This commit adds support for the TP-link Archer C2 V3 (AC900). Specifications: - CPU: QCA9563 750Mhz - Ram: 64MB (DDR2) - Flash: 8MB (SPI NOR) - Ethernet: 5x 10/100/1000 - Wifi: QCA9563 bgn + QCA9887 an+ac - 9x Leds, 2x buttons Flash instructions: Upload openwrt-ath79-generic-tplink_archer-c2-v3-squashfs-factory.bin via the router Web interface and flash as normal firmware update. Signed-off-by: Skirmantas Lauzikas <skirmantas.lauzikas@blackraven.lt> [reorder entries, fix trailing whitespace in dts, add firmware partition compatible string, remove led default off states, use default on state for system led, reuse tplink-safeloader-uimage image build recipe, squash with dynamic partitioning commit, reword commit message, add installation instructions] Signed-off-by: Jo-Philipp Wich <jo@mein.io>master
parent
30f48fb107
commit
9c01273e5e
@ -0,0 +1,185 @@ |
|||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h> |
||||||
|
#include <dt-bindings/input/input.h> |
||||||
|
|
||||||
|
#include "qca956x.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
compatible = "tplink,archer-c2-v3", "qca,qca9563"; |
||||||
|
model = "TP-Link Archer C2 Version 3"; |
||||||
|
|
||||||
|
chosen { |
||||||
|
bootargs = "console=ttyS0,115200n8"; |
||||||
|
}; |
||||||
|
|
||||||
|
aliases { |
||||||
|
led-boot = &system; |
||||||
|
led-failsafe = &system; |
||||||
|
led-running = &system; |
||||||
|
led-upgrade = &system; |
||||||
|
}; |
||||||
|
|
||||||
|
gpio_leds: leds { |
||||||
|
compatible = "gpio-leds"; |
||||||
|
|
||||||
|
system: system { |
||||||
|
label = "tp-link:green:system"; |
||||||
|
gpios = <&gpio 6 GPIO_ACTIVE_LOW>; |
||||||
|
default-state = "on"; |
||||||
|
}; |
||||||
|
|
||||||
|
wifi2g { |
||||||
|
label = "tp-link:green:wifi2g"; |
||||||
|
gpios = <&gpio 8 GPIO_ACTIVE_LOW>; |
||||||
|
linux,default-trigger = "phy1tpt"; |
||||||
|
}; |
||||||
|
|
||||||
|
wifi5g { |
||||||
|
label = "tp-link:green:wifi5g"; |
||||||
|
gpios = <&gpio 7 GPIO_ACTIVE_LOW>; |
||||||
|
linux,default-trigger = "phy0tpt"; |
||||||
|
}; |
||||||
|
|
||||||
|
wifi_wps { |
||||||
|
label = "tp-link:green:wps"; |
||||||
|
gpios = <&gpio 1 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
|
||||||
|
wan { |
||||||
|
label = "tp-link:green:wan"; |
||||||
|
gpios = <&gpio 16 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
|
||||||
|
wan_fail { |
||||||
|
label = "tp-link:orange:wan"; |
||||||
|
gpios = <&gpio 15 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
|
||||||
|
lan1 { |
||||||
|
label = "tp-link:green:lan1"; |
||||||
|
gpios = <&gpio 9 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
|
||||||
|
lan2 { |
||||||
|
label = "tp-link:green:lan2"; |
||||||
|
gpios = <&gpio 11 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
|
||||||
|
lan3 { |
||||||
|
label = "tp-link:green:lan3"; |
||||||
|
gpios = <&gpio 14 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
|
||||||
|
lan4 { |
||||||
|
label = "tp-link:green:lan4"; |
||||||
|
gpios = <&gpio 21 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
keys { |
||||||
|
compatible = "gpio-keys"; |
||||||
|
|
||||||
|
reset { |
||||||
|
label = "Reset button"; |
||||||
|
linux,code = <KEY_RESTART>; |
||||||
|
gpios = <&gpio 2 GPIO_ACTIVE_LOW>; |
||||||
|
debounce-interval = <60>; |
||||||
|
}; |
||||||
|
|
||||||
|
wps { |
||||||
|
label = "WPS button"; |
||||||
|
linux,code = <KEY_WPS_BUTTON>; |
||||||
|
gpios = <&gpio 5 GPIO_ACTIVE_LOW>; |
||||||
|
debounce-interval = <60>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&uart { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&spi { |
||||||
|
status = "okay"; |
||||||
|
num-cs = <1>; |
||||||
|
|
||||||
|
flash@0 { |
||||||
|
compatible = "jedec,spi-nor"; |
||||||
|
reg = <0>; |
||||||
|
spi-max-frequency = <25000000>; |
||||||
|
|
||||||
|
partitions { |
||||||
|
compatible = "fixed-partitions"; |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
|
||||||
|
partition@0 { |
||||||
|
label = "factory-uboot"; |
||||||
|
reg = <0x000000 0x020000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@20000 { |
||||||
|
label = "uboot"; |
||||||
|
reg = <0x020000 0x10000>; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@30000 { |
||||||
|
label = "firmware"; |
||||||
|
reg = <0x030000 0x7A0000>; |
||||||
|
compatible = "denx,uimage"; |
||||||
|
}; |
||||||
|
|
||||||
|
info: partition@7e0000 { |
||||||
|
label = "product-info"; |
||||||
|
reg = <0x7e0000 0x010000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
art: partition@7f0000 { |
||||||
|
label = "ART"; |
||||||
|
reg = <0x7f0000 0x010000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&gpio { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&mdio0 { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
phy-mask = <0>; |
||||||
|
phy0: ethernet-phy@0 { |
||||||
|
reg = <0>; |
||||||
|
phy-mode = "sgmii"; |
||||||
|
|
||||||
|
qca,ar8327-initvals = < |
||||||
|
0x04 0x00080080 /* PORT0 PAD MODE CTRL */ |
||||||
|
0x7c 0x0000007e /* PORT0_STATUS */ |
||||||
|
>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&pcie { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
ð0 { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
mtd-mac-address = <&info 0x8>; |
||||||
|
phy-mode = "sgmii"; |
||||||
|
phy-handle = <&phy0>; |
||||||
|
}; |
||||||
|
|
||||||
|
&wmac { |
||||||
|
status = "okay"; |
||||||
|
mtd-cal-data = <&art 0x1000>; |
||||||
|
mtd-mac-address = <&info 0x8>; |
||||||
|
}; |
Loading…
Reference in new issue