add uboot for NSA325 Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>master
parent
760185972f
commit
add1dd0081
@ -0,0 +1,709 @@ |
|||||||
|
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
|
||||||
|
index 819bd3b..6a2d578 100644
|
||||||
|
--- a/arch/arm/mach-kirkwood/Kconfig
|
||||||
|
+++ b/arch/arm/mach-kirkwood/Kconfig
|
||||||
|
@@ -55,6 +55,9 @@ config TARGET_NSA310
|
||||||
|
config TARGET_NSA310S
|
||||||
|
bool "Zyxel NSA310S"
|
||||||
|
|
||||||
|
+config TARGET_NSA325
|
||||||
|
+ bool "Zyxel NSA325 board"
|
||||||
|
+
|
||||||
|
endchoice
|
||||||
|
|
||||||
|
config SYS_SOC
|
||||||
|
@@ -77,5 +80,6 @@ source "board/Seagate/goflexhome/Kconfig"
|
||||||
|
source "board/Seagate/nas220/Kconfig"
|
||||||
|
source "board/zyxel/nsa310/Kconfig"
|
||||||
|
source "board/zyxel/nsa310s/Kconfig"
|
||||||
|
+source "board/zyxel/nsa325/Kconfig"
|
||||||
|
|
||||||
|
endif
|
||||||
|
diff --git a/board/zyxel/nsa325/Kconfig b/board/zyxel/nsa325/Kconfig
|
||||||
|
new file mode 100644
|
||||||
|
index 0000000..1fe5ead
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/board/zyxel/nsa325/Kconfig
|
||||||
|
@@ -0,0 +1,12 @@
|
||||||
|
+if TARGET_NSA325
|
||||||
|
+
|
||||||
|
+config SYS_BOARD
|
||||||
|
+ default "nsa325"
|
||||||
|
+
|
||||||
|
+config SYS_VENDOR
|
||||||
|
+ default "zyxel"
|
||||||
|
+
|
||||||
|
+config SYS_CONFIG_NAME
|
||||||
|
+ default "nsa325"
|
||||||
|
+
|
||||||
|
+endif
|
||||||
|
diff --git a/board/zyxel/nsa325/MAINTAINERS b/board/zyxel/nsa325/MAINTAINERS
|
||||||
|
new file mode 100644
|
||||||
|
index 0000000..130b4d9
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/board/zyxel/nsa325/MAINTAINERS
|
||||||
|
@@ -0,0 +1,6 @@
|
||||||
|
+NSA325 BOARD
|
||||||
|
+M: Alberto Bursi <alberto.bursi@outlook.it>
|
||||||
|
+S: Maintained
|
||||||
|
+F: board/zyxel/nsa325/
|
||||||
|
+F: include/configs/nsa325.h
|
||||||
|
+F: configs/nsa325_defconfig
|
||||||
|
diff --git a/board/zyxel/nsa325/Makefile b/board/zyxel/nsa325/Makefile
|
||||||
|
new file mode 100644
|
||||||
|
index 0000000..4ee953b
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/board/zyxel/nsa325/Makefile
|
||||||
|
@@ -0,0 +1,13 @@
|
||||||
|
+#
|
||||||
|
+# (C) Copyright 2015 bodhi <mibodhi@gmail.com>
|
||||||
|
+#
|
||||||
|
+# Based on
|
||||||
|
+# (C) Copyright 2009
|
||||||
|
+# Marvell Semiconductor <www.marvell.com>
|
||||||
|
+# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
||||||
|
+#
|
||||||
|
+# SPDX-License-Identifier: GPL-2.0+
|
||||||
|
+#
|
||||||
|
+
|
||||||
|
+obj-y := nsa325.o
|
||||||
|
+
|
||||||
|
diff --git a/board/zyxel/nsa325/kwbimage.cfg b/board/zyxel/nsa325/kwbimage.cfg
|
||||||
|
new file mode 100644
|
||||||
|
index 0000000..5a27d38
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/board/zyxel/nsa325/kwbimage.cfg
|
||||||
|
@@ -0,0 +1,78 @@
|
||||||
|
+# Copyright (C) 2015 bodhi <mibodhi@gmail.com>
|
||||||
|
+#
|
||||||
|
+# Extracted from Zyxel GPL source for u-boot-1.1.4_NSA325v2
|
||||||
|
+#
|
||||||
|
+# See file CREDITS for list of people who contributed to this
|
||||||
|
+# project.
|
||||||
|
+#
|
||||||
|
+# This program is free software; you can redistribute it and/or
|
||||||
|
+# modify it under the terms of the GNU General Public License as
|
||||||
|
+# published by the Free Software Foundation; either version 2 of
|
||||||
|
+# the License, or (at your option) any later version.
|
||||||
|
+#
|
||||||
|
+# This program is distributed in the hope that it will be useful,
|
||||||
|
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
+# GNU General Public License for more details.
