lantiq: use the etop driver DT bindings only

Use the generic mtd-mac-address dts property to get a mac address from
flash instead of the lantiq specific one.

Signed-off-by: Mathias Kresin <dev@kresin.me>
master
Mathias Kresin 8 years ago committed by John Crispin
parent 1b7d6583a5
commit 91d5067091
  1. 6
      target/linux/lantiq/dts/ARV4518PWR01.dtsi
  2. 8
      target/linux/lantiq/dts/ARV4519PW.dts
  3. 8
      target/linux/lantiq/dts/ARV4520PW.dts
  4. 6
      target/linux/lantiq/dts/ARV4525PW.dts
  5. 6
      target/linux/lantiq/dts/ARV452CQW.dts
  6. 8
      target/linux/lantiq/dts/ARV7506PW11.dts
  7. 10
      target/linux/lantiq/dts/ARV7510PW22.dts
  8. 6
      target/linux/lantiq/dts/ARV7518PW.dts
  9. 8
      target/linux/lantiq/dts/ARV7519PW.dts
  10. 8
      target/linux/lantiq/dts/ARV7525PW.dts
  11. 8
      target/linux/lantiq/dts/ARV752DPW.dts
  12. 8
      target/linux/lantiq/dts/ARV752DPW22.dts
  13. 6
      target/linux/lantiq/dts/ARV8539PW22.dts
  14. 10
      target/linux/lantiq/dts/WBMR.dts

@ -76,11 +76,6 @@
lantiq,shadow = <0x0>;
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0x3f0016 0x6>;
};
ath5k_eep {
compatible = "ath5k,eeprom";
ath,eep-flash = <&boardconfig 0x400>;
@ -117,6 +112,7 @@
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
ifxhcd@E101000 {

@ -61,7 +61,7 @@
reg = <0x20000 0x3d0000>;
};
partition@3f0000 {
boardconfig: partition@3f0000 {
label = "boardconfig";
reg = <0x3f0000 0x10000>;
read-only;
@ -78,11 +78,6 @@
gpio-controller;
lantiq,shadow = <0x400>;
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0x3f0016 0x6>;
};
};
gpio: pinmux@E100B10 {
@ -99,6 +94,7 @@
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
ifxhcd@E101000 {

@ -63,7 +63,7 @@
reg = <0x30000 0x3c0000>;
};
partition@7f0000 {
boardconfig: partition@7f0000 {
label = "boardconfig";
reg = <0x3f0000 0x10000>;
read-only;
@ -71,11 +71,6 @@
};
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0x3f0016 0x6>;
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10 >;
@ -118,6 +113,7 @@
etop@E180000 {
phy-mode = "rmii";
mtd-mac-address = <&boardconfig 0x16>;
};
ifxhcd@E101000 {

@ -67,11 +67,6 @@
};
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0x3f0016 0x6>;
};
ath5k_eep {
compatible = "ath5k,eeprom";
ath,eep-flash = <&boardconfig 0x400>;
@ -111,6 +106,7 @@
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {

@ -70,11 +70,6 @@
};
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0x3f0016 0x6>;
};
ath5k_eep {
compatible = "ath5k,eeprom";
ath,eep-flash = <&boardconfig 0x400>;
@ -132,6 +127,7 @@
etop@E180000 {
phy-mode = "rmii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {

@ -50,18 +50,13 @@
reg = <0x50000 0x7a0000>;
};
partition@7f0000 {
boardconfig: partition@7f0000 {
label = "board_config";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0x7f0016 0x6>;
};
};
gpio: pinmux@E100B10 {
@ -85,6 +80,7 @@
/* GPIO 19: switch reset */
etop@E180000 {
phy-mode = "rmii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {

@ -60,18 +60,13 @@
reg = <0x60000 0xf80000>;
};
partition@fe0000 {
boardconfig: partition@fe0000 {
label = "board_config";
reg = <0xfe0000 0x20000>;
read-only;
};
};
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0xfe0016 0x6>;
};
};
gpio: pinmux@E100B10 {
@ -121,8 +116,9 @@
};
etop@E180000 {
phy-mode = "mii";
/* Switch reset 19 */
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {

@ -78,11 +78,6 @@
lantiq,shadow = <0x0>;
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0x7f0016 0x6>;
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&boardconfig 0x400>;
@ -135,6 +130,7 @@
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
ifxhcd@E101000 {

@ -59,18 +59,13 @@
reg = <0x60000 0xf80000>;
};
partition@fe0000 {
boardconfig: partition@fe0000 {
label = "board_config";
reg = <0xfe0000 0x20000>;
read-only;
};
};
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0xfe0016 0x6>;
};
};
gpio: pinmux@E100B10 {
@ -110,6 +105,7 @@
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
/* warning: passive port

@ -61,7 +61,7 @@
reg = <0x20000 0x3d0000>;
};
partition@400000 {
boardconfig: partition@400000 {
label = "board_config";
reg = <0x3f0000 0x10000>;
read-only;
@ -69,11 +69,6 @@
};
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0x3f0016 0x6>;
};
ralink_eep {
compatible = "ralink,eeprom";
ralink,eeprom = "RT2860.eeprom";
@ -99,6 +94,7 @@
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {

@ -60,7 +60,7 @@
reg = <0x20000 0x7d0000>;
};
partition@7f0000 {
boardconfig: partition@7f0000 {
label = "board_config";
reg = <0x7f0000 0x10000>;
read-only;
@ -68,11 +68,6 @@
};
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0x7f0016 0x6>;
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10 >;
@ -137,6 +132,7 @@
etop@E180000 {
phy-mode = "rmii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {

@ -60,7 +60,7 @@
reg = <0x40000 0x7b0000>;
};
partition@7f0000 {
boardconfig: partition@7f0000 {
label = "board_config";
reg = <0x7f0000 0x10000>;
read-only;
@ -68,11 +68,6 @@
};
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0x7f0016 0x6>;
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10 >;
@ -136,6 +131,7 @@
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {

@ -67,11 +67,6 @@
};
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0x7f0016 0x6>;
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&art 0x400>;
@ -114,6 +109,7 @@
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&art 0x16>;
};
pci@E105400 {

@ -55,24 +55,19 @@
reg = <0x60000 0x1f20000>;
};
partition@0x1fc0000 {
boardconfig: partition@1fc0000 {
label = "board";
reg = <0x1fc0000 0x20000>;
read-only;
};
partition@0x1fe0000 {
partition@1fe0000 {
label = "calibration";
reg = <0x1fe0000 0x20000>;
read-only;
};
};
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0x1fd0024 0x6>;
};
};
gpio: pinmux@E100B10 {
@ -101,6 +96,7 @@
etop@E180000 {
phy-mode = "rgmii";
mtd-mac-address = <&boardconfig 0x10024>;
};
ifxhcd@E101000 {

Loading…
Cancel
Save