lantiq: use the etop driver DT bindings only

Use the generic mtd-mac-address dts property to get a mac address from
flash instead of the lantiq specific one.

Signed-off-by: Mathias Kresin <dev@kresin.me>

target/linux/lantiq/dts/ARV4518PWR01.dtsi

@@ -76,11 +76,6 @@
 				lantiq,shadow = <0x0>;
 			};
 
-			mac_addr {
-				compatible = "lantiq,eth-mac";
-				reg = <0 0x3f0016 0x6>;
-			};
-
 			ath5k_eep {
 				compatible = "ath5k,eeprom";
 				ath,eep-flash = <&boardconfig 0x400>;
@@ -117,6 +112,7 @@
 
 		etop@E180000 {
 			phy-mode = "mii";
+			mtd-mac-address = <&boardconfig 0x16>;
 		};
 
 		ifxhcd@E101000 {

target/linux/lantiq/dts/ARV4519PW.dts

@@ -61,7 +61,7 @@
 						reg = <0x20000 0x3d0000>;
 					};
 
-					partition@3f0000 {
+					boardconfig: partition@3f0000 {
 						label = "boardconfig";
 						reg = <0x3f0000 0x10000>;
 						read-only;
@@ -78,11 +78,6 @@
 				gpio-controller;
 				lantiq,shadow = <0x400>;
 			};
-
-			mac_addr {
-				compatible = "lantiq,eth-mac";
-				reg = <0 0x3f0016 0x6>;
-			};
 		};
 
 		gpio: pinmux@E100B10 {
@@ -99,6 +94,7 @@
 
 		etop@E180000 {
 			phy-mode = "mii";
+			mtd-mac-address = <&boardconfig 0x16>;
 		};
 
 		ifxhcd@E101000 {

target/linux/lantiq/dts/ARV4520PW.dts

@@ -63,7 +63,7 @@
 						reg = <0x30000 0x3c0000>;
 					};
 
-					partition@7f0000 {
+					boardconfig: partition@7f0000 {
 						label = "boardconfig";
 						reg = <0x3f0000 0x10000>;
 						read-only;
@@ -71,11 +71,6 @@
 				};
 			};
 
-			mac_addr {
-				compatible = "lantiq,eth-mac";
-				reg = <0 0x3f0016 0x6>;
-			};
-
 			gpiomm: gpiomm@4000000 {
 				compatible = "lantiq,gpio-mm";
 				reg = <1 0x0 0x10 >;
@@ -118,6 +113,7 @@
 
 		etop@E180000 {
 			phy-mode = "rmii";
+			mtd-mac-address = <&boardconfig 0x16>;
 		};
 
 		ifxhcd@E101000 {

target/linux/lantiq/dts/ARV4525PW.dts

@@ -67,11 +67,6 @@
 				};
 			};
 
-			mac_addr {
-				compatible = "lantiq,eth-mac";
-				reg = <0 0x3f0016 0x6>;
-			};
-
 			ath5k_eep {
 				compatible = "ath5k,eeprom";
 				ath,eep-flash = <&boardconfig 0x400>;
@@ -111,6 +106,7 @@
 
 		etop@E180000 {
 			phy-mode = "mii";
+			mtd-mac-address = <&boardconfig 0x16>;
 		};
 
 		pci@E105400 {

target/linux/lantiq/dts/ARV452CQW.dts

@@ -70,11 +70,6 @@
 				};
 			};
 
-			mac_addr {
-				compatible = "lantiq,eth-mac";
-				reg = <0 0x3f0016 0x6>;
-			};
-
 			ath5k_eep {
 				compatible = "ath5k,eeprom";
 				ath,eep-flash = <&boardconfig 0x400>;
@@ -132,6 +127,7 @@
 
 		etop@E180000 {
 			phy-mode = "rmii";
+			mtd-mac-address = <&boardconfig 0x16>;
 		};
 
 		pci@E105400 {

target/linux/lantiq/dts/ARV7506PW11.dts

@@ -50,18 +50,13 @@
 						reg = <0x50000 0x7a0000>;
 					};
 
-					partition@7f0000 {
+					boardconfig: partition@7f0000 {
 						label = "board_config";
 						reg = <0x7f0000 0x10000>;
 						read-only;
 					};
 				};
 			};
-
-			mac_addr {
-				compatible = "lantiq,eth-mac";
-				reg = <0 0x7f0016 0x6>;
-			};
 		};
 
 		gpio: pinmux@E100B10 {
@@ -85,6 +80,7 @@
 		/* GPIO 19: switch reset */
 		etop@E180000 {
 			phy-mode = "rmii";
+			mtd-mac-address = <&boardconfig 0x16>;
 		};
 
 		pci@E105400 {

target/linux/lantiq/dts/ARV7510PW22.dts

@@ -60,18 +60,13 @@
 						reg = <0x60000 0xf80000>;
 					};
 
-					partition@fe0000 {
+					boardconfig: partition@fe0000 {
 						label = "board_config";
 						reg = <0xfe0000 0x20000>;
 						read-only;
 					};
 				};
 			};
-
-			mac_addr {
-				compatible = "lantiq,eth-mac";
-				reg = <0 0xfe0016 0x6>;
-			};
 		};
 
 		gpio: pinmux@E100B10 {
@@ -121,8 +116,9 @@
 		};
 
 		etop@E180000 {
-			phy-mode = "mii";
 			/* Switch reset 19 */
+			phy-mode = "mii";
+			mtd-mac-address = <&boardconfig 0x16>;
 		};
 
 		pci@E105400 {

target/linux/lantiq/dts/ARV7518PW.dts

@@ -78,11 +78,6 @@
 				lantiq,shadow = <0x0>;
 			};
 
