The initial support for the Buffalo WHR-HP-G300N box. The code was confirmed to boot and run, but not tested in depth. Known problem: iw phy phy0 info shows: Coverage class: 0 (up to 0m) Available Antennas: TX 0 RX 0 Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 28567master
parent
61441fe2de
commit
9d51cda2db
@ -0,0 +1,24 @@ |
||||
config interface loopback |
||||
option ifname lo |
||||
option proto static |
||||
option ipaddr 127.0.0.1 |
||||
option netmask 255.0.0.0 |
||||
|
||||
config interface lan |
||||
option ifname eth0 |
||||
option type bridge |
||||
option proto static |
||||
option ipaddr 192.168.1.1 |
||||
option netmask 255.255.255.0 |
||||
|
||||
config interface wan |
||||
option ifname eth1 |
||||
option proto dhcp |
||||
|
||||
config switch eth0 |
||||
option enable_vlan 1 |
||||
|
||||
config switch_vlan |
||||
option device eth0 |
||||
option vlan 1 |
||||
option ports "0 1 2 3 4" |
@ -0,0 +1,171 @@ |
||||
/*
|
||||
* Buffalo WHR-HP-G300N board support |
||||
* |
||||
* based on ... |
||||
* |
||||
* TP-LINK TL-WR741ND board support |
||||
* |
||||
* Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify it |
||||
* under the terms of the GNU General Public License version 2 as published |
||||
* by the Free Software Foundation. |
||||
*/ |
||||
|
||||
#include <linux/mtd/mtd.h> |
||||
#include <linux/mtd/partitions.h> |
||||
|
||||
#include <asm/mach-ar71xx/ar71xx.h> |
||||
|
||||
#include "machtype.h" |
||||
#include "devices.h" |
||||
#include "dev-m25p80.h" |
||||
#include "dev-ap91-pci.h" |
||||
#include "dev-gpio-buttons.h" |
||||
#include "dev-leds-gpio.h" |
||||
|
||||
#define WHRHPG300N_GPIO_LED_SECURITY 0 |
||||
#define WHRHPG300N_GPIO_LED_DIAG 1 |
||||
#define WHRHPG300N_GPIO_LED_ROUTER 6 |
||||
|
||||
#define WHRHPG300N_GPIO_BTN_ROUTER_ON 7 |
||||
#define WHRHPG300N_GPIO_BTN_ROUTER_AUTO 8 |
||||
#define WHRHPG300N_GPIO_BTN_RESET 11 |
||||
#define WHRHPG300N_GPIO_BTN_AOSS 12 |
||||
|
||||
#define WHRHPG300N_KEYS_POLL_INTERVAL 20 /* msecs */ |
||||
#define WHRHPG300N_KEYS_DEBOUNCE_INTERVAL (3 * WHRHPG300N_KEYS_POLL_INTERVAL) |
||||
|
||||
#define WHRHPG300N_MAC_OFFSET 0x20c |
||||
|
||||
#ifdef CONFIG_MTD_PARTITIONS |
||||
static struct mtd_partition whrhpg300n_partitions[] = { |
||||
{ |
||||
.name = "u-boot", |
||||
.offset = 0, |
||||
.size = 0x03e000, |
||||
.mask_flags = MTD_WRITEABLE, |
||||
}, { |
||||
.name = "u-boot-env", |
||||
.offset = 0x03e000, |
||||
.size = 0x002000, |
||||
}, { |
||||
.name = "kernel", |
||||
.offset = 0x040000, |
||||
.size = 0x0e0000, |
||||
}, { |
||||
.name = "rootfs", |
||||
.offset = 0x120000, |
||||
.size = 0x2c0000, |
||||
}, { |
||||
.name = "NVRAM", |
||||
.offset = 0x3e0000, |
||||
.size = 0x010000, |
||||
}, { |
||||
.name = "ART", |
||||
.offset = 0x3f0000, |
||||
.size = 0x010000, |
||||
.mask_flags = MTD_WRITEABLE, |
||||
}, { |
||||
.name = "firmware", |
||||
.offset = 0x040000, |
||||
.size = 0x3a0000, |
||||
} |
||||
}; |
||||
#endif /* CONFIG_MTD_PARTITIONS */ |
||||
|
||||
static struct flash_platform_data whrhpg300n_flash_data = { |