|
||||||
|
+#
|
||||||
|
+# You should have received a copy of the GNU General Public License
|
||||||
|
+# along with this program; if not, write to the Free Software
|
||||||
|
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||||
|
+# MA 02110-1301 USA
|
||||||
|
+#
|
||||||
|
+# Refer docs/README.kwimage for more details about how-to configure
|
||||||
|
+# and create kirkwood boot image
|
||||||
|
+#
|
||||||
|
+
|
||||||
|
+# Boot Media configurations
|
||||||
|
+#BOOT_FROM uart
|
||||||
|
+BOOT_FROM nand
|
||||||
|
+NAND_ECC_MODE default
|
||||||
|
+NAND_PAGE_SIZE 0x0800
|
||||||
|
+
|
||||||
|
+# SOC registers configuration using bootrom header extension
|
||||||
|
+# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
|
||||||
|
+
|
||||||
|
+# Configure RGMII-0 interface pad voltage to 1.8V
|
||||||
|
+DATA 0xFFD100e0 0x1b1b1b9b
|
||||||
|
+
|
||||||
|
+#Dram initalization
|
||||||
|
+DATA 0xFFD01400 0x4301503E # DDR Configuration register
|
||||||
|
+DATA 0xFFD01404 0xB9843000 # DDR Controller Control Low
|
||||||
|
+DATA 0xFFD01408 0x33137777 # DDR Timing (Low)
|
||||||
|
+DATA 0xFFD0140C 0x16000C55 # DDR Timing (High)
|
||||||
|
+DATA 0xFFD01410 0x04000000 # DDR Address Control
|
||||||
|
+DATA 0xFFD01414 0x00000000 # DDR Open Pages Control
|
||||||
|
+DATA 0xFFD01418 0x00000000 # DDR Operation
|
||||||
|
+DATA 0xFFD0141C 0x00000672 # DDR Mode
|
||||||
|
+DATA 0xFFD01420 0x00000004 # DDR Extended Mode
|
||||||
|
+DATA 0xFFD01424 0x0000F14F # DDR Controller Control High
|
||||||
|
+DATA 0xFFD01428 0x000D6720 # DDR3 ODT Read Timing
|
||||||
|
+DATA 0xFFD0147C 0x0000B571 # DDR2 ODT Write Timing
|
||||||
|
+DATA 0xFFD01504 0x1FFFFFF1 # CS[0]n Size
|
||||||
|
+DATA 0xFFD01508 0x20000000 # CS[1]n Base address to 512Mb
|
||||||
|
+DATA 0xFFD0150C 0x1FFFFFF4 # CS[1]n Size 512Mb Window enabled for CS1
|
||||||
|
+DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
|
||||||
|
+DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
|
||||||
|
+DATA 0xFFD01494 0x00120000 # DDR ODT Control (Low)
|
||||||
|
+DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
|
||||||
|
+DATA 0xFFD0149C 0x0000E803 # CPU ODT Control
|
||||||
|
+
|
||||||
|
+DATA 0xFFD015D0 0x00000630
|
||||||
|
+DATA 0xFFD015D4 0x00000046
|
||||||
|
+DATA 0xFFD015D8 0x00000008
|
||||||
|
+DATA 0xFFD015DC 0x00000000
|
||||||
|
+DATA 0xFFD015E0 0x00000023
|
||||||
|
+DATA 0xFFD015E4 0x00203C18
|
||||||
|
+DATA 0xFFD01620 0x00384800
|
||||||
|
+DATA 0xFFD01480 0x00000001
|
||||||
|
+DATA 0xFFD20134 0x66666666
|
||||||
|
+DATA 0xFFD20138 0x00066666
|
||||||
|
+
|
||||||
|
+#Disable nsa325 hardware watchdog to allow successful kwbooting
|
||||||
|
+DATA 0xFFD10100 0x00004000 # set GPIO 14 to high to disable the watchdog
|
||||||
|
+DATA 0xFFD10104 0xFFFFBFFF # set GPIO 14 to output (to block any other input to it)
|
||||||
|
+
|
||||||
|
+# End of Header extension
|
||||||
|
+DATA 0x0 0x0
|
||||||
|
+
|
||||||
|
diff --git a/board/zyxel/nsa325/nsa325.c b/board/zyxel/nsa325/nsa325.c
|
||||||
|
new file mode 100644
|
||||||
|
index 0000000..4cd1c0f
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/board/zyxel/nsa325/nsa325.c
|
||||||
|
@@ -0,0 +1,265 @@
|
||||||
|
+/*
|
||||||
|
+ * Copyright (C) 2015 bodhi <mibodhi@gmail.com>
|
||||||
|
+ *
|
||||||
|
+ * Based on
|
||||||
|
+ * Copyright (C) 2014 Jason Plum <jplum@archlinuxarm.org>
|
||||||
|
+ *
|
||||||
|
+ * Based on nsa320.c originall written by
|
||||||
|
+ * Copyright (C) 2012 Peter Schildmann <linux@schildmann.info>
|
||||||
|
+ *
|
||||||
|
+ * Based on guruplug.c originally written by
|
||||||
|
+ * Siddarth Gore <gores@marvell.com>
|
||||||
|
+ * (C) Copyright 2009
|
||||||
|
+ * Marvell Semiconductor <www.marvell.com>
|
||||||
|
+ *
|
||||||
|
+ * See file CREDITS for list of people who contributed to this
|
||||||
|
+ * project.
