This adds support for the Intel Falcon SoC for GPON.
Support for the Falcon SoC was removed in commit c821836395
svn rev:
40392 from OpenWrt, this commit adds it again.
This patch adds a new subtarget for the Falcon SoC, but it still misses
all the drivers needed to control the GPON part.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
master
parent
5cdbc86329
commit
9371542783
@ -0,0 +1,110 @@ |
|||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h> |
||||||
|
#include "falcon.dtsi" |
||||||
|
#include "falcon-sflash-16M.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
model = "EASY88388 - Lantiq Falcon FTTDP8 Reference Board"; |
||||||
|
compatible = "lantiq,falcon-easy88388", "lantiq,falcon"; |
||||||
|
|
||||||
|
chosen { |
||||||
|
bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit"; |
||||||
|
}; |
||||||
|
|
||||||
|
aliases { |
||||||
|
spi0 = &ebu_cs0; |
||||||
|
}; |
||||||
|
|
||||||
|
memory@0 { |
||||||
|
device_type = "memory"; |
||||||
|
reg = <0x0 0x4000000>; // 64M at 0x0 |
||||||
|
}; |
||||||
|
|
||||||
|
gpio-keys { |
||||||
|
compatible = "gpio-keys"; |
||||||
|
reset { |
||||||
|
label = "reset"; |
||||||
|
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; |
||||||
|
linux,code = <0x198>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
pinctrl { |
||||||
|
led_pins: led-pins { |
||||||
|
lantiq,pins = "io34", "io35", "io36", "io37", "io38", |
||||||
|
"io39", "io40", "io41"; |
||||||
|
lantiq,function = "gpio"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
easy88388-leds { |
||||||
|
compatible = "gpio-leds"; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&led_pins &bootled_pins>; |
||||||
|
|
||||||
|
GPON { |
||||||
|
label = "easy88388:green:gpon"; |
||||||
|
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
TEST { |
||||||
|
label = "easy88388:green:test"; |
||||||
|
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
STATUS { |
||||||
|
label = "easy88388:green:status"; |
||||||
|
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
ERROR { |
||||||
|
label = "easy88388:red:error"; |
||||||
|
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
|
||||||
|
DSL1 { |
||||||
|
label = "easy88388:dsl:1"; |
||||||
|
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
DSL2 { |
||||||
|
label = "easy88388:dsl:2"; |
||||||
|
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
DSL3 { |
||||||
|
label = "easy88388:dsl:3"; |
||||||
|
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
DSL4 { |
||||||
|
label = "easy88388:dsl:4"; |
||||||
|
gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
DSL5 { |
||||||
|
label = "easy88388:dsl:5"; |
||||||
|
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
DSL6 { |
||||||
|
label = "easy88388:dsl:6"; |
||||||
|
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
DSL7 { |
||||||
|
label = "easy88388:dsl:7"; |
||||||
|
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
DSL8 { |
||||||
|
label = "easy88388:dsl:8"; |
||||||
|
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
|
||||||
|
}; |
||||||
|
}; |
||||||
|
|
@ -0,0 +1,84 @@ |
|||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h> |
||||||
|
#include "falcon.dtsi" |
||||||
|
#include "falcon-sflash-16M.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
model = "EASY88444 - Lantiq Falcon FTTdp G.FAST Reference Board"; |
||||||
|
compatible = "lantiq,falcon-easy88444", "lantiq,falcon"; |
||||||
|
|
||||||
|
chosen { |
||||||
|
bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit"; |
||||||
|
}; |
||||||
|
|
||||||
|
aliases { |
||||||
|
spi0 = &ebu_cs0; |
||||||
|
}; |
||||||
|
|
||||||
|
memory@0 { |
||||||
|
device_type = "memory"; |
||||||
|
reg = <0x0 0x4000000>; // 64M at 0x0 |
||||||
|
}; |
||||||
|
|
||||||
|
gpio-keys { |
||||||
|
compatible = "gpio-keys"; |
||||||
|
reset { |
||||||
|
label = "reset"; |
||||||
|
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; |
||||||
|
linux,code = <0x198>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
pinctrl { |
||||||
|
led_pins: led-pins { |
||||||
|
lantiq,pins = "io34", "io35", "io37"; |
||||||
|
lantiq,function = "gpio"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
easy88444-leds { |
||||||
|
compatible = "gpio-leds"; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&led_pins &bootled_pins>; |
||||||
|
|
||||||
|
GPON { |
||||||
|
label = "easy88444:green:gpon"; |
||||||
|
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
TEST { |
||||||
|
label = "easy88444:green:test"; |
||||||
|
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
STATUS { |
||||||
|
label = "easy88444:green:status"; |
||||||
|
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
|
||||||
|
GFAST1 { |
||||||
|
label = "easy88444:gfast:1"; |
||||||
|
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
GFAST2 { |
||||||
|
label = "easy88444:gfast:2"; |
