This commit adds support for the Archer C58 v1 and C59 v1, previously
supported in the ar71xx target.
CPU: Qualcomm QCA9561
RAM: 64M (C58) / 128M (C59)
FLASH: 8M (C58) / 16M (C59)
WiFi: QCA9561 bgn 3x3:3
QCA9888 nac 2x2:2
LED: Power, WiFi 2.4, WiFi 5, WAN green, WAN amber, LAN, WPS
Only C59: USB
BTN: WPS, WiFi, Reset
Installation
------------
Via Web-UI:
Update factory image via Web-UI.
Via TFTP:
Rename factory image to "tp_recovery.bin" and place it in the root-dir
of your tftp server. Configure to listen on 192.168.0.66. Power up the
router while holding down the reset-button. The router will flash itself
and reboot.
Note: For TFTP, you might need a switch between router and computer, as
link establishment might take to long.
Signed-off-by: David Bauer <mail@david-bauer.net>
master
David Bauer
6 years ago
committed by
John Crispin
parent
89eb1a6d72
commit
946ffe470d
@ -0,0 +1,130 @@ |
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||
/dts-v1/; |
||||
|
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
#include "qca9561_tplink_archer-c5x.dtsi" |
||||
|
||||
/ { |
||||
compatible = "tplink,archer-c58-v1", "qca,qca9560"; |
||||
model = "TP-LINK Archer C58 v1"; |
||||
|
||||
aliases { |
||||
led-boot = &power; |
||||
led-failsafe = &power; |
||||
led-running = &power; |
||||
led-upgrade = &power; |
||||
}; |
||||
|
||||
leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
power: power { |
||||
label = "tp-link:green:power"; |
||||
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; |
||||
default-state = "on"; |
||||
}; |
||||
|
||||
wlan2g { |
||||
label = "tp-link:green:wlan2g"; |
||||
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; |
||||
linux,default-trigger = "phy1tpt"; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
wlan5g { |
||||
label = "tp-link:green:wlan5g"; |
||||
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; |
||||
linux,default-trigger = "phy0tpt"; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
wan_green { |
||||
label = "tp-link:green:wan"; |
||||
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
wan_amber { |
||||
label = "tp-link:amber:wan"; |
||||
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
lan { |
||||
label = "tp-link:green:lan"; |
||||
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
wps { |
||||
label = "tp-link:green:wps"; |
||||
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; |
||||
default-state = "off"; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&spi { |
||||
status = "okay"; |
||||
num-cs = <1>; |
||||
|
||||
flash@0 { |
||||
compatible = "jedec,spi-nor"; |
||||
reg = <0>; |
||||
spi-max-frequency = <25000000>; |
||||
|
||||
partitions { |
||||
compatible = "fixed-partitions"; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
|
||||
partition@0 { |
||||
label = "u-boot"; |
||||
reg = <0x000000 0x010000>; |
||||
read-only; |
||||
}; |
||||
|
||||
mac: partition@10000 { |
||||
label = "mac"; |
||||
reg = <0x010000 0x010000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@20000 { |
||||
label = "firmware"; |
||||
reg = <0x020000 0x7c0000>; |
||||
}; |
||||
|
||||
partition@7e0000 { |
||||
label = "tplink"; |
||||
reg = <0x7e0000 0x010000>; |
||||
read-only; |
||||
}; |
||||
|
||||
art: partition@7f0000 { |
||||
label = "art"; |
||||
reg = <0x7f0000 0x010000>; |
||||
read-only; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
ð0 { |
||||
status = "okay"; |
||||
mtd-mac-address = <&mac 0x8>; |
||||
mtd-mac-address-increment = <1>; |
||||
}; |
||||
|
||||
ð1 { |
||||
status = "okay"; |
||||
mtd-mac-address = <&mac 0x8>; |
||||
}; |
||||
|
||||
&wmac { |
||||
status = "okay"; |
||||
mtd-cal-data = <&art 0x1000>; |
||||
mtd-mac-address = <&mac 0x8>; |
||||
}; |
||||
@ -0,0 +1,153 @@ |
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||
/dts-v1/; |
||||
|
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
#include "qca9561_tplink_archer-c5x.dtsi" |
||||
|
||||
/ { |
||||
compatible = "tplink,archer-c59-v1", "qca,qca9560"; |
||||
model = "TP-LINK Archer C59 v1"; |
||||
|
||||
aliases { |
||||
led-boot = &power; |
||||
led-failsafe = &power; |
||||
led-running = &power; |
||||
led-upgrade = &power; |
||||
}; |
||||
|
||||
leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
power: power { |
||||
label = "tp-link:green:power"; |
||||
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; |
||||
default-state = "on"; |
||||
}; |
||||
|
||||
wlan2g { |
||||
label = "tp-link:green:wlan2g"; |
||||
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; |
||||
linux,default-trigger = "phy1tpt"; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