|
||||||
|
+ *
|
||||||
|
+ * This program is free software; you can redistribute it and/or
|
||||||
|
+ * modify it under the terms of the GNU General Public License as
|
||||||
|
+ * published by the Free Software Foundation; either version 2 of
|
||||||
|
+ * the License, or (at your option) any later version.
|
||||||
|
+ *
|
||||||
|
+ * This program is distributed in the hope that it will be useful,
|
||||||
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
+ * GNU General Public License for more details.
|
||||||
|
+ *
|
||||||
|
+ * You should have received a copy of the GNU General Public License
|
||||||
|
+ * along with this program; if not, write to the Free Software
|
||||||
|
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||||
|
+ * MA 02110-1301 USA
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+#include <common.h>
|
||||||
|
+#include <miiphy.h>
|
||||||
|
+#include <asm/arch/soc.h>
|
||||||
|
+#include <asm/arch/mpp.h>
|
||||||
|
+#include <asm/arch/cpu.h>
|
||||||
|
+#include <asm/gpio.h>
|
||||||
|
+#include <asm/io.h>
|
||||||
|
+#include "nsa325.h"
|
||||||
|
+#include <asm/arch/gpio.h>
|
||||||
|
+
|
||||||
|
+DECLARE_GLOBAL_DATA_PTR;
|
||||||
|
+
|
||||||
|
+int board_early_init_f(void)
|
||||||
|
+{
|
||||||
|
+ /*
|
||||||
|
+ * default gpio configuration
|
||||||
|
+ * There are maximum 64 gpios controlled through 2 sets of registers
|
||||||
|
+ * the below configuration configures mainly initial LED status
|
||||||
|
+ */
|
||||||
|
+ mvebu_config_gpio(NSA325_VAL_LOW, NSA325_VAL_HIGH,
|
||||||
|
+ NSA325_OE_LOW, NSA325_OE_HIGH);
|
||||||
|
+
|
||||||
|
+ /* Multi-Purpose Pins Functionality configuration */
|
||||||
|
+ /* (all LEDs & power off active high) */
|
||||||
|
+ u32 kwmpp_config[] = {
|
||||||
|
+ MPP0_NF_IO2,
|
||||||
|
+ MPP1_NF_IO3,
|
||||||
|
+ MPP2_NF_IO4,
|
||||||
|
+ MPP3_NF_IO5,
|
||||||
|
+ MPP4_NF_IO6,
|
||||||
|
+ MPP5_NF_IO7,
|
||||||
|
+ MPP6_SYSRST_OUTn,
|
||||||
|
+ MPP7_GPO,
|
||||||
|
+ MPP8_TW_SDA, /* PCF8563 RTC chip */
|
||||||
|
+ MPP9_TW_SCK, /* connected to TWSI */
|
||||||
|
+ MPP10_UART0_TXD,
|
||||||
|
+ MPP11_UART0_RXD,
|
||||||
|
+ MPP12_GPO, /* HDD2 LED (green) */
|
||||||
|
+ MPP13_GPIO, /* HDD2 LED (red) */
|
||||||
|
+ MPP14_GPIO, /* MCU DATA pin (in) */
|
||||||
|
+ MPP15_GPIO, /* USB LED (green) */
|
||||||
|
+ MPP16_GPIO, /* MCU CLK pin (out) */
|
||||||
|
+ MPP17_GPIO, /* MCU ACT pin (out) */
|
||||||
|
+ MPP18_NF_IO0,
|
||||||
|
+ MPP19_NF_IO1,
|
||||||
|
+ MPP20_GPIO,
|
||||||
|
+ MPP21_GPIO, /* USB power */
|
||||||
|
+ MPP22_GPIO,
|
||||||
|
+ MPP23_GPIO,
|
||||||
|
+ MPP24_GPIO,
|
||||||
|
+ MPP25_GPIO,
|
||||||
|
+ MPP26_GPIO,
|
||||||
|
+ MPP27_GPIO,
|
||||||
|
+ MPP28_GPIO, /* SYS LED (green) */
|
||||||
|
+ MPP29_GPIO, /* SYS LED (orange) */
|
||||||
|
+ MPP30_GPIO,
|
||||||
|
+ MPP31_GPIO,
|
||||||
|
+ MPP32_GPIO,
|
||||||
|
+ MPP33_GPIO,
|
||||||
|
+ MPP34_GPIO,
|
||||||
|
+ MPP35_GPIO,
|
||||||
|
+ MPP36_GPIO, /* reset button */
|
||||||
|
+ MPP37_GPIO, /* copy button */
|
||||||
|
+ MPP38_GPIO, /* VID B0 */
|
||||||
|
+ MPP39_GPIO, /* COPY LED (green) */
|
||||||
|
+ MPP40_GPIO, /* COPY LED (red) */
