parent
35d761c0c5
commit
5f458bf7f8
@ -0,0 +1,19 @@ |
||||
/* |
||||
* Copyright 2017 Gateworks Corporation |
||||
* |
||||
* The code contained herein is licensed under the GNU General Public |
||||
* License. You may obtain a copy of the GNU General Public License |
||||
* Version 2 or later at the following locations: |
||||
* |
||||
* http://www.opensource.org/licenses/gpl-license.html |
||||
* http://www.gnu.org/copyleft/gpl.html |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
#include "imx6dl.dtsi" |
||||
#include "imx6qdl-gw5904.dtsi" |
||||
|
||||
/ { |
||||
model = "Gateworks Ventana i.MX6 DualLite/Solo GW5904"; |
||||
compatible = "gw,imx6dl-gw5904", "gw,ventana", "fsl,imx6dl"; |
||||
}; |
@ -0,0 +1,23 @@ |
||||
/* |
||||
* Copyright 2017 Gateworks Corporation |
||||
* |
||||
* The code contained herein is licensed under the GNU General Public |
||||
* License. You may obtain a copy of the GNU General Public License |
||||
* Version 2 or later at the following locations: |
||||
* |
||||
* http://www.opensource.org/licenses/gpl-license.html |
||||
* http://www.gnu.org/copyleft/gpl.html |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
#include "imx6q.dtsi" |
||||
#include "imx6qdl-gw5904.dtsi" |
||||
|
||||
/ { |
||||
model = "Gateworks Ventana i.MX6 Dual/Quad GW5904"; |
||||
compatible = "gw,imx6q-gw5904", "gw,ventana", "fsl,imx6q"; |
||||
}; |
||||
|
||||
&sata { |
||||
status = "okay"; |
||||
}; |
@ -0,0 +1,629 @@ |
||||
/* |
||||
* Copyright 2017 Gateworks Corporation |
||||
* |
||||
* The code contained herein is licensed under the GNU General Public |
||||
* License. You may obtain a copy of the GNU General Public License |
||||
* Version 2 or later at the following locations: |
||||
* |
||||
* http://www.opensource.org/licenses/gpl-license.html |
||||
* http://www.gnu.org/copyleft/gpl.html |
||||
*/ |
||||
|
||||
#include <dt-bindings/gpio/gpio.h> |
||||
|
||||
/ { |
||||
/* these are used by bootloader for disabling nodes */ |
||||
aliases { |
||||
led0 = &led0; |
||||
led1 = &led1; |
||||
led2 = &led2; |
||||
usb0 = &usbh1; |
||||
usb1 = &usbotg; |
||||
}; |
||||
|
||||
chosen { |
||||
bootargs = "console=ttymxc1,115200"; |
||||
}; |
||||
|
||||
backlight { |
||||
compatible = "pwm-backlight"; |
||||
pwms = <&pwm4 0 5000000>; |
||||
brightness-levels = <0 4 8 16 32 64 128 255>; |
||||
default-brightness-level = <7>; |
||||
}; |
||||
|
||||
leds { |
||||
compatible = "gpio-leds"; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_gpio_leds>; |
||||
|
||||
led0: user1 { |
||||
label = "user1"; |
||||
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ |
||||
default-state = "on"; |
||||
linux,default-trigger = "heartbeat"; |
||||
}; |
||||
|
||||
led1: user2 { |
||||
label = "user2"; |
||||
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
led2: user3 { |
||||
label = "user3"; |
||||
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ |
||||
default-state = "off"; |
||||
}; |
||||
}; |
||||
|
||||
gpio_keys { |
||||
compatible = "gpio-keys"; |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
|
||||
user_pb { |
||||
label = "user_pb"; |
||||
|
||||
gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; |
||||
linux,code = <256>; |
||||
}; |
||||
}; |
||||
|
||||
memory { |
||||
reg = <0x10000000 0x40000000>; |
||||
}; |
||||
|
||||
pps { |
||||
compatible = "pps-gpio"; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_pps>; |
||||
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
reg_1p0v: regulator-1p0v { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "1P0V"; |
||||
regulator-min-microvolt = <1000000>; |
||||
regulator-max-microvolt = <1000000>; |
||||
regulator-always-on; |
||||
}; |
||||
|
||||
reg_3p3v: regulator-3p3v { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "3P3V"; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-always-on; |
||||
}; |
||||
|
||||
reg_usb_h1_vbus: regulator-usb-h1-vbus { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "usb_h1_vbus"; |
||||
regulator-min-microvolt = <5000000>; |
||||
regulator-max-microvolt = <5000000>; |
||||
regulator-always-on; |
||||
}; |
||||
|
||||
reg_usb_otg_vbus: regulator-usb-otg-vbus { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "usb_otg_vbus"; |
||||
regulator-min-microvolt = <5000000>; |
||||
regulator-max-microvolt = <5000000>; |
||||
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; |
||||
enable-active-high; |
||||
}; |
||||
|
||||
dsa { |
||||
compatible = "marvell,dsa"; |
