@ -15,28 +15,37 @@
# Driver interface for wired authenticator
# Driver interface for wired authenticator
CONFIG_DRIVER_WIRED=y
CONFIG_DRIVER_WIRED=y
# Driver interface for Prism54 driver
#CONFIG_DRIVER_PRISM54=y
# Driver interface for drivers using the nl80211 kernel interface
# Driver interface for drivers using the nl80211 kernel interface
CONFIG_DRIVER_NL80211=y
CONFIG_DRIVER_NL80211=y
# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
# shipped with your distribution yet. If that is the case, you need to build
# QCA vendor extensions to nl80211
# newer libnl version and point the hostapd build to use it.
#CONFIG_DRIVER_NL80211_QCA=y
#LIBNL=/usr/src/libnl
#CFLAGS += -I$(LIBNL)/include
# driver_nl80211.c requires libnl. If you are compiling it yourself
#LIBS += -L$(LIBNL)/lib
# you may need to point hostapd to your version of libnl.
#
#CFLAGS += -I$<path to libnl include files>
#LIBS += -L$<path to libnl library files>
# Use libnl v2.0 (or 3.0) libraries.
#CONFIG_LIBNL20=y
# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
#CONFIG_LIBNL32=y
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
#LIBS += -L/usr/local/lib
#LIBS_p += -L/usr/local/lib
#LIBS_c += -L/usr/local/lib
# Driver interface for no driver (e.g., RADIUS server only)
# Driver interface for no driver (e.g., RADIUS server only)
#CONFIG_DRIVER_NONE=y
#CONFIG_DRIVER_NONE=y
# IEEE 802.11F/IAPP
# IEEE 802.11F/IAPP
# CONFIG_IAPP=y
#CONFIG_IAPP=y
# WPA2/IEEE 802.11i RSN pre-authentication
# WPA2/IEEE 802.11i RSN pre-authentication
CONFIG_RSN_PREAUTH=y
CONFIG_RSN_PREAUTH=y
@ -45,14 +54,15 @@ CONFIG_RSN_PREAUTH=y
CONFIG_PEERKEY=y
CONFIG_PEERKEY=y
# IEEE 802.11w (management frame protection)
# IEEE 802.11w (management frame protection)
# This version is an experimental implementation based on IEEE 802.11w/D1.0
# draft and is subject to change since the standard has not yet been finalized.
# Driver support is also needed for IEEE 802.11w.
# Driver support is also needed for IEEE 802.11w.
#CONFIG_IEEE80211W=y
#CONFIG_IEEE80211W=y
# Integrated EAP server
# Integrated EAP server
#CONFIG_EAP=y
#CONFIG_EAP=y
# EAP Re-authentication Protocol (ERP) in integrated EAP server
#CONFIG_ERP=y
# EAP-MD5 for the integrated EAP server
# EAP-MD5 for the integrated EAP server
#CONFIG_EAP_MD5=y
#CONFIG_EAP_MD5=y
@ -87,6 +97,9 @@ CONFIG_PEERKEY=y
# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y
#CONFIG_EAP_PSK=y
# EAP-pwd for the integrated EAP server (secure authentication with a password)
#CONFIG_EAP_PWD=y
# EAP-SAKE for the integrated EAP server
# EAP-SAKE for the integrated EAP server
#CONFIG_EAP_SAKE=y
#CONFIG_EAP_SAKE=y
@ -96,16 +109,17 @@ CONFIG_PEERKEY=y
#CONFIG_EAP_GPSK_SHA256=y
#CONFIG_EAP_GPSK_SHA256=y
# EAP-FAST for the integrated EAP server
# EAP-FAST for the integrated EAP server
# Note: Default OpenSSL package does not include support for all the
# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
# to add the needed functions.
#CONFIG_EAP_FAST=y
#CONFIG_EAP_FAST=y
# Wi-Fi Protected Setup (WPS)
# Wi-Fi Protected Setup (WPS)
#CONFIG_WPS=y
#CONFIG_WPS=y
# Enable UPnP support for external WPS Registrars
# Enable UPnP support for external WPS Registrars
#CONFIG_WPS_UPNP=y
#CONFIG_WPS_UPNP=y
# Enable WPS support with NFC config method
#CONFIG_WPS_NFC=y
# EAP-IKEv2
# EAP-IKEv2
#CONFIG_EAP_IKEV2=y
#CONFIG_EAP_IKEV2=y
@ -113,6 +127,9 @@ CONFIG_PEERKEY=y
# Trusted Network Connect (EAP-TNC)
# Trusted Network Connect (EAP-TNC)
#CONFIG_EAP_TNC=y
#CONFIG_EAP_TNC=y
# EAP-EKE for the integrated EAP server
#CONFIG_EAP_EKE=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
# a file that usually has extension .p12 or .pfx)
#CONFIG_PKCS12=y
#CONFIG_PKCS12=y
@ -128,23 +145,43 @@ CONFIG_PEERKEY=y
#CONFIG_IEEE80211R=y
#CONFIG_IEEE80211R=y
# Use the hostapd's IEEE 802.11 authentication (ACL), but without
# Use the hostapd's IEEE 802.11 authentication (ACL), but without
# the IEEE 802.11 Management capability (e.g. FreeBSD/net80211)
# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
#CONFIG_DRIVER_RADIUS_ACL=y
#CONFIG_DRIVER_RADIUS_ACL=y
# IEEE 802.11n (High Throughput) support
# IEEE 802.11n (High Throughput) support
CONFIG_IEEE80211N=y
CONFIG_IEEE80211N=y
# Wireless Network Management (IEEE Std 802.11v-2011)
# Note: This is experimental and not complete implementation.
#CONFIG_WNM=y