-			mac_addr {
-				compatible = "lantiq,eth-mac";
-				reg = <0 0x7f0016 0x6>;
-			};
-
 			ath9k_eep {
 				compatible = "ath9k,eeprom";
 				ath,eep-flash = <&boardconfig 0x400>;
@@ -135,6 +130,7 @@
 
 		etop@E180000 {
 			phy-mode = "mii";
+			mtd-mac-address = <&boardconfig 0x16>;
 		};
 
 		ifxhcd@E101000 {

target/linux/lantiq/dts/ARV7519PW.dts

@@ -59,18 +59,13 @@
 						reg = <0x60000 0xf80000>;
 					};
 
-					partition@fe0000 {
+					boardconfig: partition@fe0000 {
 						label = "board_config";
 						reg = <0xfe0000 0x20000>;
 						read-only;
 					};
 				};
 			};
-
-			mac_addr {
-				compatible = "lantiq,eth-mac";
-				reg = <0 0xfe0016 0x6>;
-			};
 		};
 
 		gpio: pinmux@E100B10 {
@@ -110,6 +105,7 @@
 
 		etop@E180000 {
 			phy-mode = "mii";
+			mtd-mac-address = <&boardconfig 0x16>;
 		};
 
 		/* warning: passive port

target/linux/lantiq/dts/ARV7525PW.dts

@@ -61,7 +61,7 @@
 						reg = <0x20000 0x3d0000>;
 					};
 
-					partition@400000 {
+					boardconfig: partition@400000 {
 						label = "board_config";
 						reg = <0x3f0000 0x10000>;
 						read-only;
@@ -69,11 +69,6 @@
 				};
 			};
 
-			mac_addr {
-				compatible = "lantiq,eth-mac";
-				reg = <0 0x3f0016 0x6>;
-			};
-
 			ralink_eep {
 				compatible = "ralink,eeprom";
 				ralink,eeprom = "RT2860.eeprom";
@@ -99,6 +94,7 @@
 
 		etop@E180000 {
 			phy-mode = "mii";
+			mtd-mac-address = <&boardconfig 0x16>;
 		};
 
 		pci@E105400 {

target/linux/lantiq/dts/ARV752DPW.dts

@@ -60,7 +60,7 @@
 						reg = <0x20000 0x7d0000>;
 					};
 
-					partition@7f0000 {
+					boardconfig: partition@7f0000 {
 						label = "board_config";
 						reg = <0x7f0000 0x10000>;
 						read-only;
@@ -68,11 +68,6 @@
 				};
 			};
 
-			mac_addr {
-				compatible = "lantiq,eth-mac";
-				reg = <0 0x7f0016 0x6>;
-			};
-
 			gpiomm: gpiomm@4000000 {
 				compatible = "lantiq,gpio-mm";
 				reg = <1 0x0 0x10 >;
@@ -137,6 +132,7 @@
 
 		etop@E180000 {
 			phy-mode = "rmii";
+			mtd-mac-address = <&boardconfig 0x16>;
 		};
 
 		pci@E105400 {

target/linux/lantiq/dts/ARV752DPW22.dts

@@ -60,7 +60,7 @@
 						reg = <0x40000 0x7b0000>;
 					};
 
-					partition@7f0000 {
+					boardconfig: partition@7f0000 {
 						label = "board_config";
 						reg = <0x7f0000 0x10000>;
 						read-only;
@@ -68,11 +68,6 @@
 				};
 			};
 
-			mac_addr {
-				compatible = "lantiq,eth-mac";
-				reg = <0 0x7f0016 0x6>;
-			};
-
 			gpiomm: gpiomm@4000000 {
 				compatible = "lantiq,gpio-mm";
 				reg = <1 0x0 0x10 >;
@@ -136,6 +131,7 @@
 
 		etop@E180000 {
 			phy-mode = "mii";
+			mtd-mac-address = <&boardconfig 0x16>;
 		};
 
 		pci@E105400 {

target/linux/lantiq/dts/ARV8539PW22.dts

@@ -67,11 +67,6 @@
 				};
 			};
 
-			mac_addr {
-				compatible = "lantiq,eth-mac";
-				reg = <0 0x7f0016 0x6>;
-			};
-
 			ath9k_eep {
 				compatible = "ath9k,eeprom";
 				ath,eep-flash = <&art 0x400>;
@@ -114,6 +109,7 @@
 
 		etop@E180000 {
 			phy-mode = "mii";
+			mtd-mac-address = <&art 0x16>;
 		};
 
 		pci@E105400 {

target/linux/lantiq/dts/WBMR.dts

@@ -55,24 +55,19 @@
 						reg = <0x60000 0x1f20000>;
 					};
 
-					partition@0x1fc0000 {
+					boardconfig: partition@1fc0000 {
 						label = "board";
 						reg = <0x1fc0000 0x20000>;
 						read-only;
 					};
 
-					partition@0x1fe0000 {
+					partition@1fe0000 {
 						label = "calibration";
 						reg = <0x1fe0000 0x20000>;
 						read-only;
 					};
 				};
 			};
-
-			mac_addr {
-				compatible = "lantiq,eth-mac";
-				reg = <0 0x1fd0024 0x6>;
-			};
 		};
 
 		gpio: pinmux@E100B10 {
@@ -101,6 +96,7 @@
 
 		etop@E180000 {
 			phy-mode = "rgmii";
+			mtd-mac-address = <&boardconfig 0x10024>;
 		};
 
 		ifxhcd@E101000 {