mac80211: Fix loading of rsi_sdio module

When CONFIG_PM was not set rsi_sdio_reinit_device() was not compiled
into the driver but referenced.
This is a backport form the mainline Linux kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
master
Hauke Mehrtens 7 years ago
parent 36314c12c0
commit 51e4868fc9
  1. 96
      package/kernel/mac80211/patches/971-rsi-move-rsi_sdio_reinit_device-out-of-CONFIG_PM.patch

@ -0,0 +1,96 @@
From 39f1332c526cd9d6de59a72520e8334e54b62cda Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Date: Wed, 1 Nov 2017 17:42:44 +0530
Subject: rsi: move rsi_sdio_reinit_device() out of CONFIG_PM
This function is generic. It doesn't contain wowlan specific code.
It should not be under CONFIG_PM. This patch resolves compilation
errors observed when CONFIG_PM flag is disabled.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: ef71ed0608c ("rsi: sdio: Add WOWLAN support for S5 shutdown state")
Fixes: a24e35fcee0 ("rsi: sdio: Add WOWLAN support for S4 hibernate state")
Fixes: e1ced6422a3 ("rsi: sdio: add WOWLAN support for S3 suspend state")
Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
drivers/net/wireless/rsi/rsi_91x_sdio.c | 52 ++++++++++++++++-----------------
drivers/net/wireless/rsi/rsi_sdio.h | 1 -
2 files changed, 26 insertions(+), 27 deletions(-)
--- a/drivers/net/wireless/rsi/rsi_91x_sdio.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c
@@ -871,6 +871,32 @@ fail:
return status;
}
+static int rsi_sdio_reinit_device(struct rsi_hw *adapter)
+{
+ struct rsi_91x_sdiodev *sdev = adapter->rsi_dev;
+ struct sdio_func *pfunction = sdev->pfunction;
+ int ii;
+
+ for (ii = 0; ii < NUM_SOFT_QUEUES; ii++)
+ skb_queue_purge(&adapter->priv->tx_queue[ii]);
+
+ /* Initialize device again */
+ sdio_claim_host(pfunction);
+
+ sdio_release_irq(pfunction);
+ rsi_reset_card(pfunction);
+
+ sdio_enable_func(pfunction);
+ rsi_setupcard(adapter);
+ rsi_init_sdio_slave_regs(adapter);
+ sdio_claim_irq(pfunction, rsi_handle_interrupt);
+ rsi_hal_device_init(adapter);
+
+ sdio_release_host(pfunction);
+
+ return 0;
+}
+
static struct rsi_host_intf_ops sdio_host_intf_ops = {
.write_pkt = rsi_sdio_host_intf_write_pkt,
.read_pkt = rsi_sdio_host_intf_read_pkt,
@@ -1281,32 +1307,6 @@ static void rsi_shutdown(struct device *
rsi_dbg(INFO_ZONE, "***** RSI module shut down *****\n");
}
-int rsi_sdio_reinit_device(struct rsi_hw *adapter)
-{
- struct rsi_91x_sdiodev *sdev = adapter->rsi_dev;
- struct sdio_func *pfunction = sdev->pfunction;
- int ii;
-
- for (ii = 0; ii < NUM_SOFT_QUEUES; ii++)
- skb_queue_purge(&adapter->priv->tx_queue[ii]);
-
- /* Initialize device again */
- sdio_claim_host(pfunction);
-
- sdio_release_irq(pfunction);
- rsi_reset_card(pfunction);
-
- sdio_enable_func(pfunction);
- rsi_setupcard(adapter);
- rsi_init_sdio_slave_regs(adapter);
- sdio_claim_irq(pfunction, rsi_handle_interrupt);
- rsi_hal_device_init(adapter);
-
- sdio_release_host(pfunction);
-
- return 0;
-}
-
static int rsi_restore(struct device *dev)
{
struct sdio_func *pfunction = dev_to_sdio_func(dev);
--- a/drivers/net/wireless/rsi/rsi_sdio.h
+++ b/drivers/net/wireless/rsi/rsi_sdio.h
@@ -131,5 +131,4 @@ int rsi_sdio_master_access_msword(struct
void rsi_sdio_ack_intr(struct rsi_hw *adapter, u8 int_bit);
int rsi_sdio_determine_event_timeout(struct rsi_hw *adapter);
int rsi_sdio_check_buffer_status(struct rsi_hw *adapter, u8 q_num);
-int rsi_sdio_reinit_device(struct rsi_hw *adapter);
#endif
Loading…
Cancel
Save