Kimax U-25AWF-H1 is is a 2,5" HDD Enclosure with Wi-Fi/Eth conection and battery, based on MediaTek MT7620A. Patch rewritten from: https://forum.openwrt.org/viewtopic.php?pid=305643 Specification: - MT7620A CPU - 64 MB of RAM - 16 MB of FLASH - 802.11bgn WiFi - 1x 10/100 Mbps Ethernet - USB 2.0 Host - UART for serial console Flash instruction: 1. Download lede-ramips-mt7620-u25awf-h1-squashfs-sysupgrade.bin 2. Open webinterface a upgrade 3. After boot connect via ethernet to ip 192.168.1.1 Signed-off-by: Daniel Kucera <daniel.kucera@gmail.com> [fix reset button gpio, don't add a lan/wan vlan config for single port board, add -H1 suffix do make sure that this revision of the board is supported/tested] Signed-off-by: Mathias Kresin <dev@kresin.me>master
parent
f2b7d9dc1c
commit
6f008af3f0
@ -0,0 +1,106 @@ |
||||
/dts-v1/; |
||||
|
||||
#include "mt7620a.dtsi" |
||||
|
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
/{ |
||||
compatible = "kimax,u25awf-h1","ralink,mt7620a-soc"; |
||||
model = "Kimax U25AWF-H1"; |
||||
|
||||
gpio-keys-polled { |
||||
compatible = "gpio-keys-polled"; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
poll-interval = <20>; |
||||
|
||||
reset { |
||||
label = "reset"; |
||||
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; |
||||
linux,code = <KEY_RESTART>; |
||||
}; |
||||
}; |
||||
|
||||
gpio-leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
wifi { |
||||
label = "u25awf:red:wifi"; |
||||
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
lan { |
||||
label = "u25awf:green:lan"; |
||||
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&gpio2 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&gpio3 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&spi0 { |
||||
status = "okay"; |
||||
|
||||
m25p80@0 { |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
compatible = "jedec,spi-nor"; |
||||
reg = <0>; |
||||
spi-max-frequency = <10000000>; |
||||
|
||||
partition@0 { |
||||
label = "u-boot"; |
||||
reg = <0x0 0x30000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@30000 { |
||||
label = "u-boot-env"; |
||||
reg = <0x30000 0x10000>; |
||||
read-only; |
||||
}; |
||||
|
||||
factory: partition@40000 { |
||||
label = "factory"; |
||||
reg = <0x40000 0x10000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@50000 { |
||||
label = "firmware"; |
||||
reg = <0x50000 0xfb0000>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&ehci { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&ohci { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
ðernet { |
||||
mtd-mac-address = <&factory 0x4>; |
||||
}; |
||||
|
||||
&wmac { |
||||
ralink,mtd-eeprom = <&factory 0>; |
||||
}; |
||||
|
||||
&pinctrl { |
||||
state_default: pinctrl0 { |
||||
default { |
||||
ralink,group = "uartf", "ephy", "wled"; |
||||
ralink,function = "gpio"; |
||||
}; |
||||
}; |
||||
}; |
Loading…
Reference in new issue