parent
dcfa07d142
commit
7fc886584f
@ -1,103 +0,0 @@ |
|||||||
Index: linux-2.6.23.17/arch/mips/Kconfig
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/arch/mips/Kconfig
|
|
||||||
+++ linux-2.6.23.17/arch/mips/Kconfig
|
|
||||||
@@ -595,6 +595,20 @@ config WR_PPMC
|
|
||||||
This enables support for the Wind River MIPS32 4KC PPMC evaluation
|
|
||||||
board, which is based on GT64120 bridge chip.
|
|
||||||
|
|
||||||
+config MIKROTIK_RB500
|
|
||||||
+ bool "Support for RB5xx boards"
|
|
||||||
+ select HW_HAS_PCI
|
|
||||||
+ select IRQ_CPU
|
|
||||||
+ select SYS_HAS_CPU_MIPS32_R1
|
|
||||||
+ select SYS_SUPPORTS_LITTLE_ENDIAN
|
|
||||||
+ select SYS_SUPPORTS_32BIT_KERNEL
|
|
||||||
+ select SWAP_IO_SPACE
|
|
||||||
+ select DMA_NONCOHERENT
|
|
||||||
+ select GENERIC_GPIO
|
|
||||||
+ help
|
|
||||||
+ Support the Mikrotik(tm) Routerboard 500 series,
|
|
||||||
+ such as the RB532.
|
|
||||||
+
|
|
||||||
endchoice
|
|
||||||
|
|
||||||
source "arch/mips/au1000/Kconfig"
|
|
||||||
@@ -829,6 +843,7 @@ config MIPS_L1_CACHE_SHIFT
|
|
||||||
default "4" if MACH_DECSTATION
|
|
||||||
default "7" if SGI_IP27 || SNI_RM
|
|
||||||
default "4" if PMC_MSP4200_EVAL
|
|
||||||
+ default "4" if MIKROTIK_RB500
|
|
||||||
default "5"
|
|
||||||
|
|
||||||
config HAVE_STD_PC_SERIAL_PORT
|
|
||||||
Index: linux-2.6.23.17/arch/mips/Makefile
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/arch/mips/Makefile
|
|
||||||
+++ linux-2.6.23.17/arch/mips/Makefile
|
|
||||||
@@ -300,6 +300,13 @@ load-$(CONFIG_LEMOTE_FULONG) +=0xfffffff
|
|
||||||
cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote
|
|
||||||
|
|
||||||
#
|
|
||||||
+# Routerboard 532 board
|
|
||||||
+#
|
|
||||||
+core-$(CONFIG_MIKROTIK_RB500) += arch/mips/rb500/
|
|
||||||
+cflags-$(CONFIG_MIKROTIK_RB500) += -Iinclude/asm-mips/rc32434
|
|
||||||
+load-$(CONFIG_MIKROTIK_RB500) += 0xffffffff80101000
|
|
||||||
+
|
|
||||||
+#
|
|
||||||
# For all MIPS, Inc. eval boards
|
|
||||||
#
|
|
||||||
core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/
|
|
||||||
Index: linux-2.6.23.17/arch/mips/pci/Makefile
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/arch/mips/pci/Makefile
|
|
||||||
+++ linux-2.6.23.17/arch/mips/pci/Makefile
|
|
||||||
@@ -46,3 +46,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-
|
|
||||||
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
|
|
||||||
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
|
|
||||||
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
|
|
||||||
+obj-$(CONFIG_MIKROTIK_RB500) += pci-rc32434.o ops-rc32434.o fixup-rb500.o
|
|
||||||
Index: linux-2.6.23.17/drivers/pci/Makefile
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/drivers/pci/Makefile
|
|
||||||
+++ linux-2.6.23.17/drivers/pci/Makefile
|
|
||||||
@@ -32,6 +32,7 @@ obj-$(CONFIG_PPC32) += setup-irq.o
|
|
||||||
obj-$(CONFIG_PPC64) += setup-bus.o
|
|
||||||
obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
|
|
||||||
obj-$(CONFIG_X86_VISWS) += setup-irq.o
|
|
||||||
+obj-$(CONFIG_MIKROTIK_RB500) += setup-irq.o
|
|
||||||
|
|
||||||
#
|
|
||||||