||||
#ifdef CONFIG_MTD_PARTITIONS |
||||
.parts = whrhpg300n_partitions, |
||||
.nr_parts = ARRAY_SIZE(whrhpg300n_partitions), |
||||
#endif |
||||
}; |
||||
|
||||
static struct gpio_led whrhpg300n_leds_gpio[] __initdata = { |
||||
{ |
||||
.name = "whr-hp-g300n:orange:security", |
||||
.gpio = WHRHPG300N_GPIO_LED_SECURITY, |
||||
.active_low = 1, |
||||
}, { |
||||
.name = "whr-hp-g300n:red:diag", |
||||
.gpio = WHRHPG300N_GPIO_LED_DIAG, |
||||
.active_low = 1, |
||||
}, { |
||||
.name = "whr-hp-g300n:green:router", |
||||
.gpio = WHRHPG300N_GPIO_LED_ROUTER, |
||||
.active_low = 1, |
||||
} |
||||
}; |
||||
|
||||
static struct gpio_keys_button whrhpg300n_gpio_keys[] __initdata = { |
||||
{ |
||||
.desc = "reset", |
||||
.type = EV_KEY, |
||||
.code = KEY_RESTART, |
||||
.debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, |
||||
.gpio = WHRHPG300N_GPIO_BTN_RESET, |
||||
.active_low = 1, |
||||
}, { |
||||
.desc = "aoss/wps", |
||||
.type = EV_KEY, |
||||
.code = KEY_WPS_BUTTON, |
||||
.gpio = WHRHPG300N_GPIO_BTN_AOSS, |
||||
.debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, |
||||
.active_low = 1, |
||||
}, { |
||||
.desc = "router_on", |
||||
.type = EV_KEY, |
||||
.code = BTN_2, |
||||
.gpio = WHRHPG300N_GPIO_BTN_ROUTER_ON, |
||||
.debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, |
||||
.active_low = 1, |
||||
}, { |
||||
.desc = "router_auto", |
||||
.type = EV_KEY, |
||||
.code = BTN_3, |
||||
.gpio = WHRHPG300N_GPIO_BTN_ROUTER_AUTO, |
||||
.debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL, |
||||
.active_low = 1, |
||||
} |
||||
}; |
||||
|
||||
static void __init whrhpg300n_setup(void) |
||||
{ |
||||
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); |
||||
u8 *mac = (u8 *) KSEG1ADDR(ee + WHRHPG300N_MAC_OFFSET); |
||||
|
||||
ar71xx_add_device_m25p80(&whrhpg300n_flash_data); |
||||
|
||||
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(whrhpg300n_leds_gpio), |
||||
whrhpg300n_leds_gpio); |
||||
|
||||
ar71xx_register_gpio_keys_polled(-1, WHRHPG300N_KEYS_POLL_INTERVAL, |
||||
ARRAY_SIZE(whrhpg300n_gpio_keys), |
||||
whrhpg300n_gpio_keys); |
||||
|
||||
ar71xx_eth1_data.has_ar7240_switch = 1; |
||||
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); |
||||
ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); |
||||
|
||||
/* WAN port */ |
||||
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; |
||||
ar71xx_eth0_data.speed = SPEED_100; |
||||
ar71xx_eth0_data.duplex = DUPLEX_FULL; |
||||
ar71xx_eth0_data.phy_mask = BIT(4); |
||||
|
||||
/* LAN ports */ |
||||
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; |
||||
ar71xx_eth1_data.speed = SPEED_1000; |
||||
ar71xx_eth1_data.duplex = DUPLEX_FULL; |
||||
|
||||
ar71xx_add_device_mdio(0x0); |
||||
ar71xx_add_device_eth(1); |
||||
ar71xx_add_device_eth(0); |
||||
|
||||
ap91_pci_setup_wmac_led_pin(1); |
||||
|
||||
ap91_pci_init(ee, mac); |
||||
} |
||||
|
||||
MIPS_MACHINE(AR71XX_MACH_WHR_HP_G300N, "WHR-HP-G300N", "Buffalo WHR-HP-G300N", |
||||
whrhpg300n_setup); |
Loading…
Reference in new issue