The GnuBee Personal Cloud One crowdfunded on https://www.crowdsupply.com It is a low-cost, low-power, network-attached storage device. Specifications: - SoC: MediaTek MT7621AT - RAM: DDR3 512 MB - Flash: 32 MB - Six SATA ports for 2.5" Drives - One micro SDcard - One USB 3.0 - Two USB 2.0 - Gigabit Ethernet: 1 x WAN and 1 x LAN - UART 3.5mm Audio Jack or 3 pin header - 57600 8N1 - Four GPIOs available on a pin header Flash instructions: The GnuBee Personal Cloud One ships with libreCMC installed. libreCMC is a Free Software Foundation approved fork of LEDE/OpenWrt. As such one can upgrade using the webinterface or sysupgrade. Das U-Boot has multiple options for recovery or updates including : - USB - http - tftp Signed-off-by: L. D. Pinney <ldpinney@gmail.com> [use switchdev led trigger, all interfaces are in vlan1; rename leds according to board.d setting; remove ge2 group from the pinmux, this group doesn't exist in the driver] Signed-off-by: Mathias Kresin <dev@kresin.me>master
parent
4faf314933
commit
77645ffcd9
@ -0,0 +1,120 @@ |
||||
/dts-v1/; |
||||
|
||||
#include "mt7621.dtsi" |
||||
|
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
/ { |
||||
compatible = "gnubee,gb-pc1", "mediatek,mt7621-soc"; |
||||
model = "GB-PC1"; |
||||
|
||||
memory@0 { |
||||
device_type = "memory"; |
||||
reg = <0x0 0x1c000000>, <0x20000000 0x4000000>; |
||||
}; |
||||
|
||||
chosen { |
||||
bootargs = "console=ttyS0,57600"; |
||||
}; |
||||
|
||||
palmbus: palmbus@1E000000 { |
||||
i2c@900 { |
||||
status = "okay"; |
||||
}; |
||||
}; |
||||
|
||||
gpio-keys-polled { |
||||
compatible = "gpio-keys-polled"; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
poll-interval = <20>; |
||||
|
||||
reset { |
||||
label = "reset"; |
||||
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; |
||||
linux,code = <KEY_RESTART>; |
||||
}; |
||||
}; |
||||
|
||||
gpio-leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
system { |
||||
label = "gb-pc1:green:system"; |
||||
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
status { |
||||
label = "gb-pc1:green:status"; |
||||
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
lan1 { |
||||
label = "gb-pc1:green:lan1"; |
||||
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
lan2 { |
||||
label = "gb-pc1:green:lan2"; |
||||
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&sdhci { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&spi0 { |
||||
status = "okay"; |
||||
|
||||
m25p80@0 { |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
compatible = "jedec,spi-nor"; |
||||
reg = <0>; |
||||
spi-max-frequency = <10000000>; |
||||
m25p,chunked-io = <32>; |
||||
|
||||
partition@0 { |
||||
label = "u-boot"; |
||||
reg = <0x0 0x30000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@30000 { |
||||
label = "u-boot-env"; |
||||
reg = <0x30000 0x10000>; |
||||
read-only; |
||||
}; |
||||
|
||||
factory: partition@40000 { |
||||
label = "factory"; |
||||
reg = <0x40000 0x10000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@50000 { |
||||
label = "firmware"; |
||||
reg = <0x50000 0x1fb0000>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pcie { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
ðernet { |
||||
mtd-mac-address = <&factory 0xe000>; |
||||
}; |
||||
|
||||
&pinctrl { |
||||
state_default: pinctrl0 { |
||||
gpio { |
||||
ralink,group = "wdt", "rgmii2", "uart3"; |
||||
ralink,function = "gpio"; |
||||
}; |
||||
}; |
||||
}; |
Loading…
Reference in new issue