- SoC: MediaTek MT7628AN - Flash: 16MB (Winbond W25Q128JV) - RAM: 64MB - Serial: As marked on PCB, 3V3 logic, baudrate is 115200 - Ethernet: 3x 10/100 Mbps (switched, 2x LAN + WAN) - WIFI0: MT7628AN 2.4GHz 802.11b/g/n - WIFI1: MT7612EN 5GHz 802.11ac - Antennas: 4x external (2 per radio), non-detachable - LEDs: Programmable power-LED (two-colored, yellow/blue) Non-programmable internet-LED (shows WAN-activity) - Buttons: Reset INSTALLATION: 1. Connect to the serial port of the router and power it up. If you get a prompt asking for boot-mode, go to step 3. 2. Unplug the router after > Erasing SPI Flash... > raspi_erase: offs:20000 len:10000 occurs on the serial port. Plug the router back in. 3. At the prompt select option 2 (Load system code then write to Flash via TFTP.) 4. Enter 192.168.1.1 as the device IP and 192.168.1.2 as the Server-IP. 5. Connect your computer to LAN1 and assign it as 192.168.1.2/24. 6. Rename the sysupgrade image to test.bin and serve it via TFTP. 7. Enter test.bin on the serial console and press enter. Signed-off-by: Markus Scheck <markus@mscheck.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added mt76 compatible]master
parent
a41f474d17
commit
5ff5c9bce6
@ -0,0 +1,147 @@ |
|||||||
|
//SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include "mt7628an.dtsi" |
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h> |
||||||
|
#include <dt-bindings/input/input.h> |
||||||
|
|
||||||
|
/ { |
||||||
|
compatible = "xiaomi,mir4a-100m", "mediatek,mt7628an-soc"; |
||||||
|
model = "Xiaomi Mi Router 4A (100M Edition)"; |
||||||
|
|
||||||
|
chosen { |
||||||
|
bootargs = "console=ttyS0,115200"; |
||||||
|
}; |
||||||
|
|
||||||
|
memory@0 { |
||||||
|
device_type = "memory"; |
||||||
|
reg = <0x0 0x4000000>; |
||||||
|
}; |
||||||
|
|
||||||
|
aliases { |
||||||
|
led-boot = &power_yellow; |
||||||
|
led-failsafe = &power_yellow; |
||||||
|
led-running = &power_blue; |
||||||
|
led-upgrade = &power_yellow; |
||||||
|
}; |
||||||
|
|
||||||
|
leds { |
||||||
|
compatible = "gpio-leds"; |
||||||
|
|
||||||
|
power_blue: power_blue { |
||||||
|
label = "mir4a-100m:blue:power"; |
||||||
|
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
|
||||||
|
power_yellow: power_yellow { |
||||||
|
label = "mir4a-100m:yellow:power"; |
||||||
|
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
keys { |
||||||
|
compatible = "gpio-keys-polled"; |
||||||
|
poll-interval = <20>; |
||||||
|
|
||||||
|
reset { |
||||||
|
label = "reset"; |
||||||
|
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; |
||||||
|
linux,code = <KEY_RESTART>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&spi0 { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
flash@0 { |
||||||
|
compatible = "jedec,spi-nor"; |
||||||
|
reg = <0>; |
||||||
|
spi-max-frequency = <10000000>; |
||||||
|
|
||||||
|
partitions { |
||||||
|
compatible = "fixed-partitions"; |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
|
||||||
|
partition@0 { |
||||||
|
label = "bootloader"; |
||||||
|
reg = <0x0 0x20000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@20000 { |
||||||
|
label = "config"; |
||||||
|
reg = <0x20000 0x10000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
factory: partition@30000 { |
||||||
|
label = "factory"; |
||||||
|
reg = <0x30000 0x10000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@40000 { |
||||||
|
label = "crash"; |
||||||
|
reg = <0x40000 0x10000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@50000 { |
||||||
|
label = "cfg_bak"; |
||||||
|
reg = <0x50000 0x10000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@60000 { |
||||||
|
label = "overlay"; |
||||||
|
reg = <0x60000 0x100000>; |
||||||
|
read-only; |
||||||
|
}; |
||||||
|
|
||||||
|
partition@160000 { |
||||||
|
label = "firmware"; |
||||||
|
reg = <0x160000 0xea0000>; |
||||||
|
compatible = "denx,uimage"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&pcie { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&pcie0 { |
||||||
|
wifi@0,0 { |
||||||
|
compatible = "mediatek,mt76"; |
||||||
|
reg = <0x0000 0 0 0 0>; |
||||||
|
mediatek,mtd-eeprom = <&factory 0x8000>; |
||||||
|
ieee80211-freq-limit = <5000000 6000000>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&pinctrl { |
||||||
|
state_default: pinctrl0 { |
||||||
|
gpio { |
||||||
|
ralink,group = "gpio", "wdt", "wled_an"; |
||||||
|
ralink,function = "gpio"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
ðernet { |
||||||
|
mtd-mac-address = <&factory 0x4>; |
||||||
|
mtd-mac-address-increment = <(-1)>; |
||||||
|
}; |
||||||
|
|
||||||
|
&esw { |
||||||
|
mediatek,portmap = <0x2f>; |
||||||
|
mediatek,portdisable = <0x2a>; |
||||||
|
}; |
||||||
|
|
||||||
|
&wmac { |
||||||
|
status = "okay"; |
||||||
|
}; |
Loading…
Reference in new issue