EnGenius ENS202EXT is an outdoor wireless access point with
2-port 10/100 switch, detachable antennas and proprietery PoE.
The device is based on Qualcomm/Atheros AR9341 v1.
Specifications:
- 535/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM
- 16 MB of FLASH
- UART (J1) header on PCB (unpopulated)
- 2x 10/100 Mbps Ethernet
- 2.4 GHz, up to 26dBm
- 2x external, detachable antennas
- 7x LED, 1x button
Flash instructions:
You have three options:
- Use the vendor firmware upgrade page on the web interface and give
it the factory.img. This is the easiest way to go about it.
- If you have serial access during u-boot, interrupt the normal boot
(any key before timeout) and run 'run failsafe_boot'; this will bring
you to a minimal openwrt luci image on ip 192.168.1.1 useful if you've
bricked the normal firmware.
- Use the vendor's management cli, which can be accessed via telnet
with the same credentials as the web login (default admin:admin), then
issue the following commands:
*** Hi admin, welcome to use cli(V-1.6.7) ***
---========= Commands Help =========---
stat -- Status
sys -- System
wless2 -- 2.4G-Wireless
mgmt -- Management
tree -- Tree
help -- Help
reboot -- Reboot
ens202ext>mgmt
Management
---========= Commands Help =========---
admin -- Administration
mvlan -- Management VLAN settings
snmp -- SNMP settings
backup -- Backup/Restore settings
autorb -- Auto reboot settings
fwgrade -- Firmware upgrade
time -- Time settings
wifisch -- Wifi schedule
log -- Log
diag -- Diagnostics
disc -- Device Discovery
logout -- Logout
help -- Help
exit -- Exit
ens202ext/mgmt>fwgrade
Management --> Firmware upgrade
---========= Commands Help =========---
fwup -- Firmware upgrade
help -- Help
exit -- Exit
ens202ext/mgmt/fwgrade>fwup http://web.server/lede-ar71xx-generic-ens202ext-squashfs-factory.bin
Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
master
Marty Plummer
8 years ago
committed by
Piotr Dymacz
parent
0f21873f7f
commit
558d86923e
@ -0,0 +1,124 @@ |
|||||||
|
/*
|
||||||
|
* EnGenius ENS202EXT board support |
||||||
|
* |
||||||
|
* Copyright (C) 2017 Marty Plummer <netz.kernel@gmail.com> |
||||||
|
* |
||||||
|
* This program is free software; you can redistribute it and/or modify it |
||||||
|
* under the terms of the GNU General Public License version 2 as published |
||||||
|
* by the Free Software Foundation. |
||||||
|
*/ |
||||||
|
|
||||||
|
#include <linux/gpio.h> |
||||||
|
#include <linux/mtd/mtd.h> |
||||||
|
#include <linux/mtd/partitions.h> |
||||||
|
#include <linux/platform_device.h> |
||||||
|
|
||||||
|
#include <asm/mach-ath79/ar71xx_regs.h> |
||||||
|
#include <asm/mach-ath79/ath79.h> |
||||||
|
|
||||||
|
#include "common.h" |
||||||
|
#include "dev-eth.h" |
||||||
|
#include "dev-gpio-buttons.h" |
||||||
|
#include "dev-leds-gpio.h" |
||||||
|
#include "dev-m25p80.h" |
||||||
|
#include "dev-wmac.h" |
||||||
|
#include "machtypes.h" |
||||||
|
#include "nvram.h" |
||||||
|
|
||||||
|
#define ENS202_GPIO_LED_WLAN4 0 |
||||||
|
#define ENS202_GPIO_LED_POWER 14 |
||||||
|
#define ENS202_GPIO_LED_WLAN2 16 |
||||||
|
#define ENS202_GPIO_LED_WLAN3 17 |
||||||
|
#define ENS202_GPIO_LED_WLAN1 18 |
||||||
|
|
||||||
|
#define ENS202_GPIO_BTN_RESET 1 |
||||||
|
|
||||||
|
#define ENS202_KEYS_POLL_INTERVAL 20 /* msecs */ |
||||||
|
#define ENS202_KEYS_DEBOUNCE_INTERVAL (3 * ENS202_KEYS_POLL_INTERVAL) |
||||||
|
|
||||||
|
static struct gpio_led ens202_leds_gpio[] __initdata = { |
||||||
|
{ |
||||||
|
.name = "engenius:amber:wlan1", |
||||||
|
.gpio = ENS202_GPIO_LED_WLAN1, |
||||||
|
.active_low = 1, |
||||||
|
}, { |
||||||
|
.name = "engenius:red:wlan2", |
||||||
|
.gpio = ENS202_GPIO_LED_WLAN2, |
||||||
|
.active_low = 1, |
||||||
|
}, { |
||||||
|
.name = "engenius:amber:wlan3", |
||||||
|
.gpio = ENS202_GPIO_LED_WLAN3, |
||||||
|
.active_low = 1, |
||||||
|
}, { |
||||||
|
.name = "engenius:green:wlan4", |
||||||
|