# ACPI Related PCI FW Functions
|
|
||||||
Index: linux-2.6.23.17/include/asm-mips/bootinfo.h
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/include/asm-mips/bootinfo.h
|
|
||||||
+++ linux-2.6.23.17/include/asm-mips/bootinfo.h
|
|
||||||
@@ -208,6 +208,11 @@
|
|
||||||
#define MACH_GROUP_WINDRIVER 28 /* Windriver boards */
|
|
||||||
#define MACH_WRPPMC 1
|
|
||||||
|
|
||||||
+
|
|
||||||
+#define MACH_GROUP_MIKROTIK 29 /* Mikrotik Boards */
|
|
||||||
+#define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */
|
|
||||||
+#define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */
|
|
||||||
+
|
|
||||||
#define CL_SIZE COMMAND_LINE_SIZE
|
|
||||||
|
|
||||||
const char *get_system_type(void);
|
|
||||||
Index: linux-2.6.23.17/include/asm-mips/cpu.h
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/include/asm-mips/cpu.h
|
|
||||||
+++ linux-2.6.23.17/include/asm-mips/cpu.h
|
|
||||||
@@ -217,8 +217,9 @@
|
|
||||||
#define CPU_R14000 64
|
|
||||||
#define CPU_LOONGSON1 65
|
|
||||||
#define CPU_LOONGSON2 66
|
|
||||||
+#define CPU_RC32300 67
|
|
||||||
|
|
||||||
-#define CPU_LAST 66
|
|
||||||
+#define CPU_LAST 67
|
|
||||||
|
|
||||||
/*
|
|
||||||
* ISA Level encodings
|
|
@ -1,31 +0,0 @@ |
|||||||
Index: linux-2.6.23.17/drivers/net/Kconfig
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/drivers/net/Kconfig
|
|
||||||
+++ linux-2.6.23.17/drivers/net/Kconfig
|
|
||||||
@@ -348,6 +348,13 @@ config AX88796
|
|
||||||
AX88796 driver, using platform bus to provide
|
|
||||||
chip detection and resources
|
|
||||||
|
|
||||||
+config KORINA
|
|
||||||
+ tristate "Korina Local Ethernet support"
|
|
||||||
+ depends on NET_ETHERNET && ( IDT_EB434 || MIKROTIK_RB500)
|
|
||||||
+ help
|
|
||||||
+ IDT RC32434 has one local ethernet port. Say Y here to enable it.
|
|
||||||
+ To compile this driver as a module, choose M here.
|
|
||||||
+
|
|
||||||
config MACE
|
|
||||||
tristate "MACE (Power Mac ethernet) support"
|
|
||||||
depends on PPC_PMAC && PPC32
|
|
||||||
Index: linux-2.6.23.17/drivers/net/Makefile
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/drivers/net/Makefile
|
|
||||||
+++ linux-2.6.23.17/drivers/net/Makefile
|
|
||||||
@@ -25,6 +25,8 @@ ucc_geth_driver-objs := ucc_geth.o ucc_g
|
|
||||||
#
|
|
||||||
obj-$(CONFIG_PLIP) += plip.o
|
|
||||||
|
|
||||||
+obj-$(CONFIG_KORINA) += korina.o
|
|
||||||
+
|
|
||||||
obj-$(CONFIG_ROADRUNNER) += rrunner.o
|
|
||||||
|
|
||||||
obj-$(CONFIG_HAPPYMEAL) += sunhme.o
|
|
@ -1,31 +0,0 @@ |
|||||||
Index: linux-2.6.23.17/drivers/block/Kconfig
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/drivers/block/Kconfig
|
|
||||||
+++ linux-2.6.23.17/drivers/block/Kconfig
|
|
||||||
@@ -426,6 +426,14 @@ config SUNVDC
|
|
||||||
Support for virtual disk devices as a client under Sun
|
|
||||||
Logical Domains.
|
|
||||||
|
|
||||||
+config BLK_DEV_CF_MIPS
|
|
||||||
+ bool "CF slot of RB532 board"
|
|
||||||
+ depends on MIKROTIK_RB500
|
|
||||||
+ default y
|
|
||||||
+ help
|
|
||||||
+ The Routerboard 532 has a CF slot on it. Enable the special block
|
|
||||||
+ device driver for it.