||||
#address-cells = <2>; |
||||
#size-cells = <0>; |
||||
|
||||
dsa,ethernet = <&fec>; |
||||
dsa,mii-bus = <&mdio>; |
||||
|
||||
switch@0 { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
reg = <0 0>; /* MDIO address 0, switch 0 in tree */ |
||||
|
||||
port@0 { |
||||
reg = <0>; |
||||
label = "lan4"; |
||||
}; |
||||
|
||||
port@1 { |
||||
reg = <1>; |
||||
label = "lan3"; |
||||
}; |
||||
|
||||
port@2 { |
||||
reg = <2>; |
||||
label = "lan2"; |
||||
}; |
||||
|
||||
port@3 { |
||||
reg = <3>; |
||||
label = "lan1"; |
||||
}; |
||||
|
||||
port@5 { |
||||
reg = <5>; |
||||
label = "cpu"; |
||||
fixed-link { |
||||
speed = <1000>; |
||||
full-duplex; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&clks { |
||||
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, |
||||
<&clks IMX6QDL_CLK_LDB_DI1_SEL>; |
||||
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, |
||||
<&clks IMX6QDL_CLK_PLL3_USB_OTG>; |
||||
}; |
||||
|
||||
&fec { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_enet>; |
||||
phy-mode = "rgmii-id"; |
||||
status = "okay"; |
||||
|
||||
mdio: mdio { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
}; |
||||
}; |
||||
|
||||
&i2c1 { |
||||
clock-frequency = <100000>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_i2c1>; |
||||
status = "okay"; |
||||
|
||||
eeprom1: eeprom@50 { |
||||
compatible = "atmel,24c02"; |
||||
reg = <0x50>; |
||||
pagesize = <16>; |
||||
}; |
||||
|
||||
eeprom2: eeprom@51 { |
||||
compatible = "atmel,24c02"; |
||||
reg = <0x51>; |
||||
pagesize = <16>; |
||||
}; |
||||
|
||||
eeprom3: eeprom@52 { |
||||
compatible = "atmel,24c02"; |
||||
reg = <0x52>; |
||||
pagesize = <16>; |
||||
}; |
||||
|
||||
eeprom4: eeprom@53 { |
||||
compatible = "atmel,24c02"; |
||||
reg = <0x53>; |
||||
pagesize = <16>; |
||||
}; |
||||
|
||||
gsc: gsc@20 { |
||||
compatible = "gw,gsc"; |
||||
reg = <0x20>; |
||||
interrupt-parent = <&gpio1>; |
||||
interrupts = <4 1>; |
||||
interrupt-controller; |
||||
#interrupt-cells = <1>; |
||||
|
||||
/* GSC watchdog */ |
||||
watchdog { |
||||
compatible = "gw,gsc_wdt"; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
/* Linux input events from GSC interrupt events */ |
||||
input { |
||||
compatible = "gw,gsc_input"; |
||||
interrupt-parent = <&gsc>; |
||||
interrupts = <0 1 2 5 7>; |
||||
interrupt-names = "button", "key-erased", "eeprom-wp", "tamper", "button-held"; |
||||
status = "okay"; |
||||
}; |
||||
}; |
||||
|
||||
gsc_gpio: pca9555@23 { |
||||
compatible = "nxp,pca9555"; |
||||
reg = <0x23>; |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
interrupt-parent = <&gsc>; |
||||
interrupts = <4>; |
||||
}; |
||||
|
||||
gsc_hwmon: hwmon@29 { |
||||
compatible = "gw,gsc_hwmon"; |
||||
reg = <0x29>; |
||||
}; |
||||
|
||||
gsc_rtc: ds1672@68 { |
||||
compatible = "dallas,ds1672"; |
||||
reg = <0x68>; |
||||
}; |
||||
}; |
||||
|
||||
&i2c2 { |
||||
clock-frequency = <100000>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_i2c2>; |
||||
status = "okay"; |
||||
|
||||
/* LSM9DS1 magnetic sensor */ |
||||
lsm9ds1-m@0x1c { |
||||
compatible = "st,lsm9ds1-mag"; |
||||
reg = <0x1C>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_imu_mag>; |
||||
gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; /* IRQ */ |
||||
rot-matrix = /bits/ 16 <(1) (0) (0) |
||||
(0) (1) (0) |
||||
(0) (0) (1)>; |
||||
poll-interval = <100>; |
||||
min-interval = <13>; |
||||
fs-range = <0>; |
||||
}; |
||||
|
||||
/* LSM9DS1 accelerometer/gyroscope sensor */ |
||||
lsm9ds1-ag@0x6a { |
||||
compatible = "st,lsm9ds1-acc-gyr"; |
||||
reg = <0x6A>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_imu_acc>; |
||||
gpios = <&gpio4 18 GPIO_ACTIVE_LOW>, /* INT1 */ |
||||
<&gpio4 19 GPIO_ACTIVE_LOW>; /* INT2 */ |
||||
rot-matrix = /bits/ 16 <(1) (0) (0) |
||||
(0) (1) (0) |
||||
(0) (0) (1)>; |
||||
g-poll-interval = <100>; |
||||
g-min-interval = <2>; |
||||
g-fs-range = <0>; |
||||
x-poll-interval = <100>; |
||||
x-min-interval = <1>; |
||||
x-fs-range = <0>; |
||||
aa-filter-bw = <0>; |
||||
}; |
||||
}; |
||||
|
||||
&i2c3 { |
||||
clock-frequency = <100000>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_i2c3>; |
||||
status = "okay"; |
||||
|
||||
touchscreen: egalax_ts@04 { |
||||
compatible = "eeti,egalax_ts"; |
||||
reg = <0x04>; |
||||
interrupt-parent = <&gpio1>; |
||||
interrupts = <11 IRQ_TYPE_EDGE_FALLING>; |
||||
wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
}; |
||||
|
||||
