Board support patch for BT Home Hub 2B Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 40370master
parent
469b8297fa
commit
709cab91d2
@ -0,0 +1,275 @@ |
||||
/dts-v1/; |
||||
|
||||
/include/ "danube.dtsi" |
||||
|
||||
/ { |
||||
model = "BTHOMEHUBV2B - BT Home Hub 2B"; /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */ |
||||
|
||||
chosen { |
||||
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit rootfstype=squashfs,jffs2"; |
||||
}; |
||||
|
||||
memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */ |
||||
reg = <0x0 0x4000000>; |
||||
}; |
||||
|
||||
sram@1F000000 { |
||||
vmmc@107000 { |
||||
status = "okay"; |
||||
gpios = <&gpio 31 0>; |
||||
}; |
||||
}; |
||||
|
||||
fpi@10000000 { |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
localbus@0 { |
||||
#address-cells = <2>; |
||||
#size-cells = <1>; |
||||
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ |
||||
1 0 0x4000000 0x4000010>; /* addsel1 */ |
||||
compatible = "lantiq,localbus", "simple-bus"; |
||||
|
||||
nor-boot@0 { /* NOR Flash: Spansion S29AL004D 512KB */ |
||||
compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */ |
||||
lantiq,cs = <0>; |
||||
bank-width = <2>; |
||||
reg = <0 0x0 0x80000>; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
|
||||
partition@0 { |
||||
label = "uboot"; |
||||
reg = <0x00000 0x40000>; /* 256KB */ |
||||
}; |
||||
|
||||
partition@40000 { |
||||
label = "uboot_env"; |
||||
reg = <0x40000 0x10000>; /* 64KB */ |
||||
}; |
||||
|
||||
partition@50000 { |
||||
label = "rg_conf_1"; |
||||
reg = <0x50000 0x10000>; |
||||
}; |
||||
|
||||
partition@60000 { |
||||
label = "rg_conf_2"; |
||||
reg = <0x60000 0x10000>; |
||||
}; |
||||
|
||||
partition@70000 { |
||||
label = "rg_conf_factory"; |
||||
reg = <0x70000 0x10000>; |
||||
}; |
||||
}; |
||||
|
||||
nand-parts@0 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */ |
||||
compatible = "gen_nand", "lantiq,nand-xway"; |
||||
lantiq,cs = <1>; |
||||
bank-width = <2>; |
||||
reg = <1 0x0 0x2000000 >; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
req-mask = <0x1>; /* PCI request lines to mask during NAND access */ |
||||
|
||||
ath9k_cal: partition@0 { |
||||
label = "art"; /* Atheros 9160 wifi b/g/n radio EEPROM */ |
||||
reg = <0x00000 0x4000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@4000 { |
||||
label = "firmware"; |
||||
reg = <0x4000 0x1FFC000>; |
||||
}; |
||||
|
||||
}; |
||||
|
||||
|
||||
ath9k_eep { |
||||
compatible = "ath9k,eeprom"; |
||||
ath,eep-flash = <&ath9k_cal 0x0000>; |
||||
ath,mac-increment = <1>; |
||||
ath,pci-slot = <14>; |
||||
ath,eep-endian; |
||||
}; |
||||
}; |
||||
|
||||
gpio: pinmux@E100B10 { |
||||
compatible = "lantiq,pinctrl-xway"; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&state_default>; |
||||
|
||||
#gpio-cells = <2>; |
||||
gpio-controller; |
||||
reg = <0xE100B10 0xA0>; |
||||
|
||||
state_default: pinmux { |
||||
stp { |
||||
lantiq,groups = "stp"; |
||||
lantiq,function = "stp"; |
||||
lantiq,output = <1>; |
||||
lantiq,open-drain = <0>; |
||||
lantiq,pull = <0>; |
||||
}; |
||||
nand_out { |
||||
lantiq,groups = "nand cle", "nand ale"; |
||||
lantiq,function = "ebu"; |
||||
lantiq,output = <1>; |
||||
lantiq,open-drain = <0>; |
||||
lantiq,pull = <0>; |
||||
}; |
||||
nand_cs1 { |
||||
lantiq,groups = "nand cs1"; |
||||
lantiq,function = "ebu"; |
||||
lantiq,open-drain = <0>; |
||||
lantiq,pull = <0>; |
||||
}; |
||||
exin { |
||||
lantiq,groups = "exin1"; |
||||
lantiq,function = "exin"; |
||||
}; |
||||
pci_in { |
||||
lantiq,groups = "req1"; |
||||
lantiq,function = "pci"; |
||||
