hsist
/
freifunkist-firmware
6
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

sunxi: add support for Lamobo R1

Browse Source 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44214
master
Zoltan Herpai 10 years ago
parent 45e8630a4f
commit 7146957461
6 changed files with 293 additions and 1 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 6
      target/linux/sunxi/base-files/etc/uci-defaults/02_network
  2. 4
      target/linux/sunxi/base-files/lib/sunxi.sh
  3. 6
      target/linux/sunxi/config-3.18
  4. 7
      target/linux/sunxi/image/Makefile
  5. 252
      target/linux/sunxi/patches-3.18/302-dt-sun7i-add-lamobo-r1.patch
  6. 19
      target/linux/sunxi/profiles/lamobo-r1.mk

6
target/linux/sunxi/base-files/etc/uci-defaults/02_network
Unescape View File

@ -16,6 +16,12 @@ case "$( sunxi_board_name )" in
"olinuxino-micro"*)
ucidef_set_interface_lan 'wlan0'
;;
"lamobo-r1")
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "4 0 1 2 8t"
ucidef_add_switch_vlan "switch0" "2" "3 8t"
;;
*)
ucidef_set_interface_lan 'eth0'
;;

4
target/linux/sunxi/base-files/lib/sunxi.sh
Unescape View File

@ -105,6 +105,10 @@ sunxi_board_detect() {
board="i12-tvbox"
;;
"Lamobo R1")
board="lamobo-r1"
;;
"Olimex A20-OLinuXino-LIME")
board="olinuxino-lime"
;;

6
target/linux/sunxi/config-3.18
Unescape View File

@ -58,6 +58,11 @@ CONFIG_AUDIT=y
CONFIG_AUDIT_GENERIC=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_AVERAGE=y
CONFIG_B53=y
# CONFIG_B53_MMAP_DRIVER is not set
CONFIG_B53_PHY_DRIVER=y
CONFIG_B53_PHY_FIXUP=y
# CONFIG_B53_SRAB_DRIVER is not set
CONFIG_BINFMT_MISC=y
CONFIG_BLK_CGROUP=y
CONFIG_BLK_DEV_SD=y
@ -427,6 +432,7 @@ CONFIG_STRICT_DEVMEM=y
CONFIG_SUN4I_TIMER=y
CONFIG_SUN5I_HSTIMER=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_SWCONFIG=y
CONFIG_SWIOTLB=y
CONFIG_SWP_EMULATE=y
CONFIG_SYSFS_SYSCALL=y

7
target/linux/sunxi/image/Makefile
Unescape View File

@ -24,7 +24,8 @@ BOARDS:= \
sun7i-a20-cubietruck \
sun7i-a20-olinuxino-lime \
sun7i-a20-olinuxino-micro \
sun7i-a20-pcduino3
sun7i-a20-pcduino3 \
sun7i-a20-lamobo-r1
define Image/BuildKernel
mkimage -A arm -O linux -T kernel -C none \
@ -88,6 +89,10 @@ define Image/Build/Profile/Bananapro
$(call Image/Build/SDCard,$(1),sun7i-a20-bananapro)
endef
define Image/Build/Profile/Lamobo_R1
$(call Image/Build/SDCard,$(1),sun7i-a20-lamobo-r1)
endef
define Image/Build/Profile/Cubieboard
$(call Image/Build/SDCard,$(1),sun4i-a10-cubieboard)
endef

252
target/linux/sunxi/patches-3.18/302-dt-sun7i-add-lamobo-r1.patch
Unescape View File

@ -0,0 +1,252 @@
Index: linux-3.18.2/arch/arm/boot/dts/Makefile
===================================================================
--- linux-3.18.2.orig/arch/arm/boot/dts/Makefile
+++ linux-3.18.2/arch/arm/boot/dts/Makefile
@@ -441,6 +441,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-cubietruck.dtb \
sun7i-a20-hummingbird.dtb \
sun7i-a20-i12-tvbox.dtb \
+ sun7i-a20-lamobo-r1.dtb \
sun7i-a20-olinuxino-lime.dtb \
sun7i-a20-olinuxino-micro.dtb \
sun7i-a20-pcduino3.dtb
Index: linux-3.18.2/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
===================================================================
--- /dev/null
+++ linux-3.18.2/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
@@ -0,0 +1,235 @@
+/*
+ * Copyright 2015 Daniel Golle <daniel@makrotopia.org>
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Lamobo R1";
+ compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+ soc@01c00000 {
+ spi0: spi@01c05000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ status = "okay";
+ };
+
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 10 0>; /* PH10 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ usbphy: phy@01c13400 {
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+ };
+
+ ehci0: usb@01c14000 {
+ status = "okay";
+ };
+
+ ohci0: usb@01c14400 {
+ status = "okay";
+ };
+
+ ahci: sata@01c18000 {
+ target-supply = <&reg_ahci_5v>;
+ status = "okay";
+ };
+
+ ehci1: usb@01c1c000 {
+ status = "okay";
+ };
+
+ ohci1: usb@01c1c400 {
+ status = "okay";
+ };
+
+ pinctrl@01c20800 {
+ mmc0_cd_pin_lamobo: mmc0_cd_pin@0 {
+ allwinner,pins = "PH10";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
+ gmac_power_pin_lamobo: gmac_power_pin@0 {
+ allwinner,pins = "PH23";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ led_pins_lamobo: led_pins@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <1>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ lradc: lradc@01c22800 {
+ allwinner,chan0-step = <200>;
+ linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN
+ KEY_MENU KEY_SEARCH KEY_HOME
+ KEY_ESC KEY_ENTER>;
+ status = "okay";
+ };
+
+ ir0: ir@01c21800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+ };
+
+ uart0: serial@01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+
+ uart3: serial@01c28c00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_b>;
+ status = "okay";
+ };
+
+ uart7: serial@01c29c00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
+ status = "okay";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ i2c1: i2c@01c2b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+ };
+
+ i2c2: i2c@01c2b400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+ };
+
+ gmac: ethernet@01c50000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <&reg_gmac_3v3>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_lamobo>;
+
+ green {
+ label = "lamobo:green:usr";
+ gpios = <&pio 7 24 0>;
+ default-state = "on";
+ };
+ };
+
+ reg_ahci_5v: ahci-5v {
+ status = "okay";
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ status = "okay";
+ };
+
+ reg_usb2_vbus: usb2-vbus {
+ status = "okay";
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_power_pin_lamobo>;
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 7 23 0>;
+ status = "okay";
+ };
+};

19
target/linux/sunxi/profiles/lamobo-r1.mk
Unescape View File

@ -0,0 +1,19 @@
#
# Copyright (C) 2015 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/Lamobo_R1
NAME:=Lamobo R1
PACKAGES:=\
uboot-sunxi-Lamobo_R1 kmod-ata-sunxi kmod-rtl8192cu \
swconfig wpad-mini
endef
define Profile/Lamobo_R1/Description
Package set optimized for the Lamobo R1
endef
$(eval $(call Profile,Lamobo_R1))
Write Preview
Loading…
Cancel
Save