||||||
|
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
GFAST3 { |
||||||
|
label = "easy88444:gfast:3"; |
||||||
|
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
GFAST4 { |
||||||
|
label = "easy88444:gfast:4"; |
||||||
|
gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
|
||||||
|
}; |
||||||
|
}; |
||||||
|
|
@ -0,0 +1,114 @@ |
|||||||
|
|
||||||
|
#include <dt-bindings/interrupt-controller/irq.h> |
||||||
|
#include <dt-bindings/gpio/gpio.h> |
||||||
|
|
||||||
|
/ { |
||||||
|
compatible = "lantiq,falcon-easy98000", "lantiq,falcon"; |
||||||
|
|
||||||
|
chosen { |
||||||
|
bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit"; |
||||||
|
}; |
||||||
|
|
||||||
|
memory@0 { |
||||||
|
device_type = "memory"; |
||||||
|
reg = <0x0 0x4000000>; |
||||||
|
}; |
||||||
|
|
||||||
|
easy98000-leds { |
||||||
|
compatible = "gpio-leds"; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&bootled_pins>; |
||||||
|
|
||||||
|
LED_0 { |
||||||
|
label = "easy98000:green:gpon"; |
||||||
|
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
LED_1 { |
||||||
|
label = "easy98000:red:gpon"; |
||||||
|
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
LED_2 { |
||||||
|
label = "easy98000:green:gpon_tx"; |
||||||
|
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
LED_3 { |
||||||
|
label = "easy98000:green:gpon_rx"; |
||||||
|
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
LED_4 { |
||||||
|
label = "easy98000:green:voice"; |
||||||
|
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
LED_5 { |
||||||
|
label = "easy98000:green:status"; |
||||||
|
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&ebu_cs1 { |
||||||
|
eth0: ethernet@0000000 { |
||||||
|
compatible = "davicom,dm9000"; |
||||||
|
device_type = "network"; |
||||||
|
reg = <0x0000003 0x1>, <0x0000001 0x1>; |
||||||
|
reg-names = "addr", "data"; |
||||||
|
interrupt-parent = <&gpio1>; |
||||||
|
#interrupt-cells = <2>; |
||||||
|
interrupts = <10 IRQ_TYPE_LEVEL_LOW>; |
||||||
|
local-mac-address = [ 00 00 00 00 00 00 ]; |
||||||
|
}; |
||||||
|
|
||||||
|
cpld@3c00000 { |
||||||
|
compatible = "lantiq,easy98000_addon"; |
||||||
|
reg = <0x3c00000 0x2>; |
||||||
|
}; |
||||||
|
|
||||||
|
cpld@3c0000c { |
||||||
|
compatible = "lantiq,easy98000_cpld_led"; |
||||||
|
reg = <0x3c0000c 0x2>, <0x3c00012 0x2>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
/* // enable this for second uart: |
||||||
|
&serial1 { |
||||||
|
status = "okay"; |
||||||
|
};*/ |
||||||
|
|
||||||
|
&spi { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
eeprom@1 { |
||||||
|
compatible = "atmel,at25", "atmel,at25160n"; |
||||||
|
reg = <2>; |
||||||
|
spi-max-frequency = <1000000>; |
||||||
|
spi-cpha; |
||||||
|
spi-cpol; |
||||||
|
|
||||||
|
pagesize = <32>; |
||||||
|
size = <2048>; |
||||||
|
address-width = <16>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&i2c { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
clock-frequency = <100000>; |
||||||
|
|
||||||
|
/* eeprom-emulation by OMU */ |
||||||
|
eeprom@50 { |
||||||
|
compatible = "at,24c02"; |
||||||
|
reg = <0x50>; |
||||||
|
}; |
||||||
|
eeprom@51 { |
||||||
|
compatible = "at,24c02"; |
||||||
|
reg = <0x51>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
@ -0,0 +1,40 @@ |
|||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include "falcon.dtsi" |
||||||
|
#include "EASY98000-base.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
model = "EASY98000 - Lantiq Falcon (NAND)"; |
||||||
|
compatible = "lantiq,falcon-easy98000-nand", "lantiq,falcon-easy98000", "lantiq,falcon"; |
||||||
|
|
||||||
|
aliases { |
||||||
|
spi0 = &spi; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&ebu_cs0 { |
||||||
|
gen_nand@0 { |
||||||
|
compatible = "gen_nand", "lantiq,nand-falcon"; |
||||||
|
bank-width = <1>; |
||||||
|
reg = <0x0 0x40000>; |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
linux,mtd-name = "gen_nand"; |
||||||
|
bbt-use-flash; |
||||||
|
|
||||||
|
partition@0 { |
||||||
|
label = "uboot"; |
||||||
|
reg = <0x00000 0x40000>; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@10000 { |
||||||
|
label = "uboot_env"; |
||||||
|
reg = <0x40000 0x40000>; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@20000 { |
||||||
|
label = "linux"; |
||||||
|
reg = <0x80000 0x3d0000>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
@ -0,0 +1,38 @@ |
|||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include "falcon.dtsi" |
||||||
|
#include "EASY98000-base.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
model = "EASY98000 - Lantiq Falcon (NOR)"; |
||||||
|
compatible = "lantiq,falcon-easy98000-nor", "lantiq,falcon-easy98000", "lantiq,falcon"; |
||||||
|
|
||||||
|
aliases { |
||||||
|
spi0 = &spi; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&ebu_cs0 { |
||||||
|
cfi@0 { |
||||||
|