|
||||||
|
+ MPP41_GPIO, /* HDD1 LED (green) */
|
||||||
|
+ MPP42_GPIO, /* HDD1 LED (red) */
|
||||||
|
+ MPP43_GPIO, /* HTP pin */
|
||||||
|
+ MPP44_GPIO, /* buzzer */
|
||||||
|
+ MPP45_GPIO, /* VID B1 */
|
||||||
|
+ MPP46_GPIO, /* power button */
|
||||||
|
+ MPP47_GPIO, /* HDD2 power */
|
||||||
|
+ MPP48_GPIO, /* power off */
|
||||||
|
+ 0
|
||||||
|
+ };
|
||||||
|
+ kirkwood_mpp_conf(kwmpp_config, NULL);
|
||||||
|
+ return 0;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+int board_init(void)
|
||||||
|
+{
|
||||||
|
+
|
||||||
|
+ /* address of boot parameters */
|
||||||
|
+ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
|
||||||
|
+
|
||||||
|
+ /* This disables the hardware watchdog in the mcu on this board. */
|
||||||
|
+ kw_gpio_set_valid(14, 1);
|
||||||
|
+ kw_gpio_direction_output(14, 0);
|
||||||
|
+ kw_gpio_set_value(14, 1);
|
||||||
|
+
|
||||||
|
+ return 0;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+#ifdef CONFIG_RESET_PHY_R
|
||||||
|
+/* Configure and enable MV88E1318 PHY */
|
||||||
|
+void reset_phy(void)
|
||||||
|
+{
|
||||||
|
+ u16 reg;
|
||||||
|
+ u16 devadr;
|
||||||
|
+ char *name = "egiga0";
|
||||||
|
+
|
||||||
|
+ if (miiphy_set_current_dev(name))
|
||||||
|
+ return;
|
||||||
|
+
|
||||||
|
+ /* command to read PHY dev address */
|
||||||
|
+ if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
|
||||||
|
+ printf("Err..%s could not read PHY dev address\n",
|
||||||
|
+ __FUNCTION__);
|
||||||
|
+ return;
|
||||||
|
+ }
|
||||||
|
+
|
||||||
|
+ /* Set RGMII delay */
|
||||||
|
+ miiphy_write(name, devadr, MV88E1318_PGADR_REG, MV88E1318_MAC_CTRL_PG);
|
||||||
|
+ miiphy_read(name, devadr, MV88E1318_MAC_CTRL_REG, ®);
|
||||||
|
+ reg |= (MV88E1318_RGMII_RXTM_CTRL | MV88E1318_RGMII_TXTM_CTRL);
|
||||||
|
+ miiphy_write(name, devadr, MV88E1318_MAC_CTRL_REG, reg);
|
||||||
|
+ miiphy_write(name, devadr, MV88E1318_PGADR_REG, 0);
|
||||||
|
+
|
||||||
|
+ /* reset the phy */
|
||||||
|
+ miiphy_reset(name, devadr);
|
||||||
|
+
|
||||||
|
+ /* The ZyXEL NSA325 uses the 88E1310S Alaska (interface identical to 88E1318) */
|
||||||
|
+ /* and has an MCU attached to the LED[2] via tristate interrupt */
|
||||||
|
+ reg = 0;
|
||||||
|
+
|
||||||
|
+ /* switch to LED register page */
|
||||||
|
+ miiphy_write(name, devadr, MV88E1318_PGADR_REG, MV88E1318_LED_PG);
|
||||||
|
+ /* read out LED polarity register */
|
||||||
|
+ miiphy_read(name, devadr, MV88E1318_LED_POL_REG, ®);
|
||||||
|
+ /* clear 4, set 5 - LED2 low, tri-state */
|
||||||
|
+ reg &= ~(MV88E1318_LED2_4);
|
||||||
|
+ reg |= (MV88E1318_LED2_5);
|
||||||
|
+ /* write back LED polarity register */
|
||||||
|
+ miiphy_write(name, devadr, MV88E1318_LED_POL_REG, reg);
|
||||||
|
+ /* jump back to page 0, per the PHY chip documenation. */
|
||||||
|
+ miiphy_write(name, devadr, MV88E1318_PGADR_REG, 0);
|
||||||
|
+
|
||||||
|
+ /* Set the phy back to auto-negotiation mode. Onboard mcu sets it as 10Mbits/s on poweroff for WoL function */
|
||||||
|
+ miiphy_write(name, devadr, 0x4, 0x1e1);
|
||||||
|
+ miiphy_write(name, devadr, 0x9, 0x300);
|
||||||
|
+ /* Downshift */
