ramips: fix lenovo newifi-y1 switch and LED config

There are 3 ethernet ports on Y1. LAN1 on port1, LAN2 on port0 and WAN on
port4.

Use a standalone switch configuration to match this and use the switch
trigger so that LAN LED could indicate the connetction status for both
lan ports correctly.

This patch also drop the internet led configuration, because there is a
WAN led for port4 and eth0.2 isn't always used as WAN.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
master
Chuanhong Guo 7 years ago committed by Mathias Kresin
parent 6912e55e71
commit a657978fe7
  1. 3
      target/linux/ramips/base-files/etc/board.d/01_leds
  2. 5
      target/linux/ramips/base-files/etc/board.d/02_network

@ -453,8 +453,7 @@ y1)
set_usb_led "$boardname:blue:usb" set_usb_led "$boardname:blue:usb"
ucidef_set_led_netdev "wifi" "WIFI" "$boardname:blue:wifi" "wlan1" ucidef_set_led_netdev "wifi" "WIFI" "$boardname:blue:wifi" "wlan1"
ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi5g" "wlan0" ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi5g" "wlan0"
ucidef_set_led_netdev "lan" "LAN" "$boardname:blue:lan" "eth0.1" "tx rx" ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x03"
ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx"
;; ;;
y1s) y1s)
set_usb_led "$boardname:blue:usb" set_usb_led "$boardname:blue:usb"

@ -111,7 +111,6 @@ ramips_setup_interfaces()
wndr3700v5|\ wndr3700v5|\
wt1520-4M|\ wt1520-4M|\
wt1520-8M|\ wt1520-8M|\
y1|\
youku-yk1|\ youku-yk1|\
zbt-ape522ii|\ zbt-ape522ii|\
zbt-we1326|\ zbt-we1326|\
@ -348,6 +347,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \ ucidef_add_switch "switch0" \
"1:lan" "2:lan" "0:wan" "6@eth0" "1:lan" "2:lan" "0:wan" "6@eth0"
;; ;;
y1)
ucidef_add_switch "switch0" \
"0:lan:2" "1:lan:1" "4:wan" "6@eth0"
;;
*) *)
RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"` RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
if [ -n "${RT3X5X}" ]; then if [ -n "${RT3X5X}" ]; then

Loading…
Cancel
Save