compatible = "lantiq,nor"; |
||||||
|
bank-width = <2>; |
||||||
|
reg = <0x0 0x4000000>; |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
|
||||||
|
partition@0 { |
||||||
|
label = "uboot"; |
||||||
|
reg = <0x00000 0x40000>; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@10000 { |
||||||
|
label = "uboot_env"; |
||||||
|
reg = <0x40000 0x40000>; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@20000 { |
||||||
|
label = "linux"; |
||||||
|
reg = <0x80000 0x3d0000>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
@ -0,0 +1,16 @@ |
|||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include "falcon.dtsi" |
||||||
|
#include "EASY98000-base.dtsi" |
||||||
|
#include "falcon-sflash-16M.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
model = "EASY98000 - Lantiq Falcon (SFLASH)"; |
||||||
|
compatible = "lantiq,falcon-easy98000-sflash", "lantiq,falcon-easy98000", "lantiq,falcon"; |
||||||
|
|
||||||
|
aliases { |
||||||
|
spi0 = &ebu_cs0; |
||||||
|
spi1 = &spi; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
@ -0,0 +1,99 @@ |
|||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h> |
||||||
|
|
||||||
|
#include "falcon.dtsi" |
||||||
|
#include "falcon-sflash-16M.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
model = "EASY98020 - Lantiq Falcon Reference Board"; |
||||||
|
compatible = "lantiq,falcon-easy98020", "lantiq,falcon"; |
||||||
|
|
||||||
|
chosen { |
||||||
|
bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit"; |
||||||
|
}; |
||||||
|
|
||||||
|
aliases { |
||||||
|
spi0 = &ebu_cs0; |
||||||
|
}; |
||||||
|
|
||||||
|
memory@0 { |
||||||
|
device_type = "memory"; |
||||||
|
reg = <0x0 0x4000000>; // 64M at 0x0 |
||||||
|
}; |
||||||
|
|
||||||
|
gpio-keys { |
||||||
|
compatible = "gpio-keys"; |
||||||
|
reset { |
||||||
|
label = "reset"; |
||||||
|
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; |
||||||
|
linux,code = <0x198>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
pinctrl { |
||||||
|
led_pins: phy-led-pins { |
||||||
|
lantiq,pins = "io42", "io41", "io38", "io37"; |
||||||
|
lantiq,function = "gpio"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
easy98020-leds { |
||||||
|
compatible = "gpio-leds"; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&bootled_pins>; |
||||||
|
|
||||||
|
GPON { |
||||||
|
label = "easy98020:green:gpon"; |
||||||
|
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
TEST { |
||||||
|
label = "easy98020:green:test"; |
||||||
|
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
ETH { |
||||||
|
label = "easy98020:green:status"; |
||||||
|
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
VOICE { |
||||||
|
label = "easy98020:green:voice"; |
||||||
|
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
VIDEO { |
||||||
|
label = "easy98020:green:video"; |
||||||
|
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
easy98020-phy-leds { |
||||||
|
compatible = "gpio-leds"; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&led_pins>; |
||||||
|
|
||||||
|
GE0_ACT { |
||||||
|
label = "easy98020:ge0_act"; |
||||||
|
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
GE0_LINK { |
||||||
|
label = "easy98020:ge0_link"; |
||||||
|
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
GE1_ACT { |
||||||
|
label = "easy98020:ge1_act"; |
||||||
|
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
GE1_LINK { |
||||||
|
label = "easy98020:ge1_link"; |
||||||
|
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "off"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
@ -0,0 +1,72 @@ |
|||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h> |
||||||
|
|
||||||
|
#include "falcon.dtsi" |
||||||
|
#include "falcon-sflash-16M.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
model = "EASY98020 - Lantiq Falcon Reference Board V1.8"; |
||||||
|
compatible = "lantiq,falcon-easy98020-V18", "lantiq,falcon-easy98020", "lantiq,falcon"; |
||||||
|
|
||||||
|
chosen { |
||||||
|
bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit"; |
||||||
|
}; |
||||||
|
|
||||||
|
aliases { |
||||||
|
spi0 = &ebu_cs0; |
||||||
|
}; |
||||||
|
|
||||||
|
memory@0 { |
||||||
|
device_type = "memory"; |
||||||
|
reg = <0x0 0x4000000>; // 64M at 0x0 |
||||||
|
}; |
||||||
|
|
||||||
|
gpio-keys { |
||||||
|
compatible = "gpio-keys"; |
||||||
|
reset { |
||||||
|
label = "reset"; |
||||||
|
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; |
||||||
|
linux,code = <0x198>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
pinctrl { |
||||||
|
led_pins: led-pins { |
||||||
|
lantiq,pins = "io11", "io14", "io36", "io37", "io38"; |
||||||
|
lantiq,function = "gpio"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
easy98020-leds { |
||||||
|
compatible = "gpio-leds"; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&led_pins &bootled_pins>; |
||||||
|
|
||||||