|
||||||
|
+ miiphy_write(name, devadr, 0x10, 0x3860);
|
||||||
|
+ miiphy_write(name, devadr, 0x0, 0x9140);
|
||||||
|
+
|
||||||
|
+ printf("MV88E1318 PHY initialized on %s\n", name);
|
||||||
|
+
|
||||||
|
+}
|
||||||
|
+#endif /* CONFIG_RESET_PHY_R */
|
||||||
|
+
|
||||||
|
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
|
||||||
|
+void show_boot_progress(int val)
|
||||||
|
+{
|
||||||
|
+ struct kwgpio_registers *gpio0 = (struct kwgpio_registers *)MVEBU_GPIO0_BASE;
|
||||||
|
+ u32 dout0 = readl(&gpio0->dout);
|
||||||
|
+ u32 blen0 = readl(&gpio0->blink_en);
|
||||||
|
+
|
||||||
|
+ struct kwgpio_registers *gpio1 = (struct kwgpio_registers *)MVEBU_GPIO1_BASE;
|
||||||
|
+ u32 dout1 = readl(&gpio1->dout);
|
||||||
|
+ u32 blen1 = readl(&gpio1->blink_en);
|
||||||
|
+
|
||||||
|
+ switch (val) {
|
||||||
|
+ case BOOTSTAGE_ID_DECOMP_IMAGE:
|
||||||
|
+ writel(blen0 & ~(SYS_GREEN_LED | SYS_ORANGE_LED), &gpio0->blink_en);
|
||||||
|
+ writel((dout0 & ~SYS_GREEN_LED) | SYS_ORANGE_LED, &gpio0->dout);
|
||||||
|
+ break;
|
||||||
|
+ case BOOTSTAGE_ID_RUN_OS:
|
||||||
|
+ writel(dout0 & ~SYS_ORANGE_LED, &gpio0->dout);
|
||||||
|
+ writel(blen0 | SYS_GREEN_LED, &gpio0->blink_en);
|
||||||
|
+ break;
|
||||||
|
+ case BOOTSTAGE_ID_NET_START:
|
||||||
|
+ writel(dout1 & ~COPY_RED_LED, &gpio1->dout);
|
||||||
|
+ writel((blen1 & ~COPY_RED_LED) | COPY_GREEN_LED, &gpio1->blink_en);
|
||||||
|
+ break;
|
||||||
|
+ case BOOTSTAGE_ID_NET_LOADED:
|
||||||
|
+ writel(blen1 & ~(COPY_RED_LED | COPY_GREEN_LED), &gpio1->blink_en);
|
||||||
|
+ writel((dout1 & ~COPY_RED_LED) | COPY_GREEN_LED, &gpio1->dout);
|
||||||
|
+ break;
|
||||||
|
+ case -BOOTSTAGE_ID_NET_NETLOOP_OK:
|
||||||
|
+ case -BOOTSTAGE_ID_NET_LOADED:
|
||||||
|
+ writel(dout1 & ~COPY_GREEN_LED, &gpio1->dout);
|
||||||
|
+ writel((blen1 & ~COPY_GREEN_LED) | COPY_RED_LED, &gpio1->blink_en);
|
||||||
|
+ break;
|
||||||
|
+ default:
|
||||||
|
+ if (val < 0) {
|
||||||
|
+ /* error */
|
||||||
|
+ printf("Error occured, error code = %d\n", -val);
|
||||||
|
+ writel(dout0 & ~SYS_GREEN_LED, &gpio0->dout);
|
||||||
|
+ writel(blen0 | SYS_ORANGE_LED, &gpio0->blink_en);
|
||||||
|
+ }
|
||||||
|
+ break;
|
||||||
|
+ }
|
||||||
|
+}
|
||||||
|
+#endif
|
||||||
|
+
|
||||||
|
+#if defined(CONFIG_KIRKWOOD_GPIO)
|
||||||
|
+/* Return GPIO button status */
|
||||||
|
+/*
|
||||||
|
+un-pressed:
|
||||||
|
+ gpio-36 (Reset Button ) in hi (act lo) - IRQ edge (clear )
|
||||||
|
+ gpio-37 (Copy Button ) in hi (act lo) - IRQ edge (clear )
|
||||||
|
+ gpio-46 (Power Button ) in lo (act hi) - IRQ edge (clear )
|
||||||
|
+pressed
|
||||||
|
+ gpio-36 (Reset Button ) in lo (act hi) - IRQ edge (clear )
|
||||||
|
+ gpio-37 (Copy Button ) in lo (act hi) - IRQ edge (clear )
|
||||||
|
+ gpio-46 (Power Button ) in hi (act lo) - IRQ edge (clear )
|
||||||
|
+*/
|
||||||
|
+
|
||||||
|
+static int
|
||||||
|
+do_read_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
||||||
|
+{
|
||||||
|
+ if (strcmp(argv[1], "power") == 0) {
|
||||||
|
+ kw_gpio_set_valid(BTN_POWER, GPIO_INPUT_OK);
|
||||||
|
+ kw_gpio_direction_input(BTN_POWER);
|
||||||
|
