Qihoo 360 C301 is a dual band wireless router supports 802.11n and 802.11ac. Its chipset is AR9344 + AR9882 with two 16MB flashes. This patch adds its initial support. v2: * use mtd_get_mac_ascii to fetch MAC address for ath10k. * use ath79_register_pci to initialize AR9882. Signed-off-by: Weijie Gao <hackpascal@gmail.com> SVN-Revision: 42552master
John Crispin
11 years ago
parent
b520e9b8d4
commit
7dbbdfb61f
@ -0,0 +1,166 @@ |
||||
/*
|
||||
* Qihoo 360 C301 board support |
||||
* |
||||
* Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> |
||||
* Copyright (C) 2014 Weijie Gao <hackpascal@gmail.com> |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify it |
||||
* under the terms of the GNU General Public License version 2 as published |
||||
* by the Free Software Foundation. |
||||
*/ |
||||
|
||||
#include <linux/pci.h> |
||||
#include <linux/phy.h> |
||||
#include <linux/gpio.h> |
||||
#include <linux/platform_device.h> |
||||
#include <linux/ath9k_platform.h> |
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h> |
||||
|
||||
#include "common.h" |
||||
#include "pci.h" |
||||
#include "dev-eth.h" |
||||
#include "dev-gpio-buttons.h" |
||||
#include "dev-leds-gpio.h" |
||||
#include "dev-m25p80.h" |
||||
#include "dev-spi.h" |
||||
#include "dev-usb.h" |
||||
#include "dev-wmac.h" |
||||
#include "machtypes.h" |
||||
#include "nvram.h" |
||||
|
||||
#define QIHOO_C301_GPIO_LED_STATUS_GREEN 0 |
||||
#define QIHOO_C301_GPIO_LED_STATUS_RED 11 |
||||
|
||||
#define QIHOO_C301_GPIO_LED_WAN 1 |
||||
#define QIHOO_C301_GPIO_LED_LAN1 2 |
||||
#define QIHOO_C301_GPIO_LED_LAN2 3 |
||||
#define QIHOO_C301_GPIO_ETH_LEN_EN 18 |
||||
|
||||
#define QIHOO_C301_GPIO_BTN_RESET 16 |
||||
|
||||
#define QIHOO_C301_GPIO_USB_POWER 19 |
||||
|
||||
#define QIHOO_C301_GPIO_SPI_CS1 12 |
||||
|
||||
#define QIHOO_C301_GPIO_EXTERNAL_LNA0 14 |
||||
#define QIHOO_C301_GPIO_EXTERNAL_LNA1 15 |
||||
|
||||
#define QIHOO_C301_KEYS_POLL_INTERVAL 20 /* msecs */ |
||||
#define QIHOO_C301_KEYS_DEBOUNCE_INTERVAL \ |
||||
(3 * QIHOO_C301_KEYS_POLL_INTERVAL) |
||||
|
||||
#define QIHOO_C301_WMAC_CALDATA_OFFSET 0x1000 |
||||
|
||||
#define QIHOO_C301_NVRAM_ADDR 0x1f058010 |
||||
#define QIHOO_C301_NVRAM_SIZE 0x7ff0 |
||||
|
||||
static struct gpio_led qihoo_c301_leds_gpio[] __initdata = { |
||||
{ |
||||
.name = "qihoo:green:status", |
||||
.gpio = QIHOO_C301_GPIO_LED_STATUS_GREEN, |
||||
.active_low = 1, |
||||
}, |
||||
{ |
||||
.name = "qihoo:red:status", |
||||
.gpio = QIHOO_C301_GPIO_LED_STATUS_RED, |
||||
.active_low = 1, |
||||
}, |
||||
}; |
||||
|
||||
static struct gpio_keys_button qihoo_c301_gpio_keys[] __initdata = { |
||||
{ |
||||
.desc = "reset", |
||||
.type = EV_KEY, |
||||
.code = KEY_RESTART, |
||||
.debounce_interval = QIHOO_C301_KEYS_DEBOUNCE_INTERVAL, |
||||
.gpio = QIHOO_C301_GPIO_BTN_RESET, |
||||
.active_low = 1, |
||||
}, |
||||
}; |
||||
|
||||
struct flash_platform_data flash __initdata = {NULL, NULL, 0}; |
||||
|
||||
static void qihoo_c301_get_mac(const char *name, char *mac) |
||||
{ |
||||
u8 *nvram = (u8 *) KSEG1ADDR(QIHOO_C301_NVRAM_ADDR); |