wlan5g { |
||||
label = "tp-link:green:wlan5g"; |
||||
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; |
||||
linux,default-trigger = "phy0tpt"; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
wan_green { |
||||
label = "tp-link:green:wan"; |
||||
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
wan_amber { |
||||
label = "tp-link:amber:wan"; |
||||
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
lan { |
||||
label = "tp-link:green:lan"; |
||||
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
wps { |
||||
label = "tp-link:green:wps"; |
||||
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
usb { |
||||
label = "tp-link:green:usb"; |
||||
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; |
||||
default-state = "off"; |
||||
linux,default-trigger = "usbport"; |
||||
trigger-sources = <&hub_port>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&usb0 { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
status = "okay"; |
||||
|
||||
hub_port: port@1 { |
||||
reg = <1>; |
||||
#trigger-source-cells = <0>; |
||||
}; |
||||
}; |
||||
|
||||
&usb_phy0 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&spi { |
||||
status = "okay"; |
||||
num-cs = <1>; |
||||
|
||||
flash@0 { |
||||
compatible = "jedec,spi-nor"; |
||||
reg = <0>; |
||||
spi-max-frequency = <25000000>; |
||||
|
||||
partitions { |
||||
compatible = "fixed-partitions"; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
|
||||
partition@0 { |
||||
label = "u-boot"; |
||||
reg = <0x000000 0x010000>; |
||||
read-only; |
||||
}; |
||||
|
||||
mac: partition@10000 { |
||||
label = "mac"; |
||||
reg = <0x010000 0x010000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@20000 { |
||||
label = "firmware"; |
||||
reg = <0x020000 0xe30000>; |
||||
}; |
||||
|
||||
partition@e50000 { |
||||
label = "tplink"; |
||||
reg = <0xe50000 0x1a0000>; |
||||
read-only; |
||||
}; |
||||
|
||||
art: partition@ff0000 { |
||||
label = "art"; |
||||
reg = <0xff0000 0x010000>; |
||||
read-only; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
ð0 { |
||||
status = "okay"; |
||||
mtd-mac-address = <&mac 0x8>; |
||||
mtd-mac-address-increment = <1>; |
||||
}; |
||||
|
||||
ð1 { |
||||
status = "okay"; |
||||
mtd-mac-address = <&mac 0x8>; |
||||
}; |
||||
|
||||
&wmac { |
||||
status = "okay"; |
||||
mtd-cal-data = <&art 0x1000>; |
||||
mtd-mac-address = <&mac 0x8>; |
||||
}; |
||||
@ -0,0 +1,98 @@ |
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||
|
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
#include "qca956x.dtsi" |
||||
|
||||
/ { |
||||
compatible = "tplink,archer-c5x", "qca,qca9560"; |
||||
|
||||
chosen { |
||||
bootargs = "console=ttyS0,115200n8"; |
||||
}; |
||||
|
||||
led_spi { |
||||
compatible = "spi-gpio"; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
|
||||
gpio-sck = <&gpio 18 GPIO_ACTIVE_HIGH>; |
||||
gpio-mosi = <&gpio 17 GPIO_ACTIVE_HIGH>; |
||||
cs-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; |
||||
num-chipselects = <1>; |
||||
|
||||
led_gpio: led_gpio@0 { |
||||
compatible = "fairchild,74hc595"; |
||||
reg = <0>; |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
registers-number = <1>; |
||||
spi-max-frequency = <10000000>; |
||||
}; |
||||
}; |
||||
|
||||
keys { |
||||
compatible = "gpio-keys-polled"; |
||||
poll-interval = <100>; |
||||
|
||||
wps_button { |
||||
label = "WPS button"; |
||||
linux,code = <KEY_WPS_BUTTON>; |
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
wifi_button { |
||||
label = "WiFi button"; |
||||
linux,code = <KEY_RFKILL>; |
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
reset_button { |
||||
label = "Reset button"; |
||||
linux,code = <KEY_RESTART>; |
||||
gpios = <&gpio 21 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
|
||||
gpio-export { |
||||
compatible = "gpio-export"; |
||||
|
||||
gpio_shift_register_oe { |
||||
gpio-export,name = "tp-link:oe:sr"; |
||||
gpio-export,output = <0>; |
||||
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
gpio_shift_register_reset { |
||||
gpio-export,name = "tp-link:reset:sr"; |
||||
gpio-export,output = <1>; |
||||
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
}; |
||||
}; |
||||
|
||||
&uart { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&gpio { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&pcie { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
ð0 { |
||||
phy-mode = "mii"; |
||||
phy-handle = <&swphy0>; |
||||
|
||||
gmac-config { |
||||
device = <&gmac>; |
||||
|
||||
switch-phy-addr-swap = <1>; |
||||
switch-phy-swap = <1>; |
||||
}; |
||||
}; |
||||
Loading…
Reference in new issue