDescriptorType, USB_DT_DEVICE);
switch (buf->bMaxPacketSize0) {
case 8: case 16: case 32: case 64: case 255:
if (buf->bDescriptorType ==
Index: linux-2.6.21.1/drivers/usb/host/Kconfig
===================================================================
--- linux-2.6.21.1.orig/drivers/usb/host/Kconfig
+++ linux-2.6.21.1/drivers/usb/host/Kconfig
@@ -224,3 +224,6 @@ config USB_SL811_CS
To compile this driver as a module, choose M here: the
module will be called "sl811_cs".
+config USB_ADM5120_HCD
+ tristate "ADM5120 HCD support"
+ depends on USB && MIPS_ADM5120
Index: linux-2.6.21.1/drivers/usb/host/Makefile
===================================================================
--- linux-2.6.21.1.orig/drivers/usb/host/Makefile
+++ linux-2.6.21.1/drivers/usb/host/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o
+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
Index: linux-2.6.21.1/drivers/usb/Kconfig
===================================================================
--- linux-2.6.21.1.orig/drivers/usb/Kconfig
+++ linux-2.6.21.1/drivers/usb/Kconfig
@@ -91,8 +91,6 @@ source "drivers/usb/image/Kconfig"
source "drivers/usb/net/Kconfig"
-source "drivers/usb/mon/Kconfig"
-
comment "USB port drivers"
depends on USB
Index: linux-2.6.21.1/drivers/usb/Makefile
===================================================================
--- linux-2.6.21.1.orig/drivers/usb/Makefile
+++ linux-2.6.21.1/drivers/usb/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_USB_SL811_HCD) += host/
obj-$(CONFIG_USB_U132_HCD) += host/
obj-$(CONFIG_ETRAX_USB_HOST) += host/
obj-$(CONFIG_USB_OHCI_AT91) += host/
+obj-$(CONFIG_USB_ADM5120_HCD) += host/
obj-$(CONFIG_USB_ACM) += class/
obj-$(CONFIG_USB_PRINTER) += class/

45
target/linux/adm5120-2.6/patches/006-adm5120_leds.patch
Unescape View File

@ -0,0 +1,45 @@
Index: linux-2.6.21.1/drivers/leds/Kconfig
===================================================================
--- linux-2.6.21.1.orig/drivers/leds/Kconfig
+++ linux-2.6.21.1/drivers/leds/Kconfig
@@ -19,6 +19,27 @@ config LEDS_CLASS
comment "LED drivers"
+config LEDS_GPIO
+ tristate "LED support for LEDS on GPIO lines"
+ depends on LEDS_CLASS && GENERIC_GPIO
+ help
+ This option enables support for LEDs connected to GPIO lines
+
+config LEDS_ADM5120
+ tristate "LED Support for ADM5120 GPIO LEDs"
+ depends on LEDS_GPIO && MIPS_ADM5120
+ help
+ This option enables support for LEDs connected to GPIO lines
+ on ADM5120 SoC based platforms.
+
+config LEDS_ADM5120_EXPERIMENTAL
+ bool "Enable ADM5120 LEDs experimental code"
+ depends on LEDS_ADM5120
+
+config LEDS_ADM5120_DIAG
+ bool "Enable ADM5120 LEDs diagnostic mode"
+ depends on LEDS_ADM5120
+
config LEDS_CORGI
tristate "LED Support for the Sharp SL-C7x0 series"
depends on LEDS_CLASS && PXA_SHARP_C7xx
Index: linux-2.6.21.1/drivers/leds/Makefile
===================================================================
--- linux-2.6.21.1.orig/drivers/leds/Makefile
+++ linux-2.6.21.1/drivers/leds/Makefile
@@ -5,6 +5,8 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o
obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
# LED Platform Drivers
+obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
+obj-$(CONFIG_LEDS_ADM5120) += leds-adm5120.o
obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o