|
GPON { |
||||||
|
label = "easy98020:green:gpon"; |
||||||
|
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
TEST { |
||||||
|
label = "easy98020:green:test"; |
||||||
|
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
ETH { |
||||||
|
label = "easy98020:green:status"; |
||||||
|
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
VOICE { |
||||||
|
label = "easy98020:green:voice"; |
||||||
|
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
VIDEO { |
||||||
|
label = "easy98020:green:video"; |
||||||
|
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
@ -0,0 +1,85 @@ |
|||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h> |
||||||
|
|
||||||
|
#include "falcon.dtsi" |
||||||
|
#include "falcon-sflash-16M.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
model = "EASY98021 - Lantiq Falcon HGU Reference Board"; |
||||||
|
compatible = "lantiq,falcon-easy98021", "lantiq,falcon-easy98020", "lantiq,falcon"; |
||||||
|
|
||||||
|
chosen { |
||||||
|
bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit"; |
||||||
|
}; |
||||||
|
|
||||||
|
aliases { |
||||||
|
spi0 = &ebu_cs0; |
||||||
|
}; |
||||||
|
|
||||||
|
memory@0 { |
||||||
|
device_type = "memory"; |
||||||
|
reg = <0x0 0x4000000>; // 64M at 0x0 |
||||||
|
}; |
||||||
|
|
||||||
|
gpio-keys { |
||||||
|
compatible = "gpio-keys"; |
||||||
|
reset { |
||||||
|
label = "reset"; |
||||||
|
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; |
||||||
|
linux,code = <0x198>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
gpio-mmc { |
||||||
|
/* Place-holder for SIM-Card connector, |
||||||
|
to list the used GPIOs, no official binding */ |
||||||
|
compatible = "gpio-mmc"; |
||||||
|
gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>, |
||||||
|
<&gpio0 3 GPIO_ACTIVE_HIGH>, |
||||||
|
<&gpio0 2 GPIO_ACTIVE_HIGH>, |
||||||
|
<0>; /* no CS */ |
||||||
|
gpio-names = "di", "do", "clk", "cs"; |
||||||
|
reset-gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>; |
||||||
|
}; |
||||||
|
|
||||||
|
pinctrl { |
||||||
|
led_pins: led-pins { |
||||||
|
lantiq,pins = "io11", "io14", "io36", "io37", "io38"; |
||||||
|
lantiq,function = "gpio"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
easy98021-leds { |
||||||
|
compatible = "gpio-leds"; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&led_pins &bootled_pins>; |
||||||
|
|
||||||
|
GPON { |
||||||
|
label = "easy98021:green:gpon"; |
||||||
|
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
TEST { |
||||||
|
label = "easy98021:red:test"; |
||||||
|
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
ETH { |
||||||
|
label = "easy98021:green:status"; |
||||||
|
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
VOICE { |
||||||
|
label = "easy98021:green:voice"; |
||||||
|
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
SIMCARD { |
||||||
|
label = "easy98021:green:simcard"; |
||||||
|
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
@ -0,0 +1,80 @@ |
|||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include "falcon.dtsi" |
||||||
|
#include "falcon-sflash-16M.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
model = "EASY98035SYNCE - Lantiq Falcon SFP Stick with SyncE"; |
||||||
|
compatible = "lantiq,falcon-easy98035synce", "lantiq,falcon-sfp", "lantiq,falcon"; |
||||||
|
|
||||||
|
chosen { |
||||||
|
bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit"; |
||||||
|
}; |
||||||
|
|
||||||
|
aliases { |
||||||
|
spi0 = &ebu_cs0; |
||||||
|
}; |
||||||
|
|
||||||
|
memory@0 { |
||||||
|
device_type = "memory"; |
||||||
|
reg = <0x0 0x4000000>; // 64M at 0x0 |
||||||
|
}; |
||||||
|
|
||||||
|
pinctrl { |
||||||
|
compatible = "lantiq,pinctrl-falcon"; |
||||||
|
|
||||||
|
asc0_func1: func1 { |
||||||
|
func1_tx { |
||||||
|
lantiq,pins = "io32"; |
||||||
|
lantiq,mux = <1>; |
||||||
|
lantiq,input = <0>; |
||||||
|
}; |
||||||
|
func1_rx { |
||||||
|
lantiq,pins = "io33"; |
||||||
|
lantiq,mux = <0>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
asc0_func2: func2 { |
||||||
|
func2_tx { |
||||||
|
lantiq,pins = "io32"; |
||||||
|
lantiq,mux = <0>; |
||||||
|
}; |
||||||
|
func2_rx { |
||||||
|
lantiq,pins = "io33"; |
||||||
|
lantiq,mux = <1>; |
||||||
|
lantiq,input = <0>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
asc0_func3: func3 { |
||||||
|
func3_tx { |
||||||
|
lantiq,pins = "io32"; |
||||||
|
lantiq,mux = <1>; |
||||||
|
lantiq,input = <0>; |
||||||
|
}; |
||||||
|
func3_rx { |
||||||
|
lantiq,pins = "io33"; |
||||||
|
lantiq,mux = <1>; |
||||||
|
lantiq,input = <0>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
pinselect-asc0 { |
||||||
|
compatible = "lantiq,pinselect-asc0"; |
||||||
|
pinctrl-names = "asc0", "func1", "func2", "func3"; |
||||||
|
pinctrl-0 = <&asc0_pins>; |
||||||
|
pinctrl-1 = <&asc0_func1>; |
||||||
|
pinctrl-2 = <&asc0_func2>; |
||||||
|