+ return !kw_gpio_get_value(BTN_POWER);
|
||||||
|
+ }
|
||||||
|
+ else if (strcmp(argv[1], "reset") == 0)
|
||||||
|
+ return kw_gpio_get_value(BTN_RESET);
|
||||||
|
+ else if (strcmp(argv[1], "copy") == 0)
|
||||||
|
+ return kw_gpio_get_value(BTN_COPY);
|
||||||
|
+ else
|
||||||
|
+ return -1;
|
||||||
|
+}
|
||||||
|
+
|
||||||
|
+
|
||||||
|
+U_BOOT_CMD(button, 2, 0, do_read_button,
|
||||||
|
+ "Return GPIO button status 0=off 1=on",
|
||||||
|
+ "- button power|reset|copy: test buttons states\n"
|
||||||
|
+);
|
||||||
|
+
|
||||||
|
+#endif
|
||||||
|
+
|
||||||
|
diff --git a/board/zyxel/nsa325/nsa325.h b/board/zyxel/nsa325/nsa325.h
|
||||||
|
new file mode 100644
|
||||||
|
index 0000000..996653e
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/board/zyxel/nsa325/nsa325.h
|
||||||
|
@@ -0,0 +1,77 @@
|
||||||
|
+/*
|
||||||
|
+ * Copyright (C) 2014 Jason Plum <jplum@archlinuxarm.org>
|
||||||
|
+ *
|
||||||
|
+ * Based on nsa320.h originall written by
|
||||||
|
+ * Copyright (C) 2012 Peter Schildmann <linux@schildmann.info>
|
||||||
|
+ *
|
||||||
|
+ * Based on guruplug.h originally written by
|
||||||
|
+ * Siddarth Gore <gores@marvell.com>
|
||||||
|
+ * (C) Copyright 2009
|
||||||
|
+ * Marvell Semiconductor <www.marvell.com>
|
||||||
|
+ *
|
||||||
|
+ * See file CREDITS for list of people who contributed to this
|
||||||
|
+ * project.
|
||||||
|
+ *
|
||||||
|
+ * This program is free software; you can redistribute it and/or
|
||||||
|
+ * modify it under the terms of the GNU General Public License as
|
||||||
|
+ * published by the Free Software Foundation; either version 2 of
|
||||||
|
+ * the License, or (at your option) any later version.
|
||||||
|
+ *
|
||||||
|
+ * This program is distributed in the hope that it will be useful,
|
||||||
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
+ * GNU General Public License for more details.
|
||||||
|
+ *
|
||||||
|
+ * You should have received a copy of the GNU General Public License
|
||||||
|
+ * along with this program; if not, write to the Free Software
|
||||||
|
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||||
|
+ * MA 02110-1301 USA
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+#ifndef __NSA325_H
|
||||||
|
+#define __NSA325_H
|
||||||
|
+
|
||||||
|
+/* low GPIO's */
|
||||||
|
+#define HDD2_GREEN_LED (1 << 12)
|
||||||
|
+#define HDD2_RED_LED (1 << 13)
|
||||||
|
+#define USB_GREEN_LED (1 << 15)
|
||||||
|
+#define USB_POWER (1 << 21)
|
||||||
|
+#define SYS_GREEN_LED (1 << 28)
|
||||||
|
+#define SYS_ORANGE_LED (1 << 29)
|
||||||
|
+
|
||||||
|
+#define PIN_USB_GREEN_LED 15
|
||||||
|
+#define PIN_USB_POWER 21
|
||||||
|
+
|
||||||
|
+#define NSA325_OE_LOW (~(HDD2_GREEN_LED | HDD2_RED_LED | \
|
||||||
|
+ USB_GREEN_LED | USB_POWER | \
|
||||||
|
+ SYS_GREEN_LED | SYS_ORANGE_LED))
|
||||||
|
+#define NSA325_VAL_LOW (SYS_GREEN_LED | USB_POWER)
|
||||||
|
+
|
||||||
|
+/* high GPIO's */
|
||||||
|
+#define COPY_GREEN_LED (1 << 7)
|
||||||
|
+#define COPY_RED_LED (1 << 8)
|
||||||
|
+#define HDD1_GREEN_LED (1 << 9)
|
||||||
|
+#define HDD1_RED_LED (1 << 10)
|
||||||
|
+#define HDD2_POWER (1 << 15)