23
target/linux/adm5120-2.6/patches/007-adm5120_pci.patch
Unescape View File

@ -0,0 +1,23 @@
Index: linux-2.6.21.1/arch/mips/pci/Makefile
===================================================================
--- linux-2.6.21.1.orig/arch/mips/pci/Makefile
+++ linux-2.6.21.1/arch/mips/pci/Makefile
@@ -53,3 +53,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
+obj-$(CONFIG_PCI_ADM5120) += fixup-adm5120.o ops-adm5120.o pci-adm5120.o
Index: linux-2.6.21.1/include/linux/pci_ids.h
===================================================================
--- linux-2.6.21.1.orig/include/linux/pci_ids.h
+++ linux-2.6.21.1/include/linux/pci_ids.h
@@ -1701,6 +1701,9 @@
#define PCI_VENDOR_ID_ESDGMBH 0x12fe
#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
+#define PCI_VENDOR_ID_ADMTEK 0x1317
+#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120
+
#define PCI_VENDOR_ID_SIIG 0x131f
#define PCI_SUBVENDOR_ID_SIIG 0x131f
#define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000

38
target/linux/adm5120-2.6/patches/008-adm5120_hardware_swab.patch
Unescape View File

@ -0,0 +1,38 @@
--- linux-2.6.19.2/include/asm-mips/byteorder.h 2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2.new/include/asm-mips/byteorder.h 2007-05-16 21:14:47.000000000 +0200
@@ -58,6 +58,35 @@
#endif /* CONFIG_CPU_MIPSR2 */
+#ifdef CONFIG_ADM5120_HARDWARE_SWAB
+
+static __inline__ __attribute_const__ __u16 ___adm5120__swab16(__u16 x)
+{
+ __asm__ (
+ " sh %2, 0xCA(%1) \n"
+ " lhu %0, 0xCC(%1) \n"
+ : "=r" (x)
+ : "r" (0xB2000000), "r" (x));
+
+ return x;
+}
+
+static __inline__ __attribute_const__ __u32 ___adm5120__swab32(__u32 x)
+{
+ __asm__ (
+ " sw %2, 0xC8(%1) \n"
+ " lw %0, 0xCC(%1) \n"
+ : "=r" (x)
+ : "r" (0xB2000000), "r" (x));
+
+ return x;
+}
+
+#define __arch__swab16(x) ___adm5120__swab16(x)
+#define __arch__swab32(x) ___adm5120__swab32(x)
+
+#endif /* CONFIG_ADM5120_HARDWARE_SWAB */
+
#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __BYTEORDER_HAS_U64__
# define __SWAB_64_THRU_32__

39
target/linux/adm5120-2.6/patches/100-mtd-myloder-partition-parser.patch
Unescape View File

@ -0,0 +1,39 @@
Index: linux-2.6.21.1/drivers/mtd/Kconfig
===================================================================
--- linux-2.6.21.1.orig/drivers/mtd/Kconfig
+++ linux-2.6.21.1/drivers/mtd/Kconfig
@@ -157,6 +157,22 @@ config MTD_AFS_PARTS
for your particular device. It won't happen automatically. The
'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
+config MTD_MYLOADER_PARTS
+ tristate "MyLoader partition parsing"
+ depends on MIPS_ADM5120 && MTD_PARTITIONS
+ ---help---
+ MyLoader is a bootloader which allows the user to define partitions
+ in flash devices, by putting a table in the second erase block
+ on the device, similar to a partition table. This table gives the
+ offsets and lengths of the user defined partitions.
+
+ If you need code which can detect and parse these tables, and
+ register MTD 'partitions' corresponding to each image detected,
+ enable this option.
+
+ You will still need the parsing functions to be called by the driver
+ for your particular device. It won't happen automatically.
+
comment "User Modules And Translation Layers"
depends on MTD
Index: linux-2.6.21.1/drivers/mtd/Makefile
===================================================================
--- linux-2.6.21.1.orig/drivers/mtd/Makefile
+++ linux-2.6.21.1/drivers/mtd/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
# 'Users' - code which presents functionality to userspace.
obj-$(CONFIG_MTD_CHAR) += mtdchar.o

87
target/linux/adm5120-2.6/patches/101-cfi-fixup-macronix-bootloc.patch
Unescape View File