pinctrl-3 = <&asc0_func3>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&serial0 { |
||||||
|
pinctrl-names = "default"; |
||||||
|
/* use "empty" pinctrl to leave setting from u-boot enabled */ |
||||||
|
pinctrl-0 = < >; |
||||||
|
}; |
||||||
|
|
||||||
|
&i2c { |
||||||
|
status = "okay"; |
||||||
|
}; |
@ -0,0 +1,80 @@ |
|||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include "falcon.dtsi" |
||||||
|
#include "falcon-sflash-16M.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
model = "EASY98035SYNCE1588 - Lantiq Falcon SFP Stick with SyncE/1588"; |
||||||
|
compatible = "lantiq,falcon-easy98035synce1588", "lantiq,falcon-sfp", "lantiq,falcon"; |
||||||
|
|
||||||
|
chosen { |
||||||
|
bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit"; |
||||||
|
}; |
||||||
|
|
||||||
|
aliases { |
||||||
|
spi0 = &ebu_cs0; |
||||||
|
}; |
||||||
|
|
||||||
|
memory@0 { |
||||||
|
device_type = "memory"; |
||||||
|
reg = <0x0 0x4000000>; // 64M at 0x0 |
||||||
|
}; |
||||||
|
|
||||||
|
pinctrl { |
||||||
|
compatible = "lantiq,pinctrl-falcon"; |
||||||
|
|
||||||
|
asc0_func1: func1 { |
||||||
|
func1_tx { |
||||||
|
lantiq,pins = "io32"; |
||||||
|
lantiq,mux = <1>; |
||||||
|
lantiq,input = <0>; |
||||||
|
}; |
||||||
|
func1_rx { |
||||||
|
lantiq,pins = "io33"; |
||||||
|
lantiq,mux = <0>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
asc0_func2: func2 { |
||||||
|
func2_tx { |
||||||
|
lantiq,pins = "io32"; |
||||||
|
lantiq,mux = <0>; |
||||||
|
}; |
||||||
|
func2_rx { |
||||||
|
lantiq,pins = "io33"; |
||||||
|
lantiq,mux = <1>; |
||||||
|
lantiq,input = <0>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
asc0_func3: func3 { |
||||||
|
func3_tx { |
||||||
|
lantiq,pins = "io32"; |
||||||
|
lantiq,mux = <1>; |
||||||
|
lantiq,input = <0>; |
||||||
|
}; |
||||||
|
func3_rx { |
||||||
|
lantiq,pins = "io33"; |
||||||
|
lantiq,mux = <1>; |
||||||
|
lantiq,input = <0>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
pinselect-asc0 { |
||||||
|
compatible = "lantiq,pinselect-asc0"; |
||||||
|
pinctrl-names = "asc0", "func1", "func2", "func3"; |
||||||
|
pinctrl-0 = <&asc0_pins>; |
||||||
|
pinctrl-1 = <&asc0_func1>; |
||||||
|
pinctrl-2 = <&asc0_func2>; |
||||||
|
pinctrl-3 = <&asc0_func3>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&serial0 { |
||||||
|
pinctrl-names = "default"; |
||||||
|
/* use "empty" pinctrl to leave setting from u-boot enabled */ |
||||||
|
pinctrl-0 = < >; |
||||||
|
}; |
||||||
|
|
||||||
|
&i2c { |
||||||
|
status = "okay"; |
||||||
|
}; |
@ -0,0 +1,57 @@ |
|||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h> |
||||||
|
|
||||||
|
#include "falcon.dtsi" |
||||||
|
#include "falcon-sflash-16M.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
model = "MDU - Lantiq Falcon / Vinax MDU Board"; |
||||||
|
compatible = "lantiq,falcon-mdu", "lantiq,falcon"; |
||||||
|
|
||||||
|
chosen { |
||||||
|
bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit"; |
||||||
|
}; |
||||||
|
|
||||||
|
aliases { |
||||||
|
spi0 = &ebu_cs0; |
||||||
|
}; |
||||||
|
|
||||||
|
memory@0 { |
||||||
|
device_type = "memory"; |
||||||
|
reg = <0x0 0x4000000>; // 64M at 0x0 |
||||||
|
}; |
||||||
|
|
||||||
|
mdu-leds { |
||||||
|
compatible = "gpio-leds"; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&bootled_pins>; |
||||||
|
|
||||||
|
LED_0 { |
||||||
|
label = "mdu:green:gpon"; |
||||||
|
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
LED_1 { |
||||||
|
label = "mdu:green:status"; |
||||||
|
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
LED_2 { |
||||||
|
label = "mdu:green:2"; |
||||||
|
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
LED_3 { |
||||||
|
label = "mdu:green:3"; |
||||||
|
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
LED_4 { |
||||||
|
label = "mdu:green:4"; |
||||||
|
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; |
||||||
|
default-state = "keep"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
@ -0,0 +1,80 @@ |
|||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include "falcon.dtsi" |
||||||
|
#include "falcon-sflash-16M.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
model = "SFP - Lantiq Falcon SFP Stick"; |
||||||
|
compatible = "lantiq,falcon-sfp", "lantiq,falcon"; |
||||||
|
|
||||||
|
chosen { |
||||||
|
bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit"; |
||||||
|
}; |
||||||
|
|
||||||
|
aliases { |
||||||
|
spi0 = &ebu_cs0; |
||||||
|
}; |
||||||
|
|
||||||
|
memory@0 { |
||||||
|
device_type = "memory"; |
||||||
|
reg = <0x0 0x4000000>; // 64M at 0x0 |
||||||
|
}; |
||||||
|
|
||||||
|
pinctrl { |
||||||
|
compatible = "lantiq,pinctrl-falcon"; |
||||||
|
|
||||||
|
asc0_func1: func1 { |
||||||
|
func1_tx { |
||||||
|
lantiq,pins = "io32"; |
||||||
|
lantiq,mux = <1>; |
||||||
|
lantiq,output = <0>; |
||||||
|
}; |
||||||
|
func1_rx { |