||||
int err; |
||||
|
||||
err = ath79_nvram_parse_mac_addr(nvram, QIHOO_C301_NVRAM_SIZE, |
||||
name, mac); |
||||
if (err) |
||||
pr_err("no MAC address found for %s\n", name); |
||||
} |
||||
|
||||
static void __init qihoo_c301_setup(void) |
||||
{ |
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); |
||||
u8 tmpmac[ETH_ALEN]; |
||||
|
||||
ath79_register_m25p80_multi(&flash); |
||||
|
||||
ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); |
||||
|
||||
ath79_gpio_output_select(QIHOO_C301_GPIO_LED_WAN, |
||||
AR934X_GPIO_OUT_LED_LINK4); |
||||
ath79_gpio_output_select(QIHOO_C301_GPIO_LED_LAN1, |
||||
AR934X_GPIO_OUT_LED_LINK1); |
||||
ath79_gpio_output_select(QIHOO_C301_GPIO_LED_LAN2, |
||||
AR934X_GPIO_OUT_LED_LINK2); |
||||
|
||||
ath79_gpio_output_select(QIHOO_C301_GPIO_SPI_CS1, |
||||
AR934X_GPIO_OUT_SPI_CS1); |
||||
|
||||
gpio_request_one(QIHOO_C301_GPIO_ETH_LEN_EN, |
||||
GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, |
||||
"Ethernet LED enable"); |
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(qihoo_c301_leds_gpio), |
||||
qihoo_c301_leds_gpio); |
||||
|
||||
ath79_register_gpio_keys_polled(-1, QIHOO_C301_KEYS_POLL_INTERVAL, |
||||
ARRAY_SIZE(qihoo_c301_gpio_keys), |
||||
qihoo_c301_gpio_keys); |
||||
|
||||
ath79_wmac_set_ext_lna_gpio(0, QIHOO_C301_GPIO_EXTERNAL_LNA0); |
||||
ath79_wmac_set_ext_lna_gpio(1, QIHOO_C301_GPIO_EXTERNAL_LNA1); |
||||
|
||||
qihoo_c301_get_mac("wlan24mac=", tmpmac); |
||||
ath79_register_wmac(art + QIHOO_C301_WMAC_CALDATA_OFFSET, tmpmac); |
||||
|
||||
ath79_register_pci(); |
||||
|
||||
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE | |
||||
AR934X_ETH_CFG_SW_PHY_SWAP); |
||||
|
||||
ath79_register_mdio(1, 0x0); |
||||
|
||||
/* LAN */ |
||||
qihoo_c301_get_mac("lanmac=", ath79_eth1_data.mac_addr); |
||||
|
||||
/* GMAC1 is connected to the internal switch */ |
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; |
||||
|
||||
ath79_register_eth(1); |
||||
|
||||
/* WAN */ |
||||
qihoo_c301_get_mac("wanmac=", ath79_eth0_data.mac_addr); |
||||
|
||||
/* GMAC0 is connected to the PHY4 of the internal switch */ |
||||
ath79_switch_data.phy4_mii_en = 1; |
||||
ath79_switch_data.phy_poll_mask = BIT(0); |
||||
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; |
||||
ath79_eth0_data.phy_mask = BIT(0); |
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; |
||||
|
||||
ath79_register_eth(0); |
||||
|
||||
gpio_request_one(QIHOO_C301_GPIO_USB_POWER, |
||||
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, |
||||
"USB power"); |
||||
ath79_register_usb(); |
||||
} |
||||
|
||||
MIPS_MACHINE(ATH79_MACH_QIHOO_C301, "QIHOO-C301", "Qihoo 360 C301", |
||||
qihoo_c301_setup); |
||||
@ -0,0 +1,16 @@ |
||||
#
|
||||
# Copyright (C) 2013 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
|
||||
define Profile/QIHOO360 |
||||
NAME:=Qihoo 360 C301
|
||||
PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev kmod-ath10k
|
||||
endef |
||||
|
||||
define Profile/QIHOO360/Description |
||||
Package set optimized for the Qihoo 360 C301 device.
