ramips: Adding support for AXIMCom MR-102N 3G/4G Travel Mobile Router

MR-102N is a RT3050F based wireless router(32M RAM + 8M NOR flash) with 1 USB
and 1 ethernet port.  The original product information can be found at:
http://www.aximcom.com/en/MR-102N

Signed-off-by:	Tai-hwa Liang <atliang@gmail.com>

SVN-Revision: 45724
master
John Crispin 10 years ago
parent 4810f3f803
commit 9c86abae0e
  1. 4
      target/linux/ramips/base-files/etc/board.d/01_leds
  2. 3
      target/linux/ramips/base-files/etc/board.d/02_network
  3. 3
      target/linux/ramips/base-files/etc/diag.sh
  4. 3
      target/linux/ramips/base-files/lib/ramips.sh
  5. 1
      target/linux/ramips/base-files/lib/upgrade/platform.sh
  6. 111
      target/linux/ramips/dts/MR-102N.dts
  7. 3
      target/linux/ramips/image/Makefile
  8. 17
      target/linux/ramips/rt305x/profiles/aximcom.mk

@ -145,6 +145,10 @@ case $board in
mpr-a2) mpr-a2)
set_wifi_led "hame:blue:system" set_wifi_led "hame:blue:system"
;; ;;
mr-102n)
set_wifi_led "mr-102n:green:wlan"
set_usb_led "mr-102n:green:usb"
;;
mzk-w300nh2) mzk-w300nh2)
set_wifi_led "mzkw300nh2:amber:wlan" set_wifi_led "mzkw300nh2:amber:wlan"
;; ;;

@ -61,7 +61,8 @@ ramips_setup_interfaces()
;; ;;
3g-6200nl | \ 3g-6200nl | \
mlw221) mlw221 | \
mr-102n)
ucidef_set_interface_lan "eth0.2" ucidef_set_interface_lan "eth0.2"
;; ;;
mlwg2) mlwg2)

@ -104,6 +104,9 @@ get_status_led() {
mpr-a2) mpr-a2)
status_led="hame:red:power" status_led="hame:red:power"
;; ;;
mr-102n)
status_led="mr-102n:amber:status"
;;
nbg-419n) nbg-419n)
status_led="nbg-419n:green:power" status_led="nbg-419n:green:power"
;; ;;

@ -85,6 +85,9 @@ ramips_board_detect() {
*"Aztech HW550-3G") *"Aztech HW550-3G")
name="hw550-3g" name="hw550-3g"
;; ;;
*"AXIMCom MR-102N")
name="mr-102n"
;;
*"Buffalo WSR-600DHP") *"Buffalo WSR-600DHP")
name="wsr-600" name="wsr-600"
;; ;;

@ -67,6 +67,7 @@ platform_check_image() {
mofi3500-3gn | \ mofi3500-3gn | \
mpr-a1 | \ mpr-a1 | \
mpr-a2 | \ mpr-a2 | \
mr-102n | \
mzk-w300nh2 | \ mzk-w300nh2 | \
nbg-419n | \ nbg-419n | \
nw718 | \ nw718 | \

@ -0,0 +1,111 @@
/dts-v1/;
/include/ "rt3050.dtsi"
/ {
compatible = "MR-102N", "ralink,rt3052-soc";
model = "AXIMCom MR-102N";
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
ralink,function = "gpio";
};
};
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x790000>;
};
partition@7e0000 {
label = "nvram";
reg = <0x7e0000 0x10000>;
};
partition@7f0000 {
label = "nvram_backup";
reg = <0x7f0000 0x10000>;
};
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x4>;
};
esw@10110000 {
status = "okay";
#ralink,portmap = <0x3e>;
ralink,portmap = <0x2f>;
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
gpio-leds {
compatible = "gpio-leds";
usb {
label = "mr-102n:green:usb";
gpios = <&gpio0 8 1>;
};
status {
label = "mr-102n:amber:status";
gpios = <&gpio0 9 1>;
};
wlan {
label = "mr-102n:green:wlan";
gpios = <&gpio0 11 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 13 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 18 1>;
linux,code = <0x211>;
};
};
otg@101c0000 {
status = "okay";
};
};

@ -554,6 +554,8 @@ Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi35
# Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI # Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI
Image/Build/Profile/3G150B=$(call BuildFirmware/Default4M/$(1),$(1),3g150b,3G150B,Linux Kernel Image) Image/Build/Profile/3G150B=$(call BuildFirmware/Default4M/$(1),$(1),3g150b,3G150B,Linux Kernel Image)
Image/Build/Profile/MR102N=$(call BuildFirmware/Default8M/$(1),$(1),mr-102n,MR-102N)
Image/Build/Profile/MPRA1=$(call BuildFirmware/Default4M/$(1),$(1),mpr-a1,MPRA1,Linux Kernel Image) Image/Build/Profile/MPRA1=$(call BuildFirmware/Default4M/$(1),$(1),mpr-a1,MPRA1,Linux Kernel Image)
Image/Build/Profile/MPRA2=$(call BuildFirmware/Default8M/$(1),$(1),mpr-a2,MPRA2,Linux Kernel Image) Image/Build/Profile/MPRA2=$(call BuildFirmware/Default8M/$(1),$(1),mpr-a2,MPRA2,Linux Kernel Image)
@ -724,6 +726,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/M3,$(1)) $(call Image/Build/Profile/M3,$(1))
$(call Image/Build/Profile/M4,$(1)) $(call Image/Build/Profile/M4,$(1))
$(call Image/Build/Profile/MOFI3500-3GN,$(1)) $(call Image/Build/Profile/MOFI3500-3GN,$(1))
$(call Image/Build/Profile/MR102N,$(1))
$(call Image/Build/Profile/MPRA1,$(1)) $(call Image/Build/Profile/MPRA1,$(1))
$(call Image/Build/Profile/MPRA2,$(1)) $(call Image/Build/Profile/MPRA2,$(1))
$(call Image/Build/Profile/MZKW300NH2,$(1)) $(call Image/Build/Profile/MZKW300NH2,$(1))

@ -0,0 +1,17 @@
#
# Copyright (C) 2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/MR102N
NAME:=AXIMCom MR-102N
PACKAGES:=kmod-usb-core kmod-usb-dwc2 kmod-ledtrig-usbdev
endef
define Profile/MR102N/Description
Package set for AXIMCom MR-102N
endef
$(eval $(call Profile,MR102N))
Loading…
Cancel
Save