# IEEE 802.11ac (Very High Throughput) support
# IEEE 802.11ac (Very High Throughput) support
CONFIG_IEEE80211AC=y
CONFIG_IEEE80211AC=y
# IEEE 802.11ax HE support
# Note: This is experimental and work in progress. The definitions are still
# subject to change and this should not be expected to interoperate with the
# final IEEE 802.11ax version.
#CONFIG_IEEE80211AX=y
# Remove debugging code that is printing out debug messages to stdout.
# Remove debugging code that is printing out debug messages to stdout.
# This can be used to reduce the size of the hostapd considerably if debugging
# This can be used to reduce the size of the hostapd considerably if debugging
# code is not needed.
# code is not needed.
#CONFIG_NO_STDOUT_DEBUG=y
#CONFIG_NO_STDOUT_DEBUG=y
# Add support for writing debug log to a file: -f /tmp/hostapd.log
# Disabled by default.
#CONFIG_DEBUG_FILE=y
# Send debug messages to syslog instead of stdout
# Send debug messages to syslog instead of stdout
CONFIG_DEBUG_SYSLOG=y
CONFIG_DEBUG_SYSLOG=y
# Add support for sending all debug messages (regardless of debug verbosity)
# to the Linux kernel tracing facility. This helps debug the entire stack by
# making it easy to record everything happening from the driver up into the
# same file, e.g., using trace-cmd.
#CONFIG_DEBUG_LINUX_TRACING=y
# Remove support for RADIUS accounting
# Remove support for RADIUS accounting
CONFIG_NO_ACCOUNTING=y
CONFIG_NO_ACCOUNTING=y
@ -154,9 +191,190 @@ CONFIG_NO_RADIUS=y
# Remove support for VLANs
# Remove support for VLANs
#CONFIG_NO_VLAN=y
#CONFIG_NO_VLAN=y
CONFIG_TLS=internal
# Enable support for fully dynamic VLANs. This enables hostapd to
# automatically create bridge and VLAN interfaces if necessary.
#CONFIG_FULL_DYNAMIC_VLAN=y
CONFIG_NO_RANDOM_POOL=y
# Use netlink-based kernel API for VLAN operations instead of ioctl()
# Note: This requires libnl 3.1 or newer.
#CONFIG_VLAN_NETLINK=y
# Remove support for dumping internal state through control interface commands
# This can be used to reduce binary size at the cost of disabling a debugging
# option.
CONFIG_NO_DUMP_STATE=y
CONFIG_NO_DUMP_STATE=y
# Enable tracing code for developer debugging
# This tracks use of memory allocations and other registrations and reports
# incorrect use with a backtrace of call (or allocation) location.
#CONFIG_WPA_TRACE=y
# For BSD, comment out these.
#LIBS += -lexecinfo
#LIBS_p += -lexecinfo
#LIBS_c += -lexecinfo
# Use libbfd to get more details for developer debugging
# This enables use of libbfd to get more detailed symbols for the backtraces
# generated by CONFIG_WPA_TRACE=y.
#CONFIG_WPA_TRACE_BFD=y
# For BSD, comment out these.
#LIBS += -lbfd -liberty -lz
#LIBS_p += -lbfd -liberty -lz
#LIBS_c += -lbfd -liberty -lz
# hostapd depends on strong random number generation being available from the
# operating system. os_get_random() function is used to fetch random data when
# needed, e.g., for key generation. On Linux and BSD systems, this works by
# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
# properly initialized before hostapd is started. This is important especially
# on embedded devices that do not have a hardware random number generator and
# may by default start up with minimal entropy available for random number
# generation.
#
# As a safety net, hostapd is by default trying to internally collect
# additional entropy for generating random data to mix in with the data
# fetched from the OS. This by itself is not considered to be very strong, but
# it may help in cases where the system pool is not initialized properly.
# However, it is very strongly recommended that the system pool is initialized
# with enough entropy either by using hardware assisted random number
# generator or by storing state over device reboots.
#
# hostapd can be configured to maintain its own entropy store over restarts to
# enhance random number generation. This is not perfect, but it is much more
# secure than using the same sequence of random numbers after every reboot.
# This can be enabled with -e<entropy file> command line option. The specified
# file needs to be readable and writable by hostapd.
#
# If the os_get_random() is known to provide strong random data (e.g., on
# Linux/BSD, the board in question is known to have reliable source of random
# data from /dev/urandom), the internal hostapd random pool can be disabled.
# This will save some in binary size and CPU use. However, this should only be
# considered for builds that are known to be used on devices that meet the
# requirements described above.
CONFIG_NO_RANDOM_POOL=y