&ldb { |
||||
status = "okay"; |
||||
|
||||
lvds-channel@0 { |
||||
fsl,data-mapping = "spwg"; |
||||
fsl,data-width = <18>; |
||||
status = "okay"; |
||||
|
||||
display-timings { |
||||
native-mode = <&timing0>; |
||||
timing0: hsd100pxn1 { |
||||
clock-frequency = <65000000>; |
||||
hactive = <1024>; |
||||
vactive = <768>; |
||||
hback-porch = <220>; |
||||
hfront-porch = <40>; |
||||
vback-porch = <21>; |
||||
vfront-porch = <7>; |
||||
hsync-len = <60>; |
||||
vsync-len = <10>; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pcie { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_pcie>; |
||||
reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&pwm2 { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
&pwm3 { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ |
||||
status = "disabled"; |
||||
}; |
||||
|
||||
&pwm4 { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_pwm4>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&uart1 { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_uart1>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&uart2 { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_uart2>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&uart3 { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_uart3>; |
||||
fsl,uart-has-rtscts; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&uart4 { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_uart4>; |
||||
fsl,uart-has-rtscts; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&uart5 { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_uart5>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&usbotg { |
||||
vbus-supply = <®_usb_otg_vbus>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_usbotg>; |
||||
disable-over-current; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&usbh1 { |
||||
vbus-supply = <®_usb_h1_vbus>; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&usdhc3 { |
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
||||
pinctrl-0 = <&pinctrl_usdhc3>; |
||||
pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
||||
pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
||||
non-removable; |
||||
vmmc-supply = <®_3p3v>; |
||||
keep-power-in-suspend; |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&wdog1 { |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&pinctrl_wdog>; |
||||
fsl,ext-reset-output; |
||||
}; |
||||
|
||||
&iomuxc { |
||||
imx6qdl-gw5904 { |
||||
pinctrl_enet: enetgrp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 |
||||
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 |
||||
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 |
||||
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 |
||||
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 |
||||
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 |
||||
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 |
||||
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 |
||||
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 |
||||
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 |
||||
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 |
||||
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 |
||||
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 |
||||
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 |
||||
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 |
||||
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 |
||||
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */ |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_gpio_leds: gpioledsgrp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 |
||||
MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 |
||||
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_i2c1: i2c1grp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 |
||||
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_i2c2: i2c2grp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 |
||||
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_i2c3: i2c3grp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 |
||||
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_imu_acc: gpioimxaccgrp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 /* INT1 */ |
||||
MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0 /* INT2 */ |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_imu_mag: gpioimxmaggrp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 /* IRQ */ |
||||
MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* data ready */ |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_pcie: pciegrp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_pmic: pmicgrp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 /* PMIC_IRQ# */ |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_pps: ppsgrp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_pwm2: pwm2grp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_pwm3: pwm3grp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_pwm4: pwm4grp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_uart1: uart1grp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 |
||||
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_uart2: uart2grp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 |
||||
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_uart3: uart3grp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 |
||||
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 |
||||
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 |
||||
MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_uart4: uart4grp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 |
||||
MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 |
||||
MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 |
||||
MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_uart5: uart5grp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 |
||||
MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_usbotg: usbotggrp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 |
||||
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ |
||||
MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_usdhc3: usdhc3grp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |
||||
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 |
||||
MX6QDL_PAD_SD3_RST__SD3_RESET 0x10059 |
||||
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
||||
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
||||
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
||||
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
||||
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 |
||||
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 |
||||
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 |
||||
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_usdhc3_100mhz: usdhc3grp100mhz { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 |
||||
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 |
||||
MX6QDL_PAD_SD3_RST__SD3_RESET 0x100b9 |
||||
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 |
||||
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 |
||||
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 |
||||
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 |
||||
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 |
||||
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 |
||||
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 |
||||
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_usdhc3_200mhz: usdhc3grp200mhz { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 |
||||
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 |
||||
MX6QDL_PAD_SD3_RST__SD3_RESET 0x100f9 |
||||
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 |
||||
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 |
||||
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 |
||||
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 |
||||
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 |
||||
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 |
||||
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 |
||||
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 |
||||
>; |
||||
}; |
||||
|
||||
pinctrl_wdog: wdoggrp { |
||||
fsl,pins = < |
||||
MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 |
||||
>; |
||||
}; |
||||
}; |
||||
}; |
@ -0,0 +1,18 @@ |
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -339,6 +339,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
|
||||
imx6dl-gw551x.dtb \
|
||||
imx6dl-gw552x.dtb \
|
||||
imx6dl-gw553x.dtb \
|
||||
+ imx6dl-gw5904.dtb \
|
||||
imx6dl-hummingboard.dtb \
|
||||
imx6dl-nit6xlite.dtb \
|
||||
imx6dl-nitrogen6x.dtb \
|
||||
@@ -379,6 +380,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
|
||||
imx6q-gw551x.dtb \
|
||||
imx6q-gw552x.dtb \
|
||||
imx6q-gw553x.dtb \
|
||||
+ imx6q-gw5904.dtb \
|
||||
imx6q-h100.dtb \
|
||||
imx6q-hummingboard.dtb \
|
||||
imx6q-icore-rqs.dtb \
|
Loading…
Reference in new issue