Hardware
--------
SoC: Qualcomm IPQ4019
RAM: 256M DDR3
FLASH: 128M NAND
WiFi: 2T2R IPQ4019 bgn
2T2R IPQ4019 a/n/ac
ETH: Atheros AR8033 RGMII PHY
BTN: 1x Connect (WPS)
LED: Power (green/red/yellow)
Installation
------------
1. Grab the uboot for the Device from the 'u-boot-fritz1200'
subdirectory. Place it in the same directory as the 'eva_ramboot.py'
script. It is located in the 'scripts/flashing' subdirectory of the
OpenWRT tree.
2. Assign yourself the IP address 192.168.178.10/24. Connect your
Computer to one of the boxes LAN ports.
3. Connect Power to the Box. As soon as the LAN port of your computer
shows link, load the U-Boot to the box using following command.
> ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz1200.bin
4. The U-Boot will now start. Now assign yourself the IP address
192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP
server root directory and rename it to 'FRITZ1200.bin'.
5. The Box will now boot OpenWRT from RAM. This can take up to two
minutes.
6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using
scp. SSH into the Box and first write the Bootloader to both previous
kernel partitions.
> mtd write /path/to/uboot-fritz1200.bin uboot0
> mtd write /path/to/uboot-fritz1200.bin uboot1
7. Remove the AVM filesystem partitions to make room for our kernel +
rootfs + overlayfs.
> ubirmvol /dev/ubi0 --name=avm_filesys_0
> ubirmvol /dev/ubi0 --name=avm_filesys_1
8. Flash OpenWRT peristently using sysupgrade.
> sysupgrade -n /path/to/openwrt-sysupgrade.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 7f187229a8e9b7966248b1e024217e07a9fc3e50)
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
master
David Bauer
5 years ago
committed by
Matthias Schiffer
parent
63b1e8f8d2
commit
6160f773fe
@ -0,0 +1,262 @@ |
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||
|
||||
#include "qcom-ipq4019.dtsi" |
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/input/input.h> |
||||
#include <dt-bindings/soc/qcom,tcsr.h> |
||||
|
||||
/ { |
||||
model = "AVM FRITZ!Repeater 1200"; |
||||
compatible = "avm,fritzrepeater-1200"; |
||||
|
||||
aliases { |
||||
led-boot = &power_green; |
||||
led-failsafe = &power_red; |
||||
led-running = &power_green; |
||||
led-upgrade = &power_red; |
||||
}; |
||||
|
||||
soc { |
||||
mdio@90000 { |
||||
status = "okay"; |
||||
pinctrl-0 = <&mdio_pins>; |
||||
pinctrl-names = "default"; |
||||
}; |
||||
|
||||
tcsr@1949000 { |
||||
compatible = "qcom,tcsr"; |
||||
reg = <0x1949000 0x100>; |
||||
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; |
||||
}; |
||||
|
||||
ess_tcsr@1953000 { |
||||
compatible = "qcom,tcsr"; |
||||
reg = <0x1953000 0x1000>; |
||||
qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>; |
||||
}; |
||||
|
||||
tcsr@1957000 { |
||||
compatible = "qcom,tcsr"; |
||||
reg = <0x1957000 0x100>; |
||||
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; |
||||
}; |
||||
|
||||
crypto@8e3a000 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
watchdog@b017000 { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
ess-switch@c000000 { |
||||
switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ |
||||
switch_lan_bmp = <0x0>; /* lan port bitmap */ |
||||
switch_wan_bmp = <0x10>; /* wan port bitmap */ |
||||
}; |
||||
|
||||
edma@c080000 { |
||||
status = "okay"; |
||||
phy-mode = "rgmii-rxid"; |
||||
qcom,num_gmac = <1>; |
||||
qcom,single-phy; |
||||
}; |
||||
}; |
||||
|
||||
key { |
||||
compatible = "gpio-keys"; |
||||
|
||||
wps { |
||||
label = "WPS button"; |
||||
gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; |
||||
linux,code = <KEY_WPS_BUTTON>; |
||||
}; |
||||
}; |
||||
|
||||
leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
power_red: power_red { |
||||
label = "fritzwlan-1200:red:power"; |