|
|
||||||
+
|
|
||||||
source "drivers/s390/block/Kconfig"
|
|
||||||
|
|
||||||
config XILINX_SYSACE
|
|
||||||
Index: linux-2.6.23.17/drivers/block/Makefile
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/drivers/block/Makefile
|
|
||||||
+++ linux-2.6.23.17/drivers/block/Makefile
|
|
||||||
@@ -21,6 +21,7 @@ obj-$(CONFIG_BLK_DEV_DAC960) += DAC960.o
|
|
||||||
obj-$(CONFIG_XILINX_SYSACE) += xsysace.o
|
|
||||||
obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o
|
|
||||||
obj-$(CONFIG_SUNVDC) += sunvdc.o
|
|
||||||
+obj-$(CONFIG_BLK_DEV_CF_MIPS) += rb500/
|
|
||||||
|
|
||||||
obj-$(CONFIG_BLK_DEV_UMEM) += umem.o
|
|
||||||
obj-$(CONFIG_BLK_DEV_NBD) += nbd.o
|
|
@ -1,15 +0,0 @@ |
|||||||
Index: linux-2.6.23.17/arch/mips/kernel/head.S
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/arch/mips/kernel/head.S
|
|
||||||
+++ linux-2.6.23.17/arch/mips/kernel/head.S
|
|
||||||
@@ -132,6 +132,10 @@
|
|
||||||
|
|
||||||
j kernel_entry
|
|
||||||
nop
|
|
||||||
+
|
|
||||||
+EXPORT(_image_cmdline)
|
|
||||||
+ .ascii "CMDLINE:"
|
|
||||||
+
|
|
||||||
#ifndef CONFIG_NO_EXCEPT_FILL
|
|
||||||
/*
|
|
||||||
* Reserved space for exception handlers.
|
|
@ -1,15 +0,0 @@ |
|||||||
Index: linux-2.6.23.17/arch/mips/pci/pci.c
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/arch/mips/pci/pci.c
|
|
||||||
+++ linux-2.6.23.17/arch/mips/pci/pci.c
|
|
||||||
@@ -64,8 +64,10 @@ pcibios_align_resource(void *data, struc
|
|
||||||
/*
|
|
||||||
* Put everything into 0x00-0xff region modulo 0x400
|
|
||||||
*/
|
|
||||||
+#ifndef CONFIG_MIKROTIK_RB500
|
|
||||||
if (start & 0x300)
|
|
||||||
start = (start + 0x3ff) & ~0x3ff;
|
|
||||||
+#endif
|
|
||||||
} else if (res->flags & IORESOURCE_MEM) {
|
|
||||||
/* Make sure we start at our min on all hoses */
|
|
||||||
if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
|
|
@ -1,18 +0,0 @@ |
|||||||
Index: linux-2.6.23.17/drivers/serial/8250.c
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/drivers/serial/8250.c
|
|
||||||
+++ linux-2.6.23.17/drivers/serial/8250.c
|
|
||||||
@@ -433,6 +433,13 @@ serial_out(struct uart_8250_port *up, in
|
|
||||||
default:
|
|
||||||
outb(value, up->port.iobase + offset);
|
|
||||||
}
|
|
||||||
+
|
|
||||||
+#if defined(CONFIG_IDT_EB434) || defined(CONFIG_MIKROTIK_RB500)
|
|
||||||
+ __SLOW_DOWN_IO;
|
|
||||||
+ __SLOW_DOWN_IO;
|
|
||||||
+ __SLOW_DOWN_IO;
|
|
||||||
+ __SLOW_DOWN_IO;
|
|
||||||
+#endif
|
|
||||||
}
|
|
||||||
|
|
||||||
static void
|
|
@ -1,100 +0,0 @@ |
|||||||
Index: linux-2.6.23.17/drivers/net/via-rhine.c
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/drivers/net/via-rhine.c
|
|
||||||
+++ linux-2.6.23.17/drivers/net/via-rhine.c
|
|
||||||
@@ -33,6 +33,8 @@
|
|
||||||
#define DRV_VERSION "1.4.3"
|
|
||||||
#define DRV_RELDATE "2007-03-06"
|
|
||||||
|
|
||||||
+#define PKT_ALIGN 1
|
|
||||||
+
|
|
||||||
|
|
||||||
/* A few user-configurable values.