@ -0,0 +1,87 @@
Index: linux-2.6.21.1/drivers/mtd/chips/cfi_cmdset_0002.c
===================================================================
--- linux-2.6.21.1.orig/drivers/mtd/chips/cfi_cmdset_0002.c
+++ linux-2.6.21.1/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -47,12 +47,17 @@
#define MANUFACTURER_AMD 0x0001
#define MANUFACTURER_ATMEL 0x001F
#define MANUFACTURER_SST 0x00BF
+#define MANUFACTURER_MACRONIX 0x00C2
#define SST49LF004B 0x0060
#define SST49LF040B 0x0050
#define SST49LF008A 0x005a
#define AT49BV6416 0x00d6
#define MANUFACTURER_SAMSUNG 0x00ec
+/* Macronix */
+#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */
+#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */
+
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -217,6 +222,35 @@ static void fixup_use_atmel_lock(struct
mtd->flags |= MTD_STUPID_LOCK;
}
+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
+/*
+ * Some Macronix chips has bad bootblock information in the CFI table
+ */
+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
+{
+ struct map_info *map = mtd->priv;
+ struct cfi_private *cfi = map->fldrv_priv;
+ struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
+ __u8 major = extp->MajorVersion;
+ __u8 minor = extp->MinorVersion;
+
+ switch (cfi->id) {
+ /* TODO: put affected chip ids here */
+ case MX29LV160B:
+ case MX29LV320B:
+ if (((major << 8) | minor) != 0x3131)
+ break;
+
+ if (extp->TopBottom == 2)
+ break;
+
+ extp->TopBottom = 2; /* Bottom boot */
+ printk("%s: weird Macronix chip detected, id:0x%04X, boot location "
+ "forced to bottom\n", map->name, cfi->id);
+ }
+}
+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
+
static struct cfi_fixup cfi_fixup_table[] = {
#ifdef AMD_BOOTLOC_BUG
{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
@@ -231,6 +265,9 @@ static struct cfi_fixup cfi_fixup_table[
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
#endif
{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
+ { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
+#endif
{ 0, 0, NULL, NULL }
};
static struct cfi_fixup jedec_fixup_table[] = {
Index: linux-2.6.21.1/drivers/mtd/chips/Kconfig
===================================================================
--- linux-2.6.21.1.orig/drivers/mtd/chips/Kconfig
+++ linux-2.6.21.1/drivers/mtd/chips/Kconfig
@@ -199,6 +199,14 @@ config MTD_CFI_AMDSTD
provides support for one of those command sets, used on chips
including the AMD Am29LV320.
+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
+ bool "Force bottom boot for Macronix flash chips"
+ depends on MTD_CFI_AMDSTD
+ help
+ Some Macronix flash chips have wrong boot-block location in the
+ CFI table, and the driver may detect the type incorrectly. Select
+ this if your board has such chip.
+
config MTD_CFI_STAA
tristate "Support for ST (Advanced Architecture) flash chips"
depends on MTD_GEN_PROBE

26
target/linux/adm5120-2.6/patches/140-cmdline_hack.patch
Unescape View File

@ -0,0 +1,26 @@
Index: linux-2.6.21.1/arch/mips/kernel/head.S
===================================================================
--- linux-2.6.21.1.orig/arch/mips/kernel/head.S
+++ linux-2.6.21.1/arch/mips/kernel/head.S
@@ -129,14 +129,19 @@
#endif
.endm
-
j kernel_entry
nop
-
+ nop
+
/*
* Reserved space for exception handlers.
* Necessary for machines which link their kernels at KSEG0.
+ * Use as temporary storage for the kernel command line, so that it
+ * can be updated easily without having to relink the kernel.
*/
+
+EXPORT(_image_cmdline)
+ .ascii "CMDLINE:"
.align 10
EXPORT(stext) # used for profiling

29
target/linux/adm5120-2.6/patches/500-Nand.patch
Unescape View File

@ -0,0 +1,29 @@
Index: linux-2.6.21.1/drivers/mtd/nand/Kconfig
===================================================================
--- linux-2.6.21.1.orig/drivers/mtd/nand/Kconfig
+++ linux-2.6.21.1/drivers/mtd/nand/Kconfig
@@ -75,6 +75,12 @@ config MTD_NAND_TS7250
help
Support for NAND flash on Technologic Systems TS-7250 platform.
+config MTD_NAND_RB100
+ tristate "NAND Flash device on RB100 board"
+ depends on MTD_NAND
+ help
+ Support for NAND flash on RB100 platform.
+
config MTD_NAND_IDS
tristate
Index: linux-2.6.21.1/drivers/mtd/nand/Makefile
===================================================================
--- linux-2.6.21.1.orig/drivers/mtd/nand/Makefile
+++ linux-2.6.21.1/drivers/mtd/nand/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nan
obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
obj-$(CONFIG_MTD_NAND_TOTO) += toto.o
+obj-$(CONFIG_MTD_NAND_RB100) += rbmipsnand.o
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
Write Preview
Loading…
Cancel
Save