||||||
|
lantiq,pins = "io33"; |
||||||
|
lantiq,mux = <0>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
asc0_func2: func2 { |
||||||
|
func2_tx { |
||||||
|
lantiq,pins = "io32"; |
||||||
|
lantiq,mux = <0>; |
||||||
|
}; |
||||||
|
func2_rx { |
||||||
|
lantiq,pins = "io33"; |
||||||
|
lantiq,mux = <1>; |
||||||
|
lantiq,input = <0>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
asc0_func3: func3 { |
||||||
|
func3_tx { |
||||||
|
lantiq,pins = "io32"; |
||||||
|
lantiq,mux = <1>; |
||||||
|
lantiq,output = <0>; |
||||||
|
}; |
||||||
|
func3_rx { |
||||||
|
lantiq,pins = "io33"; |
||||||
|
lantiq,mux = <1>; |
||||||
|
lantiq,input = <0>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
pinselect-asc0 { |
||||||
|
compatible = "lantiq,pinselect-asc0"; |
||||||
|
pinctrl-names = "asc0", "func1", "func2", "func3"; |
||||||
|
pinctrl-0 = <&asc0_pins>; |
||||||
|
pinctrl-1 = <&asc0_func1>; |
||||||
|
pinctrl-2 = <&asc0_func2>; |
||||||
|
pinctrl-3 = <&asc0_func3>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&serial0 { |
||||||
|
pinctrl-names = "default"; |
||||||
|
/* use "empty" pinctrl to leave setting from u-boot enabled */ |
||||||
|
pinctrl-0 = < >; |
||||||
|
}; |
||||||
|
|
||||||
|
&i2c { |
||||||
|
status = "okay"; |
||||||
|
}; |
@ -0,0 +1,37 @@ |
|||||||
|
|
||||||
|
&ebu_cs0 { |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
compatible = "lantiq,sflash-falcon", "simple-bus"; |
||||||
|
|
||||||
|
flash@0 { |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
compatible = "spansion,s25fl129p0", "spansion,s25fl129p1"; |
||||||
|
reg = <0 0>; |
||||||
|
linux,mtd-name = "sflash"; |
||||||
|
spi-max-frequency = <80000000>; |
||||||
|
m25p,fast-read; |
||||||
|
|
||||||
|
partition@0 { |
||||||
|
reg = <0x0 0x40000>; |
||||||
|
label = "uboot"; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@40000 { |
||||||
|
reg = <0x40000 0x80000>; |
||||||
|
label = "uboot_env"; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@C0000 { |
||||||
|
reg = <0xC0000 0x740000>; |
||||||
|
label = "image0"; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@800000 { |
||||||
|
reg = <0x800000 0x800000>; |
||||||
|
label = "image1"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
@ -0,0 +1,388 @@ |
|||||||
|
/ { |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
compatible = "lantiq,falcon"; |
||||||
|
|
||||||
|
cpus { |
||||||
|
cpu@0 { |
||||||
|
compatible = "mips,mips34kc"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
aliases { |
||||||
|
serial0 = &serial0; |
||||||
|
serial1 = &serial1; |
||||||
|
gpio0 = &gpio0; |
||||||
|
gpio1 = &gpio1; |
||||||
|
gpio2 = &gpio2; |
||||||
|
gpio3 = &gpio3; |
||||||
|
gpio4 = &gpio4; |
||||||
|
}; |
||||||
|
|
||||||
|
clocks { |
||||||
|
compatible = "simple-bus"; |
||||||
|
|
||||||
|
cpu_clk: cpu { |
||||||
|
compatible = "fixed-clock"; |
||||||
|
#clock-cells = <0>; |
||||||
|
clock-frequency = <400000000>; |
||||||
|
clock-output-names = "cpu"; |
||||||
|
}; |
||||||
|
|
||||||
|
io_clk: io { |
||||||
|
compatible = "fixed-clock"; |
||||||
|
#clock-cells = <0>; |
||||||
|
clock-frequency = <200000000>; |
||||||
|
clock-output-names = "io"; |
||||||
|
}; |
||||||
|
|
||||||
|
fpi_clk: fpi { |
||||||
|
compatible = "fixed-clock"; |
||||||
|
#clock-cells = <0>; |
||||||
|
clock-frequency = <100000000>; |
||||||
|
clock-output-names = "fpi"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
ebu_cs0: localbus@10000000 { |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
compatible = "lantiq,localbus", "simple-bus"; |
||||||
|
reg = <0x10000000 0x4000000>; |
||||||
|
ranges = <0x0 0x10000000 0x4000000>; |
||||||
|
}; |
||||||
|
ebu_cs1: localbus@14000000 { |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
compatible = "lantiq,localbus", "simple-bus"; |
||||||
|
reg = <0x14000000 0x4000000>; |
||||||
|
ranges = <0x0 0x14000000 0x4000000>; |
||||||
|
}; |
||||||
|
|
||||||
|
ebu@18000000 { |
||||||
|
compatible = "lantiq,ebu-falcon"; |
||||||
|
reg = <0x18000000 0x100>; |
||||||
|
}; |
||||||
|
|
||||||
|
sbs2@1D000000 { |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
compatible = "lantiq,sysb2", "simple-bus"; |
||||||
|
reg = <0x1D000000 0x1000000>; |
||||||
|
ranges = <0x0 0x1D000000 0x1000000>; |
||||||
|
|
||||||
|
clock_sysgpe: clock-controller@700000 { |
||||||
|
compatible = "lantiq,sysgpe-falcon"; |
||||||
|
reg = <0x700000 0x100>; |
||||||
|
#clock-cells = <1>; |
||||||
|
}; |
||||||
|
|
||||||
|
mps@4000 { |
||||||
|
compatible = "lantiq,mps-falcon", "lantiq,mps-xrx100"; |
||||||
|
reg = <0x4000 0x1000>; |
||||||
|
interrupt-parent = <&icu0>; |
||||||
|
interrupts = <154 155>; |
||||||
|
lantiq,mbx = <&mpsmbx>; |
||||||
|
}; |
||||||
|
|
||||||
|
gpio0: gpio@810000 { |
||||||
|
compatible = "lantiq,falcon-gpio"; |
||||||
|
gpio-controller; |
||||||
|
#gpio-cells = <2>; |