# Should we use poll instead of select? Select is used by default.
#CONFIG_ELOOP_POLL=y
# Should we use epoll instead of select? Select is used by default.
#CONFIG_ELOOP_EPOLL=y
# Should we use kqueue instead of select? Select is used by default.
#CONFIG_ELOOP_KQUEUE=y
# Select TLS implementation
# openssl = OpenSSL (default)
# gnutls = GnuTLS
# internal = Internal TLSv1 implementation (experimental)
# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
# none = Empty template
CONFIG_TLS=internal
# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
# can be enabled to get a stronger construction of messages when block ciphers
# are used.
#CONFIG_TLSV11=y
# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
# can be enabled to enable use of stronger crypto algorithms.
#CONFIG_TLSV12=y
# Select which ciphers to use by default with OpenSSL if the user does not
# specify them.
#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
# If CONFIG_TLS=internal is used, additional library and include paths are
# needed for LibTomMath. Alternatively, an integrated, minimal version of
# LibTomMath can be used. See beginning of libtommath.c for details on benefits
# and drawbacks of this option.
#CONFIG_INTERNAL_LIBTOMMATH=y
#ifndef CONFIG_INTERNAL_LIBTOMMATH
#LTM_PATH=/usr/src/libtommath-0.39
#CFLAGS += -I$(LTM_PATH)
#LIBS += -L$(LTM_PATH)
#LIBS_p += -L$(LTM_PATH)
#endif
# At the cost of about 4 kB of additional binary size, the internal LibTomMath
# can be configured to include faster routines for exptmod, sqr, and div to
# speed up DH and RSA calculation considerably
#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
# Interworking (IEEE 802.11u)
# This can be used to enable functionality to improve interworking with
# external networks.
#CONFIG_INTERWORKING=y
# Hotspot 2.0
#CONFIG_HS20=y
# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
#CONFIG_SQLITE=y
# Enable Fast Session Transfer (FST)
#CONFIG_FST=y
# Enable CLI commands for FST testing
#CONFIG_FST_TEST=y
# Testing options
# This can be used to enable some testing options (see also the example
# configuration file) that are really useful only for testing clients that
# connect to this hostapd. These options allow, for example, to drop a
# certain percentage of probe requests or auth/(re)assoc frames.
#
#CONFIG_TESTING_OPTIONS=y
# Automatic Channel Selection
# This will allow hostapd to pick the channel automatically when channel is set
# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
# similar way.
#
# Automatic selection is currently only done through initialization, later on
# we hope to do background checks to keep us moving to more ideal channels as
# time goes by. ACS is currently only supported through the nl80211 driver and
# your driver must have survey dump capability that is filled by the driver
# during scanning.
#
# You can customize the ACS survey algorithm with the hostapd.conf variable
# acs_num_scans.
#
# Supported ACS drivers:
# * ath9k
# * ath5k
# * ath10k
#
# For more details refer to:
# http://wireless.kernel.org/en/users/Documentation/acs
#
#CONFIG_ACS=y
# Multiband Operation support
# These extentions facilitate efficient use of multiple frequency bands
# available to the AP and the devices that may associate with it.
#CONFIG_MBO=y
# Client Taxonomy
# Has the AP retain the Probe Request and (Re)Association Request frames from
# a client, from which a signature can be produced which can identify the model
# of client device like "Nexus 6P" or "iPhone 5s".
#CONFIG_TAXONOMY=y
# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
# Note: This is an experimental and not yet complete implementation. This
# should not be enabled for production use.
#CONFIG_FILS=y
# FILS shared key authentication with PFS
#CONFIG_FILS_SK_PFS=y
# Include internal line edit mode in hostapd_cli. This can be used to provide
# limited command line editing and history support.
#CONFIG_WPA_CLI_EDIT=y
# Opportunistic Wireless Encryption (OWE)
# Experimental implementation of draft-harkins-owe-07.txt
#CONFIG_OWE=y
# uBus IPC/RPC System
# Services can connect to the bus and provide methods
# that can be called by other services or clients.
CONFIG_UBUS=y
CONFIG_UBUS=y