|
||||
endef |
||||
$(eval $(call Profile,QIHOO360)) |
||||
@ -0,0 +1,40 @@ |
||||
--- a/arch/mips/ath79/Kconfig
|
||||
+++ b/arch/mips/ath79/Kconfig
|
||||
@@ -1034,6 +1034,17 @@
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
+config ATH79_MACH_QIHOO_C301
|
||||
+ bool "Qihoo 360 C301 board support"
|
||||
+ select SOC_AR934X
|
||||
+ select ATH79_DEV_ETH
|
||||
+ select ATH79_DEV_GPIO_BUTTONS
|
||||
+ select ATH79_DEV_LEDS_GPIO
|
||||
+ select ATH79_DEV_M25P80
|
||||
+ select ATH79_DEV_WMAC
|
||||
+ select ATH79_DEV_USB
|
||||
+ select ATH79_NVRAM
|
||||
+
|
||||
endmenu
|
||||
|
||||
config SOC_AR71XX
|
||||
--- a/arch/mips/ath79/machtypes.h
|
||||
+++ b/arch/mips/ath79/machtypes.h
|
||||
@@ -80,6 +80,7 @@
|
||||
ATH79_MACH_OM5P, /* OpenMesh OM5P */
|
||||
ATH79_MACH_PB42, /* Atheros PB42 */
|
||||
ATH79_MACH_PB92, /* Atheros PB92 */
|
||||
+ ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */
|
||||
ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
|
||||
ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
|
||||
ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
|
||||
--- a/arch/mips/ath79/Makefile
|
||||
+++ b/arch/mips/ath79/Makefile
|
||||
@@ -85,6 +85,7 @@
|
||||
obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
|
||||
obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
|
||||
obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o
|
||||
+obj-$(CONFIG_ATH79_MACH_QIHOO_C301) += mach-qihoo-c301.o
|
||||
obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
|
||||
obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
|
||||
obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o
|
||||
@ -0,0 +1,40 @@ |
||||
--- a/arch/mips/ath79/Kconfig
|
||||
+++ b/arch/mips/ath79/Kconfig
|
||||
@@ -1034,6 +1034,17 @@
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
+config ATH79_MACH_QIHOO_C301
|
||||
+ bool "Qihoo 360 C301 board support"
|
||||
+ select SOC_AR934X
|
||||
+ select ATH79_DEV_ETH
|
||||
+ select ATH79_DEV_GPIO_BUTTONS
|
||||
+ select ATH79_DEV_LEDS_GPIO
|
||||
+ select ATH79_DEV_M25P80
|
||||
+ select ATH79_DEV_WMAC
|
||||
+ select ATH79_DEV_USB
|
||||
+ select ATH79_NVRAM
|
||||
+
|
||||
endmenu
|
||||
|
||||
config SOC_AR71XX
|
||||
--- a/arch/mips/ath79/machtypes.h
|
||||
+++ b/arch/mips/ath79/machtypes.h
|
||||
@@ -80,6 +80,7 @@
|
||||
ATH79_MACH_OM5P, /* OpenMesh OM5P */
|
||||
ATH79_MACH_PB42, /* Atheros PB42 */
|
||||
ATH79_MACH_PB92, /* Atheros PB92 */
|
||||
+ ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */
|
||||
ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
|
||||
ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
|
||||
ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
|
||||
--- a/arch/mips/ath79/Makefile
|
||||
+++ b/arch/mips/ath79/Makefile
|
||||
@@ -85,6 +85,7 @@
|
||||
obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
|
||||
obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
|
||||
obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o
|
||||
+obj-$(CONFIG_ATH79_MACH_QIHOO_C301) += mach-qihoo-c301.o
|
||||
obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
|
||||
obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
|
||||
obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o
|
||||
Loading…
Reference in new issue