||||||
|
interrupt-controller; |
||||||
|
#interrupt-cells = <2>; |
||||||
|
interrupt-parent = <&icu0>; |
||||||
|
interrupts = <44>; |
||||||
|
reg = <0x810000 0x80>; |
||||||
|
clocks = <&clock_syseth 16>; |
||||||
|
}; |
||||||
|
|
||||||
|
gpio2: gpio@810100 { |
||||||
|
compatible = "lantiq,falcon-gpio"; |
||||||
|
gpio-controller; |
||||||
|
#gpio-cells = <2>; |
||||||
|
interrupt-controller; |
||||||
|
#interrupt-cells = <2>; |
||||||
|
interrupt-parent = <&icu0>; |
||||||
|
interrupts = <46>; |
||||||
|
reg = <0x810100 0x80>; |
||||||
|
clocks = <&clock_syseth 17>; |
||||||
|
}; |
||||||
|
|
||||||
|
clock_syseth: clock-controller@B00000 { |
||||||
|
compatible = "lantiq,syseth-falcon"; |
||||||
|
reg = <0xB00000 0x100>; |
||||||
|
#clock-cells = <1>; |
||||||
|
}; |
||||||
|
|
||||||
|
pad@B01000 { |
||||||
|
compatible = "lantiq,pad-falcon"; |
||||||
|
reg = <0xB01000 0x100>; |
||||||
|
lantiq,bank = <0>; |
||||||
|
clocks = <&clock_syseth 20>; |
||||||
|
}; |
||||||
|
|
||||||
|
pad@B02000 { |
||||||
|
compatible = "lantiq,pad-falcon"; |
||||||
|
reg = <0xB02000 0x100>; |
||||||
|
lantiq,bank = <2>; |
||||||
|
clocks = <&clock_syseth 21>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
fpi@1E000000 { |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
compatible = "lantiq,fpi", "simple-bus"; |
||||||
|
reg = <0x1E000000 0x1000000>; |
||||||
|
ranges = <0x0 0x1E000000 0x1000000>; |
||||||
|
|
||||||
|
serial1: serial@100B00 { |
||||||
|
status = "disabled"; |
||||||
|
compatible = "lantiq,asc"; |
||||||
|
reg = <0x100B00 0x100>; |
||||||
|
interrupt-parent = <&icu0>; |
||||||
|
interrupts = <112 113 114>; |
||||||
|
line = <1>; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&asc1_pins>; |
||||||
|
clocks = <&clock_sys1 11>; |
||||||
|
}; |
||||||
|
|
||||||
|
serial0: serial@100C00 { |
||||||
|
compatible = "lantiq,asc"; |
||||||
|
reg = <0x100C00 0x100>; |
||||||
|
interrupt-parent = <&icu0>; |
||||||
|
interrupts = <104 105 106>; |
||||||
|
line = <0>; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&asc0_pins>; |
||||||
|
clocks = <&clock_sys1 12>; |
||||||
|
}; |
||||||
|
|
||||||
|
spi: spi@100D00 { |
||||||
|
status = "disabled"; |
||||||
|
compatible = "intel,falcon-spi", "intel,xrx100-spi", "lantiq,spi-lantiq-ssc"; |
||||||
|
interrupts = <22 23 24 25>; |
||||||
|
interrupt-names = "spi_tx", "spi_rx", "spi_err", "spi_frm"; |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <0>; |
||||||
|
reg = <0x100D00 0x100>; |
||||||
|
interrupt-parent = <&icu0>; |
||||||
|
clocks = <&clock_sys1 13>; |
||||||
|
base_cs = <1>; |
||||||
|
num_cs = <2>; |
||||||
|
}; |
||||||
|
|
||||||
|
gptc@100E00 { |
||||||
|
compatible = "lantiq,gptc-falcon"; |
||||||
|
reg = <0x100E00 0x100>; |
||||||
|
}; |
||||||
|
|
||||||
|
i2c: i2c@200000 { |
||||||
|
status = "disabled"; |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <0>; |
||||||
|
compatible = "lantiq,lantiq-i2c"; |
||||||
|
reg = <0x200000 0x10000>; |
||||||
|
interrupt-parent = <&icu0>; |
||||||
|
interrupts = <18 19 20 21>; |
||||||
|
gpios = <&gpio1 7 0 &gpio1 8 0>; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&i2c_pins>; |
||||||
|
clocks = <&clock_sys1 14>; |
||||||
|
}; |
||||||
|
|
||||||
|
gpio1: gpio@800100 { |
||||||
|
compatible = "lantiq,falcon-gpio"; |
||||||
|
gpio-controller; |
||||||
|
#gpio-cells = <2>; |
||||||
|
interrupt-controller; |
||||||
|
#interrupt-cells = <2>; |
||||||
|
interrupt-parent = <&icu0>; |
||||||
|
interrupts = <45>; |
||||||
|
reg = <0x800100 0x100>; |
||||||
|
clocks = <&clock_sys1 16>; |
||||||
|
}; |
||||||
|
|
||||||
|
gpio3: gpio@800200 { |
||||||
|
compatible = "lantiq,falcon-gpio"; |
||||||
|
gpio-controller; |
||||||
|
#gpio-cells = <2>; |
||||||
|
interrupt-controller; |
||||||
|
#interrupt-cells = <2>; |
||||||
|
interrupt-parent = <&icu0>; |
||||||
|
interrupts = <47>; |
||||||
|
reg = <0x800200 0x100>; |
||||||
|
clocks = <&clock_sys1 17>; |
||||||
|
}; |
||||||
|
|
||||||
|
gpio4: gpio@800300 { |
||||||
|
compatible = "lantiq,falcon-gpio"; |
||||||
|
gpio-controller; |
||||||
|
#gpio-cells = <2>; |
||||||
|
interrupt-controller; |
||||||
|
#interrupt-cells = <2>; |
||||||
|
interrupt-parent = <&icu0>; |
||||||
|
interrupts = <48>; |
||||||
|
reg = <0x800300 0x100>; |
||||||
|
clocks = <&clock_sys1 18>; |
||||||
|
}; |
||||||
|
|
||||||
|
pad@800400 { |
||||||
|
compatible = "lantiq,pad-falcon"; |
||||||
|
reg = <0x800400 0x100>; |
||||||
|
lantiq,bank = <1>; |
||||||
|
clocks = <&clock_sys1 20>; |
||||||
|
}; |
||||||
|
|
||||||
|
pad@800500 { |
||||||
|
compatible = "lantiq,pad-falcon"; |
||||||
|
reg = <0x800500 0x100>; |
||||||
|
lantiq,bank = <3>; |
||||||
|
clocks = <&clock_sys1 21>; |
||||||
|
}; |
||||||
|
|
||||||
|
pad@800600 { |
||||||
|
compatible = "lantiq,pad-falcon"; |
||||||
|
reg = <0x800600 0x100>; |
||||||
|
lantiq,bank = <4>; |