.gpio = ENS202_GPIO_LED_WLAN4, |
||||||
|
.active_low = 1, |
||||||
|
}, { |
||||||
|
.name = "engenius:amber:power", |
||||||
|
.gpio = ENS202_GPIO_LED_POWER, |
||||||
|
.active_low = 1, |
||||||
|
} |
||||||
|
}; |
||||||
|
|
||||||
|
static struct gpio_keys_button ens202_gpio_keys[] __initdata = { |
||||||
|
{ |
||||||
|
.desc = "reset", |
||||||
|
.type = EV_KEY, |
||||||
|
.code = KEY_RESTART, |
||||||
|
.debounce_interval = ENS202_KEYS_DEBOUNCE_INTERVAL, |
||||||
|
.gpio = ENS202_GPIO_BTN_RESET, |
||||||
|
.active_low = 1, |
||||||
|
} |
||||||
|
}; |
||||||
|
|
||||||
|
static void __init ens202_setup(void) |
||||||
|
{ |
||||||
|
const char *nvram = (char *) KSEG1ADDR(0x1f040000); |
||||||
|
u8 mac_buff[6]; |
||||||
|
u8 *mac = NULL; |
||||||
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); |
||||||
|
|
||||||
|
if (ath79_nvram_parse_mac_addr(nvram, 0x10000, |
||||||
|
"ethaddr=", mac_buff) == 0) { |
||||||
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0); |
||||||
|
ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1); |
||||||
|
mac = mac_buff; |
||||||
|
} |
||||||
|
|
||||||
|
ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); |
||||||
|
|
||||||
|
ath79_gpio_output_select(ENS202_GPIO_LED_POWER, AR934X_GPIO_OUT_GPIO); |
||||||
|
ath79_gpio_output_select(ENS202_GPIO_LED_WLAN1, AR934X_GPIO_OUT_GPIO); |
||||||
|
ath79_gpio_output_select(ENS202_GPIO_LED_WLAN2, AR934X_GPIO_OUT_GPIO); |
||||||
|
ath79_gpio_output_select(ENS202_GPIO_LED_WLAN3, AR934X_GPIO_OUT_GPIO); |
||||||
|
ath79_gpio_output_select(ENS202_GPIO_LED_WLAN4, AR934X_GPIO_OUT_GPIO); |
||||||
|
|
||||||
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(ens202_leds_gpio), |
||||||
|
ens202_leds_gpio); |
||||||
|
ath79_register_gpio_keys_polled(-1, ENS202_KEYS_POLL_INTERVAL, |
||||||
|
ARRAY_SIZE(ens202_gpio_keys), |
||||||
|
ens202_gpio_keys); |
||||||
|
|
||||||
|
ath79_register_m25p80(NULL); |
||||||
|
|
||||||
|
ath79_register_wmac(art + 0x1000, NULL); |
||||||
|
|
||||||
|
ath79_register_mdio(1, 0); |
||||||
|
|
||||||
|
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | |
||||||
|
AR934X_ETH_CFG_SW_ONLY_MODE); |
||||||
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; |
||||||
|
ath79_eth0_data.phy_mask = BIT(0); |
||||||
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; |
||||||
|
ath79_eth0_pll_data.pll_1000 = 0x06000000; |
||||||
|
|
||||||
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; |
||||||
|
ath79_eth1_data.speed = SPEED_1000; |
||||||
|
ath79_eth1_data.duplex = DUPLEX_FULL; |
||||||
|
|
||||||
|
ath79_register_eth(0); |
||||||
|
ath79_register_eth(1); |
||||||
|
} |
||||||
|
|
||||||
|
MIPS_MACHINE(ATH79_MACH_ENS202EXT, "ENS202EXT", "EnGenius ENS202EXT", |
||||||
|
ens202_setup); |
||||||
@ -0,0 +1,26 @@ |
|||||||
|
define Build/senao-factory-image |
||||||
|
$(eval board=$(word 1,$(1)))
|
||||||
|
$(eval rootfs=$(word 2,$(1)))
|
||||||
|
|
||||||
|
mkdir -p $@.senao
|
||||||
|
|
||||||
|
touch $@.senao/FWINFO-OpenWrt-$(REVISION)-$(board)
|
||||||
|
$(CP) $(IMAGE_KERNEL) $@.senao/openwrt-senao-$(board)-uImage-lzma.bin
|
||||||
|
$(CP) $(rootfs) $@.senao/openwrt-senao-$(board)-root.squashfs
|
||||||
|
|
||||||
|
$(TAR) -czf $@ -C $@.senao .
|
||||||
|
rm -rf $@.senao
|
||||||
|
endef |
||||||
|
|
||||||
|
define Device/ens202ext |
||||||
|
DEVICE_TITLE := EnGenius ENS202EXT
|
||||||
|
BOARDNAME := ENS202EXT
|
||||||
|
DEVICE_PACKAGES += rssileds
|
||||||
|
KERNEL_SIZE := 1536k
|
||||||
|
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | check-size $$(KERNEL_SIZE)
|
||||||
|
IMAGE_SIZE := 12096k
|
||||||
|
IMAGES += factory.bin
|
||||||
|
IMAGE/factory.bin/squashfs := append-rootfs | pad-rootfs | senao-factory-image ens202ext $$$$@
|
||||||
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom)ro,13632k(firmware),2048k(failsafe)ro,64k(art)ro
|
||||||
|
endef |
||||||
|
TARGET_DEVICES += ens202ext
|
||||||
Loading…
Reference in new issue