ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4

This patch ports the TP-Link TL-WR741ND v4 and TL-WR740ND v4 to the
ath79 target.

Because the two devices share the same hw layout, this patch adds a common
.dtsi which is included by the two .dts.

Signed-off-by: Rocco Folino <rocco@folino.io>
master
Rocco Folino 6 years ago committed by John Crispin
parent 9b575288eb
commit 4ff019722c
  1. 8
      target/linux/ath79/base-files/etc/board.d/01_leds
  2. 7
      target/linux/ath79/base-files/etc/board.d/02_network
  3. 9
      target/linux/ath79/dts/ar9331_tl-wr740nd-v4.dts
  4. 9
      target/linux/ath79/dts/ar9331_tl-wr741nd-v4.dts
  5. 173
      target/linux/ath79/dts/ar9331_tl-wr741nd-v4.dtsi
  6. 18
      target/linux/ath79/image/tiny-tp-link.mk

@ -45,6 +45,14 @@ case "$board" in
ucidef_set_led_switch "lan3" "LAN3" "$boardname:green:lan3" "switch0" "0x08" ucidef_set_led_switch "lan3" "LAN3" "$boardname:green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "$boardname:green:lan4" "switch0" "0x10" ucidef_set_led_switch "lan4" "LAN4" "$boardname:green:lan4" "switch0" "0x10"
;; ;;
"tplink,tl-wr741nd-v4"|\
"tplink,tl-wr740nd-v4")
ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
;;
esac esac
board_config_flush board_config_flush

@ -70,6 +70,13 @@ ath79_setup_interfaces()
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
;; ;;
"tplink,tl-wr741nd-v4"|\
"tplink,tl-wr740nd-v4")
ucidef_set_interfaces_wan "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
"tplink,tl-wr1043nd-v1") "tplink,tl-wr1043nd-v1")
ucidef_add_switch "switch0" \ ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9331_tl-wr741nd-v4.dtsi"
/ {
model = "TP-Link TL-WR740N/ND v4";
compatible = "tplink,tl-wr740n-v4";
};

@ -0,0 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ar9331_tl-wr741nd-v4.dtsi"
/ {
model = "TP-Link TL-WR741N/ND v4";
compatible = "tplink,tl-wr741n-v4";
};

@ -0,0 +1,173 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9331.dtsi"
/ {
compatible = "tplink,tl-wr741n-v4", "qca,ar9331";
model = "TP-Link TL-WR741N/ND v4";
aliases {
serial0 = &uart;
led-status = &led_system;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&switch_led_pins>;
lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
};
lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
led_system: system {
label = "tp-link:green:system";
gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
};
wan {
label = "tp-link:green:wan";
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
reg = <0x0 0x20000>;
label = "u-boot";
read-only;
};
firmware: partition@20000 {
reg = <0x20000 0x3d0000>;
label = "firmware";
};
art: partition@3f0000 {
reg = <0x3f0000 0x10000>;
label = "art";
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "mii";
};
};
&eth0 {
status = "okay";
phy-handle = <&phy4>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
gmac-config {
device = <&gmac>;
switch-phy-addr-swap = <1>;
switch-phy-swap = <1>;
};
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
&gpio {
status = "okay";
};
&uart {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

@ -60,6 +60,24 @@ define Device/tl-wr740n-v2
endef endef
TARGET_DEVICES += tl-wr740n-v2 TARGET_DEVICES += tl-wr740n-v2
define Device/tl-wr740nd-v4
$(Device/tplink-4mlzma)
ATH_SOC := ar9331
DEVICE_TITLE := TP-LINK TL-WR740N/ND v4
TPLINK_HWID := 0x07400004
SUPPORTED_DEVICES := tplink,tl-wr740n-v4 tl-wr740n-v4
endef
TARGET_DEVICES += tl-wr740nd-v4
define Device/tl-wr741nd-v4
$(Device/tplink-4mlzma)
ATH_SOC := ar9331
DEVICE_TITLE := TP-LINK TL-WR741N/ND v4
TPLINK_HWID := 0x07410004
SUPPORTED_DEVICES := tplink,tl-wr741n-v4 tl-wr741n-v4
endef
TARGET_DEVICES += tl-wr741nd-v4
define Device/tl-wr841-v7 define Device/tl-wr841-v7
$(Device/tplink-4m) $(Device/tplink-4m)
ATH_SOC := ar7241 ATH_SOC := ar7241

Loading…
Cancel
Save