|
||||||
|
+#define WATCHDOG_SIGNAL (1 << 14)
|
||||||
|
+
|
||||||
|
+#define NSA325_OE_HIGH (~(COPY_GREEN_LED | COPY_RED_LED | \
|
||||||
|
+ HDD1_GREEN_LED | HDD1_RED_LED | HDD2_POWER | WATCHDOG_SIGNAL ))
|
||||||
|
+#define NSA325_VAL_HIGH (WATCHDOG_SIGNAL | HDD2_POWER)
|
||||||
|
+
|
||||||
|
+/* PHY related */
|
||||||
|
+#define MV88E1318_PGADR_REG 22
|
||||||
|
+#define MV88E1318_MAC_CTRL_PG 2
|
||||||
|
+#define MV88E1318_MAC_CTRL_REG 21
|
||||||
|
+#define MV88E1318_RGMII_TXTM_CTRL (1 << 4)
|
||||||
|
+#define MV88E1318_RGMII_RXTM_CTRL (1 << 5)
|
||||||
|
+#define MV88E1318_LED_PG 3
|
||||||
|
+#define MV88E1318_LED_POL_REG 17
|
||||||
|
+#define MV88E1318_LED2_4 (1 << 4)
|
||||||
|
+#define MV88E1318_LED2_5 (1 << 5)
|
||||||
|
+
|
||||||
|
+#define BTN_POWER 46
|
||||||
|
+#define BTN_RESET 36
|
||||||
|
+#define BTN_COPY 37
|
||||||
|
+
|
||||||
|
+#endif /* __NSA325_H */
|
||||||
|
diff --git a/configs/nsa325_defconfig b/configs/nsa325_defconfig
|
||||||
|
new file mode 100644
|
||||||
|
index 0000000..48e09cc
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/configs/nsa325_defconfig
|
||||||
|
@@ -0,0 +1,18 @@
|
||||||
|
+CONFIG_ARM=y
|
||||||
|
+CONFIG_KIRKWOOD=y
|
||||||
|
+CONFIG_TARGET_NSA325=y
|
||||||
|
+CONFIG_BOOTDELAY=3
|
||||||
|
+CONFIG_SYS_PROMPT="NSA325> "
|
||||||
|
+# CONFIG_CMD_IMLS is not set
|
||||||
|
+# CONFIG_CMD_FLASH is not set
|
||||||
|
+CONFIG_SYS_NS16550=y
|
||||||
|
+CONFIG_CMD_FDT=y
|
||||||
|
+CONFIG_OF_LIBFDT=y
|
||||||
|
+CONFIG_CMD_SETEXPR=y
|
||||||
|
+CONFIG_CMD_DHCP=y
|
||||||
|
+CONFIG_CMD_NAND=y
|
||||||
|
+CONFIG_CMD_PING=y
|
||||||
|
+CONFIG_CMD_USB=y
|
||||||
|
+CONFIG_USB=y
|
||||||
|
+CONFIG_CMD_FAT=y
|
||||||
|
+CONFIG_USB_STORAGE=y
|
||||||
|
\ No newline at end of file
|
||||||
|
diff --git a/include/configs/nsa325.h b/include/configs/nsa325.h
|
||||||
|
new file mode 100644
|
||||||
|
index 0000000..e5a8e2a
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/include/configs/nsa325.h
|
||||||
|
@@ -0,0 +1,170 @@
|
||||||
|
+/*
|
||||||
|
+ * (C) Copyright 2016 bodhi <mibodhi@gmail.com>
|
||||||
|
+ *
|
||||||
|
+ * Based on
|
||||||
|
+ * Copyright (C) 2014 Jason Plum <jplum@archlinuxarm.org>
|
||||||
|
+ * Based on
|
||||||
|
+ * Copyright (C) 2012 Peter Schildmann <linux@schildmann.info>
|
||||||
|
+ *
|
||||||
|
+ * Based on guruplug.h originally written by
|
||||||
|
+ * Siddarth Gore <gores@marvell.com>
|
||||||
|
+ * (C) Copyright 2009
|
||||||
|
+ * Marvell Semiconductor <www.marvell.com>
|
||||||
|
+ *
|
||||||
|
+ * See file CREDITS for list of people who contributed to this
|
||||||
|
+ * project.
|
||||||
|
+ *
|
||||||
|
+ * This program is free software; you can redistribute it and/or
|
||||||
|
+ * modify it under the terms of the GNU General Public License as
|
||||||
|
+ * published by the Free Software Foundation; either version 2 of
|
||||||
|
+ * the License, or (at your option) any later version.
|
||||||
|
+ *
|
||||||
|
+ * This program is distributed in the hope that it will be useful,
|
||||||
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
+ * GNU General Public License for more details.