||||
gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
power_green: power_green { |
||||
label = "fritzwlan-1200:green:power"; |
||||
gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
power_yellow { |
||||
label = "fritzwlan-1200:yellow:power"; |
||||
gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&tlmm { |
||||
serial_0_pins: serial_pinmux { |
||||
mux { |
||||
pins = "gpio16", "gpio17"; |
||||
function = "blsp_uart0"; |
||||
bias-disable; |
||||
}; |
||||
}; |
||||
|
||||
nand_pins: nand_pins { |
||||
pullups { |
||||
pins = "gpio53", "gpio58", "gpio59"; |
||||
function = "qpic"; |
||||
bias-pull-up; |
||||
}; |
||||
|
||||
pulldowns { |
||||
pins = "gpio54", "gpio55", "gpio56", |
||||
"gpio57", "gpio60", "gpio61", |
||||
"gpio62", "gpio63", "gpio64", |
||||
"gpio65", "gpio66", "gpio67", |
||||
"gpio68", "gpio69"; |
||||
function = "qpic"; |
||||
bias-pull-down; |
||||
}; |
||||
}; |
||||
|
||||
mdio_pins: mdio_pinmux { |
||||
mux_1 { |
||||
pins = "gpio6"; |
||||
function = "mdio"; |
||||
bias-pull-up; |
||||
}; |
||||
mux_2 { |
||||
pins = "gpio7"; |
||||
function = "mdc"; |
||||
bias-pull-up; |
||||
}; |
||||
}; |
||||
|
||||
phy-reset { |
||||
line-name = "PHY-reset"; |
||||
gpios = <19 GPIO_ACTIVE_HIGH>; |
||||
gpio-hog; |
||||
output-high; |
||||
}; |
||||
|
||||
phy-reset-2 { |
||||
line-name = "PHY-reset-2"; |
||||
gpios = <47 GPIO_ACTIVE_HIGH>; |
||||
gpio-hog; |
||||
output-high; |
||||
}; |
||||
}; |
||||
|
||||
&nand { |
||||
pinctrl-0 = <&nand_pins>; |
||||
pinctrl-names = "default"; |
||||
status = "okay"; |
||||
|
||||
nand@0 { |
||||
partitions { |
||||
compatible = "fixed-partitions"; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
|
||||
partition@0 { |
||||
label = "SBL1"; |
||||
reg = <0x0 0x80000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@80000 { |
||||
label = "MIBIB"; |
||||
reg = <0x80000 0x80000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@100000 { |
||||
label = "QSEE"; |
||||
reg = <0x100000 0x80000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@180000 { |
||||
label = "CDT"; |
||||
reg = <0x180000 0x40000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@1c0000 { |
||||
label = "QSEE_B"; |
||||
reg = <0x1c0000 0x80000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@240000 { |
||||
label = "urlader0"; |
||||
reg = <0x240000 0x40000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@280000 { |
||||
label = "urlader1"; |
||||
reg = <0x280000 0x40000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@2c0000 { |
||||
label = "nand-tffs"; |
||||
reg = <0x2c0000 0x840000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@b00000 { |
||||
/* 'kernel1' in AVM firmware */ |
||||
label = "uboot0"; |
||||
reg = <0xb00000 0x400000>; |
||||
}; |
||||
|
||||
partition@f00000 { |
||||
/* 'kernel2' in AVM firmware */ |
||||
label = "uboot1"; |
||||
reg = <0xf00000 0x400000>; |
||||
}; |
||||
|
||||
partition@1300000 { |
||||
label = "ubi"; |
||||
reg = <0x1300000 0x6d00000>; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&cryptobam { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&blsp_dma { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&blsp1_uart1 { |
||||
pinctrl-0 = <&serial_0_pins>; |
||||
pinctrl-names = "default"; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&qpic_bam { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&wifi0 { |
||||
status = "okay"; |
||||
qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200"; |
||||
}; |
||||
|
||||
&wifi1 { |
||||
status = "okay"; |
||||
qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200"; |
||||
}; |
||||
|
||||
&gmac0 { |
||||
qcom,phy_mdio_addr = <0>; |
||||
qcom,poll_required = <1>; |
||||
vlan_tag = <0 0x20>; |
||||
}; |
||||
Loading…
Reference in new issue