|
|
||||||
These may be modified when a driver module is loaded. */
|
|
||||||
@@ -40,6 +42,7 @@
|
|
||||||
static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
|
|
||||||
static int max_interrupt_work = 20;
|
|
||||||
|
|
||||||
+#ifndef PKT_ALIGN
|
|
||||||
/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
|
|
||||||
Setting to > 1518 effectively disables this feature. */
|
|
||||||
#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
|
|
||||||
@@ -49,6 +52,7 @@ static int rx_copybreak = 1518;
|
|
||||||
#else
|
|
||||||
static int rx_copybreak;
|
|
||||||
#endif
|
|
||||||
+#endif /* PKT_ALIGN */
|
|
||||||
|
|
||||||
/* Work-around for broken BIOSes: they are unable to get the chip back out of
|
|
||||||
power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
|
|
||||||
@@ -111,6 +115,7 @@ static const int multicast_filter_limit
|
|
||||||
#include <asm/io.h>
|
|
||||||
#include <asm/irq.h>
|
|
||||||
#include <asm/uaccess.h>
|
|
||||||
+#include <asm/unaligned.h>
|
|
||||||
#include <linux/dmi.h>
|
|
||||||
|
|
||||||
/* These identify the driver base version and may not be removed. */
|
|
||||||
@@ -130,12 +135,14 @@ MODULE_LICENSE("GPL");
|
|
||||||
|
|
||||||
module_param(max_interrupt_work, int, 0);
|
|
||||||
module_param(debug, int, 0);
|
|
||||||
-module_param(rx_copybreak, int, 0);
|
|
||||||
module_param(avoid_D3, bool, 0);
|
|
||||||
MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt");
|
|
||||||
MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)");
|
|
||||||
-MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
|
|
||||||
MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)");
|
|
||||||
+#ifndef PKT_ALIGN
|
|
||||||
+module_param(rx_copybreak, int, 0);
|
|
||||||
+MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
|
|
||||||
+#endif
|
|
||||||
|
|
||||||
/*
|
|
||||||
Theory of Operation
|
|
||||||
@@ -927,7 +934,7 @@ static void alloc_rbufs(struct net_devic
|
|
||||||
|
|
||||||
/* Fill in the Rx buffers. Handle allocation failure gracefully. */
|
|
||||||
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
||||||
- struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz);
|
|
||||||
+ struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz + 4);
|
|
||||||
rp->rx_skbuff[i] = skb;
|
|
||||||
if (skb == NULL)
|
|
||||||
break;
|
|
||||||
@@ -1484,7 +1491,9 @@ static int rhine_rx(struct net_device *d
|
|
||||||
struct sk_buff *skb;
|
|
||||||
/* Length should omit the CRC */
|
|
||||||
int pkt_len = data_size - 4;
|
|
||||||
-
|
|
||||||
+#ifdef PKT_ALIGN
|
|
||||||
+ int i;
|
|
||||||
+#else
|
|
||||||
/* Check if the packet is long enough to accept without
|
|
||||||
copying to a minimally-sized skbuff. */
|
|
||||||
if (pkt_len < rx_copybreak &&
|
|
||||||
@@ -1503,7 +1512,9 @@ static int rhine_rx(struct net_device *d
|
|
||||||
rp->rx_skbuff_dma[entry],
|
|
||||||
rp->rx_buf_sz,
|
|
||||||
PCI_DMA_FROMDEVICE);
|
|
||||||
- } else {
|
|
||||||
+ } else
|
|
||||||
+#endif
|
|
||||||
+ {
|
|
||||||
skb = rp->rx_skbuff[entry];
|
|
||||||
if (skb == NULL) {
|
|
||||||
printk(KERN_ERR "%s: Inconsistent Rx "
|
|
||||||
@@ -1517,6 +1528,14 @@ static int rhine_rx(struct net_device *d
|
|
||||||
rp->rx_skbuff_dma[entry],
|
|
||||||
rp->rx_buf_sz,
|
|
||||||
PCI_DMA_FROMDEVICE);
|
|
||||||
+#ifdef PKT_ALIGN
|
|
||||||
+ /* align the data to the ip header - should be faster than copying the entire packet */
|
|
||||||
+ for (i = pkt_len - (pkt_len % 4); i >= 0; i -= 4) {
|
|
||||||
+ put_unaligned(*((u32 *) (skb->data + i)), (u32 *) (skb->data + i + 2));
|
|
||||||
+ }
|
|
||||||
+ skb->data += 2;
|
|
||||||
+ skb->tail += 2;
|
|
||||||
+#endif
|
|
||||||
}
|
|
||||||
skb->protocol = eth_type_trans(skb, dev);
|
|
||||||
#ifdef CONFIG_VIA_RHINE_NAPI
|
|
@ -1,29 +0,0 @@ |
|||||||
Index: linux-2.6.23.17/drivers/leds/Kconfig
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/drivers/leds/Kconfig
|
|
||||||
+++ linux-2.6.23.17/drivers/leds/Kconfig
|
|
||||||
@@ -107,6 +107,12 @@ config LEDS_GPIO
|
|
||||||
outputs. To be useful the particular board must have LEDs
|
|
||||||
and they must be connected to the GPIO lines.