|
||||||
|
+ *
|
||||||
|
+ * You should have received a copy of the GNU General Public License
|
||||||
|
+ * along with this program; if not, write to the Free Software
|
||||||
|
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
||||||
|
+ * MA 02110-1301 USA
|
||||||
|
+ */
|
||||||
|
+
|
||||||
|
+#ifndef _CONFIG_NSA325_H
|
||||||
|
+#define _CONFIG_NSA325_H
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * Version number information
|
||||||
|
+ */
|
||||||
|
+#define CONFIG_IDENT_STRING "\nZyXEL NSA325 2-Bay Power Media Server"
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * High Level Configuration Options (easy to change)
|
||||||
|
+ */
|
||||||
|
+#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
|
||||||
|
+#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
|
||||||
|
+#define CONFIG_KW88F6281 1 /* SOC Name */
|
||||||
|
+
|
||||||
|
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * Misc Configuration Options
|
||||||
|
+ */
|
||||||
|
+#define CONFIG_SHOW_BOOT_PROGRESS 1 /* boot progess display (LED's) */
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * Commands configuration
|
||||||
|
+ */
|
||||||
|
+#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
|
||||||
|
+#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */
|
||||||
|
+#define CONFIG_CMD_DHCP
|
||||||
|
+#define CONFIG_CMD_ENV
|
||||||
|
+#define CONFIG_CMD_IDE
|
||||||
|
+#define CONFIG_CMD_MII
|
||||||
|
+#define CONFIG_CMD_NAND
|
||||||
|
+#define CONFIG_CMD_PING
|
||||||
|
+#define CONFIG_CMD_USB
|
||||||
|
+#define CONFIG_CMD_DATE
|
||||||
|
+#define CONFIG_SYS_LONGHELP
|
||||||
|
+#define CONFIG_PREBOOT
|
||||||
|
+#define CONFIG_SYS_HUSH_PARSER
|
||||||
|
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * mv-common.h should be defined after CMD configs since it used them
|
||||||
|
+ * to enable certain macros
|
||||||
|
+ */
|
||||||
|
+#include "mv-common.h"
|
||||||
|
+
|
||||||
|
+#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */
|
||||||
|
+#define CONFIG_SYS_PROMPT "NSA325> " /* Command Prompt */
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * Environment variables configurations
|
||||||
|
+ */
|
||||||
|
+#ifdef CONFIG_CMD_NAND
|
||||||
|
+#define CONFIG_ENV_IS_IN_NAND 1
|
||||||
|
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
|
||||||
|
+#else
|
||||||
|
+#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
|
||||||
|
+#endif
|
||||||
|
+/*
|
||||||
|
+ * max 4k env size is enough, but in case of nand
|
||||||
|
+ * it has to be rounded to sector size
|
||||||
|
+ */
|
||||||
|
+#define CONFIG_ENV_SIZE 0x20000 /* 128k */
|
||||||
|
+#define CONFIG_ENV_ADDR 0xc0000
|
||||||
|
+#define CONFIG_ENV_OFFSET 0xc0000 /* env starts here */
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * Default environment variables
|
||||||
|
+ */
|
||||||
|
+#define CONFIG_BOOTCOMMAND \
|
||||||
|
+ "ubi part ubi; " \
|
||||||
|
+ "ubi read 0x800000 kernel; " \
|
||||||
|
+ "bootm 0x800000"
|
||||||
|
+
|
||||||
|
+#define CONFIG_MTDPARTS \
|
||||||
|
+ "mtdparts=orion_nand:" \
|
||||||
|
+ "0x0c0000(uboot)," \
|
||||||
|
+ "0x80000(uboot_env)," \
|
||||||
|
+ "0x7ec0000(ubi)\0"
|
||||||
|
+
|
||||||
|
+#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||||
|
+ "console=console=ttyS0,115200\0" \
|
||||||
|
+ "mtdids=nand0=orion_nand\0" \
|
||||||
|
+ "mtdparts="CONFIG_MTDPARTS \
|
||||||
|
+ "bootargs_root=\0"
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * Ethernet Driver configuration
|
||||||
|
+ */
|
||||||
|
+#ifdef CONFIG_CMD_NET
|
||||||
|
+#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
|
||||||
|
+#define CONFIG_PHY_BASE_ADR 0x1
|
||||||
|
+#define CONFIG_PHY_GIGE
|
||||||
|
+#define CONFIG_NETCONSOLE
|
||||||
|
+#endif /* CONFIG_CMD_NET */
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * SATA Driver configuration
|
||||||
|
+ */
|
||||||
|
+#ifdef CONFIG_MVSATA_IDE
|
||||||
|
+#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
|
||||||
|
+#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
|
||||||
|
+#endif /* CONFIG_MVSATA_IDE */
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * File system
|
||||||
|
+ */
|
||||||
|
+#define CONFIG_CMD_EXT2
|
||||||
|
+#define CONFIG_CMD_EXT4
|
||||||
|
+#define CONFIG_CMD_FAT
|
||||||
|
+#define CONFIG_CMD_JFFS2
|
||||||
|
+#define CONFIG_JFFS2_NAND
|
||||||
|
+#define CONFIG_JFFS2_LZO
|
||||||
|
+#define CONFIG_CMD_UBI
|
||||||
|
+#define CONFIG_CMD_UBIFS
|
||||||
|
+#define CONFIG_RBTREE
|
||||||
|
+#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
|
||||||
|
+#define CONFIG_MTD_PARTITIONS
|
||||||
|
+#define CONFIG_CMD_MTDPARTS
|
||||||
|
+#define CONFIG_LZO
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * EFI partition
|
||||||
|
+ */
|
||||||
|
+#define CONFIG_EFI_PARTITION
|
||||||
|
+
|
||||||
|
+/*
|
||||||
|
+ * Date Time
|
||||||
|
+ */
|
||||||
|
+#ifdef CONFIG_CMD_DATE
|
||||||
|
+#define CONFIG_RTC_MV
|
||||||
|
+#define CONFIG_CMD_SNTP
|
||||||
|
+#define CONFIG_CMD_DNS
|
||||||
|
+#endif /* CONFIG_CMD_DATE */
|
||||||
|
+
|
||||||
|
+#define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */
|
||||||
|
+
|
||||||
|
+#endif /* _CONFIG_NSA325_H */
|
Loading…
Reference in new issue