lantiq,output = <0>; |
||||
lantiq,open-drain = <1>; |
||||
lantiq,pull = <2>; |
||||
}; |
||||
pci_out { |
||||
lantiq,groups = "gnt1"; |
||||
lantiq,function = "pci"; |
||||
lantiq,output = <1>; |
||||
lantiq,open-drain = <0>; |
||||
lantiq,pull = <0>; |
||||
}; |
||||
|
||||
pci_rst { |
||||
lantiq,pins = "io21"; |
||||
lantiq,output = <1>; |
||||
lantiq,open-drain = <0>; |
||||
}; |
||||
|
||||
btn_in { |
||||
lantiq,pins = "io2", "io15", "io22"; |
||||
lantiq,output = <0>; |
||||
lantiq,open-drain = <1>; |
||||
lantiq,pull = <2>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
etop@E180000 { |
||||
compatible = "lantiq,etop-xway"; |
||||
reg = <0xE180000 0x40000>; |
||||
interrupt-parent = <&icu0>; |
||||
interrupts = <73 78>; |
||||
phy-mode = "rmii"; |
||||
mac-address = [ 00 11 22 33 44 55 ]; |
||||
}; |
||||
|
||||
ifxhcd@E101000 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
stp0: stp@E100BB0 { |
||||
status = "okay"; |
||||
#gpio-cells = <2>; |
||||
compatible = "lantiq,gpio-stp-xway"; |
||||
gpio-controller; |
||||
reg = <0xE100BB0 0x40>; |
||||
|
||||
lantiq,shadow = <0xfff>; |
||||
lantiq,groups = <0x3>; |
||||
}; |
||||
|
||||
pci@E105400 { |
||||
status = "okay"; |
||||
lantiq,bus-clock = <33333333>; |
||||
interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
||||
interrupt-map = <0x7000 0 0 1 &icu0 30 1>; |
||||
gpio-reset = <&gpio 21 0>; |
||||
req-mask = <0x1>; /* GNT1 */ |
||||
}; |
||||
|
||||
}; |
||||
|
||||
gpio-keys-polled { |
||||
compatible = "gpio-keys-polled"; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
poll-interval = <100>; |
||||
|
||||
reset { |
||||
label = "reset"; |
||||
gpios = <&gpio 2 1>; |
||||
linux,code = <0x198>; |
||||
}; |
||||
findhandset { |
||||
label = "findhandset"; |
||||
gpios = <&gpio 15 1>; |
||||
linux,code = <0x101>; |
||||
}; |
||||
wps { |
||||
label = "wps"; |
||||
gpios = <&gpio 22 1>; |
||||
linux,code = <0x211>; |
||||
}; |
||||
}; |
||||
|
||||
gpio-leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
upgrading-orange { |
||||
label = "soc:orange:upgrading"; |
||||
gpios = <&stp0 5 0>; |
||||
}; |
||||
|
||||
phone-orange { |
||||
label = "soc:orange:phone"; |
||||
gpios = <&stp0 6 0>; |
||||
}; |
||||
phone-blue { |
||||
label = "soc:blue:phone"; |
||||
gpios = <&stp0 7 0>; |
||||
}; |
||||
|
||||
wireless-orange { |
||||
label = "soc:orange:wireless"; |
||||
gpios = <&stp0 8 0>; |
||||
}; |
||||
wireless-blue { |
||||
label = "soc:blue:wireless"; |
||||
gpios = <&stp0 9 0>; |
||||
}; |
||||
|
||||
broadband-red { |
||||
label = "soc:red:broadband"; |
||||
gpios = <&stp0 10 0>; |
||||
}; |
||||
broadband-orange { |
||||
label = "soc:orange:broadband"; |
||||
gpios = <&stp0 11 0>; |
||||
}; |
||||
broadband-blue { |
||||
label = "soc:blue:broadband"; |
||||
gpios = <&stp0 12 0>; |
||||
}; |
||||
|
||||
power-red { |
||||
label = "soc:red:power"; |
||||
gpios = <&stp0 13 0>; |
||||
}; |
||||
power-orange { |
||||
label = "soc:orange:power"; |
||||
gpios = <&stp0 14 0>; |
||||
}; |
||||
power-blue { |
||||
label = "soc:blue:power"; |
||||
gpios = <&stp0 15 0>; |
||||
}; |
||||
}; |
||||
|
||||
}; |
||||
|
@ -0,0 +1,12 @@ |
||||
define Profile/BTHOMEHUBV2B |
||||
NAME:=BT Home Hub 2B
|
||||
PACKAGES:=kmod-ltq-hcd-danube kmod-ledtrig-usbdev \
|
||||
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
||||
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
||||
kmod-ltq-deu-danube \
|
||||
ltq-adsl-app ppp-mod-pppoa \
|
||||
kmod-ath9k wpad-mini \
|
||||
swconfig
|
||||
endef |
||||
|
||||
$(eval $(call Profile,BTHOMEHUBV2B)) |
Loading…
Reference in new issue