||||||
|
clocks = <&clock_sys1 22>; |
||||||
|
}; |
||||||
|
|
||||||
|
status@802000 { |
||||||
|
compatible = "lantiq,status-falcon"; |
||||||
|
reg = <0x802000 0x80>; |
||||||
|
}; |
||||||
|
|
||||||
|
clock_sys1: clock-controller@F00000 { |
||||||
|
compatible = "lantiq,sys1-falcon"; |
||||||
|
reg = <0xF00000 0x100>; |
||||||
|
#clock-cells = <1>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
sbs0@1F000000 { |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
compatible = "simple-bus"; |
||||||
|
reg = <0x1F000000 0x400000>; |
||||||
|
ranges = <0x0 0x1F000000 0x400000>; |
||||||
|
|
||||||
|
mpsmbx: mpsmbx@200000 { |
||||||
|
reg = <0x200000 0x200>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
sbs1@1F700000 { |
||||||
|
|
||||||
|
}; |
||||||
|
|
||||||
|
biu@1F800000 { |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
compatible = "lantiq,biu", "simple-bus"; |
||||||
|
reg = <0x1F800000 0x800000>; |
||||||
|
ranges = <0x0 0x1F800000 0x800000>; |
||||||
|
|
||||||
|
icu0: icu@80200 { |
||||||
|
#interrupt-cells = <1>; |
||||||
|
interrupt-controller; |
||||||
|
compatible = "lantiq,icu"; |
||||||
|
reg = <0x80200 0x28 |
||||||
|
0x80228 0x28 |
||||||
|
0x80250 0x28 |
||||||
|
0x80278 0x28 |
||||||
|
0x802a0 0x28>; |
||||||
|
}; |
||||||
|
|
||||||
|
watchdog@803F0 { |
||||||
|
compatible = "lantiq,wdt"; |
||||||
|
reg = <0x803F0 0x10>; |
||||||
|
clocks = <&io_clk>; /* currently no effect */ |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
pinctrl { |
||||||
|
compatible = "lantiq,pinctrl-falcon"; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&state_default>; |
||||||
|
|
||||||
|
state_default: pinctrl0 { |
||||||
|
/*ntr { |
||||||
|
lantiq,groups = "ntr8k"; |
||||||
|
lantiq,function = "ntr"; |
||||||
|
};*/ |
||||||
|
hrst { |
||||||
|
lantiq,groups = "hrst"; |
||||||
|
lantiq,function = "rst"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
asc0_pins: asc0 { |
||||||
|
asc0 { |
||||||
|
lantiq,groups = "asc0"; |
||||||
|
lantiq,function = "asc"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
asc1_pins: asc1 { |
||||||
|
asc1 { |
||||||
|
lantiq,groups = "asc1"; |
||||||
|
lantiq,function = "asc"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
i2c_pins: i2c { |
||||||
|
i2c { |
||||||
|
lantiq,groups = "i2c"; |
||||||
|
lantiq,function = "i2c"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
bootled_pins: bootled { |
||||||
|
bootled { |
||||||
|
lantiq,groups = "bootled"; |
||||||
|
lantiq,function = "led"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
ntr_ntr8k: ntr8k { |
||||||
|
ntr8k { |
||||||
|
lantiq,groups = "ntr8k"; |
||||||
|
lantiq,function = "ntr"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
ntr_pps: pps { |
||||||
|
pps { |
||||||
|
lantiq,groups = "pps"; |
||||||
|
lantiq,function = "ntr"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
ntr_gpio: gpio { |
||||||
|
gpio { |
||||||
|
lantiq,pins = "io5"; |
||||||
|
lantiq,mux = <1>; |
||||||
|
lantiq,output = <0>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
slic_pins: slic { |
||||||
|
slic { |
||||||
|
lantiq,groups = "slic"; |
||||||
|
lantiq,function = "slic"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
pinselect-ntr { |
||||||
|
compatible = "lantiq,onu-ntr","lantiq,pinselect-ntr"; |
||||||
|
pinctrl-names = "ntr8k", "pps", "gpio"; |
||||||
|
pinctrl-0 = <&ntr_ntr8k>; |
||||||
|
pinctrl-1 = <&ntr_pps>; |
||||||
|
pinctrl-2 = <&ntr_gpio>; |
||||||
|
}; |
||||||
|
|
||||||
|
pinselect-asc1 { |
||||||
|
compatible = "lantiq,onu-asc1","lantiq,pinselect-asc1"; |
||||||
|
pinctrl-names = "default", "asc1"; |
||||||
|
pinctrl-0 = <&slic_pins>; |
||||||
|
pinctrl-1 = <&asc1_pins>; |
||||||
|
}; |
||||||
|
|
||||||
|
}; |
@ -0,0 +1,10 @@ |
|||||||
|
CONFIG_MTD_NAND=y |
||||||
|
CONFIG_MTD_NAND_ECC=y |
||||||
|
CONFIG_MTD_SPLIT_FIRMWARE_NAME="linux" |
||||||
|
CONFIG_PINCTRL_FALCON=y |
||||||
|
# CONFIG_PSB6970_PHY is not set |
||||||
|
# CONFIG_RTL8366_SMI is not set |
||||||
|
CONFIG_SOC_FALCON=y |
||||||
|
# CONFIG_SOC_TYPE_XWAY is not set |
||||||
|
# CONFIG_SOC_XWAY is not set |
||||||
|
CONFIG_SPI_FALCON=y |
@ -0,0 +1,9 @@ |
|||||||
|
define Profile/Default |
||||||
|
NAME:=Default Profile
|
||||||
|
PRIORITY:=1
|
||||||
|
endef |
||||||
|
|
||||||
|
define Profile/Default/Description |
||||||
|
Default package set compatible with most boards.
|
||||||
|
endef |
||||||
|
$(eval $(call Profile,Default)) |
@ -0,0 +1,13 @@ |
|||||||
|
ARCH:=mips
|
||||||
|
SUBTARGET:=falcon
|
||||||
|
BOARDNAME:=Falcon
|
||||||
|
FEATURES:=squashfs mips16 nand
|
||||||
|
CPU_TYPE:=24kc
|
||||||
|
|
||||||
|
DEFAULT_PACKAGES+= kmod-leds-gpio \
|
||||||
|
kmod-gpio-button-hotplug \
|
||||||
|
kmod-ledtrig-heartbeat
|
||||||
|
|
||||||
|
define Target/Description |
||||||
|
Lantiq Falcon
|
||||||
|
endef |
Loading…
Reference in new issue