|
|
||||||
|
|
||||||
+config LEDS_RB500
|
|
||||||
+ tristate "LED Support for RB5xx boards"
|
|
||||||
+ depends LEDS_CLASS && MIKROTIK_RB500
|
|
||||||
+ help
|
|
||||||
+ This option enables support for the yellow user LED on RB5xx boards.
|
|
||||||
+
|
|
||||||
comment "LED Triggers"
|
|
||||||
|
|
||||||
config LEDS_TRIGGERS
|
|
||||||
Index: linux-2.6.23.17/drivers/leds/Makefile
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/drivers/leds/Makefile
|
|
||||||
+++ linux-2.6.23.17/drivers/leds/Makefile
|
|
||||||
@@ -18,6 +18,7 @@ obj-$(CONFIG_LEDS_ALIX) += leds-alix.o
|
|
||||||
obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
|
|
||||||
obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o
|
|
||||||
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
|
|
||||||
+obj-$(CONFIG_LEDS_RB500) += leds-rb500.o
|
|
||||||
|
|
||||||
# LED Triggers
|
|
||||||
obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
|
|
@ -1,46 +0,0 @@ |
|||||||
Index: linux-2.6.23.17/arch/mips/kernel/time.c
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/arch/mips/kernel/time.c
|
|
||||||
+++ linux-2.6.23.17/arch/mips/kernel/time.c
|
|
||||||
@@ -479,3 +479,5 @@ EXPORT_SYMBOL(rtc_lock);
|
|
||||||
EXPORT_SYMBOL(to_tm);
|
|
||||||
EXPORT_SYMBOL(rtc_mips_set_time);
|
|
||||||
EXPORT_SYMBOL(rtc_mips_get_time);
|
|
||||||
+EXPORT_SYMBOL(mips_hpt_frequency);
|
|
||||||
+
|
|
||||||
Index: linux-2.6.23.17/drivers/char/watchdog/Kconfig
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/drivers/char/watchdog/Kconfig
|
|
||||||
+++ linux-2.6.23.17/drivers/char/watchdog/Kconfig
|
|
||||||
@@ -647,6 +647,19 @@ config WATCHDOG_RTAS
|
|
||||||
To compile this driver as a module, choose M here. The module
|
|
||||||
will be called wdrtas.
|
|
||||||
|
|
||||||
+config RC32434_WDT
|
|
||||||
+ tristate "IDT Interprise 79RC32434 SoC hardware watchdog"
|
|
||||||
+ depends on WATCHDOG && MIKROTIK_RB500
|
|
||||||
+ help
|
|
||||||
+ This is a driver for hardware watchdog integrated in IDT Interprise
|
|
||||||
+ 79RC32434 SoC. This watchdog simply watches your kernel to make sure
|
|
||||||
+ it doesn't freeze, and if it does, it reboots your computer after a
|
|
||||||
+ certain amount of time.
|
|
||||||
+
|
|
||||||
+ To compile this driver as a module, choose M here: the module will be
|
|
||||||
+ called rc32434_wdt.
|
|
||||||
+
|
|
||||||
+
|
|
||||||
# S390 Architecture
|
|
||||||
|
|
||||||
config ZVM_WATCHDOG
|
|
||||||
Index: linux-2.6.23.17/drivers/char/watchdog/Makefile
|
|
||||||
===================================================================
|
|
||||||
--- linux-2.6.23.17.orig/drivers/char/watchdog/Makefile
|
|
||||||
+++ linux-2.6.23.17/drivers/char/watchdog/Makefile
|
|
||||||
@@ -90,6 +90,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc
|
|
||||||
obj-$(CONFIG_INDYDOG) += indydog.o
|
|
||||||
obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
|
|
||||||
obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
|
|
||||||
+obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
|
|
||||||
|
|
||||||
# PARISC Architecture
|
|
||||||
|
|
Loading…
Reference in new issue