This commit adds support for the Wavlink WL-WN570HA1, a dual-band PoE wireless router with the following specifications: - CPU: MediaTek MT7688AN 580MHz - Flash: 8MB - RAM: 64MB - Ethernet: 1x 10/100Mbps - 2.4 GHz: 802.11b/g/n SoC, 1T1R, 27 dBm - 5 GHz: 802.11a/n/ac MT7610E, 1T1R, 25 dBm - Antennas: 2x external (1 per radio), detachable - LEDs: 3 programmable + Wi-Fi, WAN/LAN, Power - Buttons: Reset Flashing instructions: Factory U-boot launches a TFTP client if reset button is pressed during power-on. Rename the sysupgrade file and configure TFTP as follows: - Client (WL-WN570HA1) IP: 192.168.10.101 - Server IP: 192.168.10.100 - Filename: firmware.bin Signed-off-by: Thomas Vincent-Cross <me@tvc.id.au> [use generic board detection, add firmware partition compatible] Signed-off-by: Mathias Kresin <dev@kresin.me>master
parent
31469aebd4
commit
a160f50d4f
@ -0,0 +1,136 @@ |
||||
/dts-v1/; |
||||
#include <dt-bindings/input/input.h> |
||||
#include <dt-bindings/gpio/gpio.h> |
||||
|
||||
#include "mt7628an.dtsi" |
||||
|
||||
/ { |
||||
compatible = "wavlink,wl-wn570ha1", "mediatek,mt7628an-soc"; |
||||
model = "Wavlink WL-WN570HA1"; |
||||
|
||||
chosen { |
||||
bootargs = "console=ttyS0,57600"; |
||||
}; |
||||
|
||||
memory@0 { |
||||
device_type = "memory"; |
||||
reg = <0x0 0x4000000>; |
||||
}; |
||||
|
||||
gpio-keys-polled { |
||||
compatible = "gpio-keys-polled"; |
||||
poll-interval = <20>; |
||||
|
||||
reset { |
||||
label = "reset"; |
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
||||
linux,code = <KEY_RESTART>; |
||||
}; |
||||
}; |
||||
|
||||
gpio-leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
power { |
||||
label = "wl-wn570ha1:green:power"; |
||||
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; |
||||
default-state = "keep"; |
||||
}; |
||||
|
||||
wan { |
||||
label = "wl-wn570ha1:green:wan"; |
||||
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
wifi-high { |
||||
label = "wl-wn570ha1:green:wifi-high"; |
||||
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
wifi-med { |
||||
label = "wl-wn570ha1:green:wifi-med"; |
||||
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
wifi-low { |
||||
label = "wl-wn570ha1:green:wifi-low"; |
||||
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
wifi { |
||||
label = "wl-wn570ha1:green:wifi"; |
||||
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pinctrl { |
||||
state_default: pinctrl0 { |
||||
gpio { |
||||
ralink,group = "i2c", "wled_an", "p0led_an", "wdt", "refclk"; |
||||
ralink,function = "gpio"; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pcie { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&pcie0 { |
||||
wifi@0,0 { |
||||
reg = <0x0000 0 0 0 0>; |
||||
mediatek,mtd-eeprom = <&factory 0x8000>; |
||||
ieee80211-freq-limit = <5000000 6000000>; |
||||
}; |
||||
}; |
||||
|
||||
&spi0 { |
||||
status = "okay"; |
||||
|
||||
flash@0 { |
||||
compatible = "jedec,spi-nor"; |
||||
reg = <0>; |
||||
spi-max-frequency = <10000000>; |
||||
m25p,chunked-io = <32>; |
||||
|
||||
partitions { |
||||
compatible = "fixed-partitions"; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
|
||||
partition@0 { |
||||
label = "u-boot"; |
||||
reg = <0x0 0x30000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@30000 { |
||||
label = "u-boot-env"; |
||||
reg = <0x30000 0x10000>; |
||||
read-only; |
||||
}; |
||||
|
||||
factory: partition@40000 { |
||||
label = "factory"; |
||||
reg = <0x40000 0x10000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@50000 { |
||||
compatible = "denx,uimage"; |
||||
label = "firmware"; |
||||
reg = <0x50000 0x7b0000>; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&wmac { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
ðernet { |
||||
mtd-mac-address = <&factory 0x2e>; |
||||
mediatek,portmap = "llllw"; |
||||
}; |
Loading…
Reference in new issue