remove support for kernel 2.6.21

SVN-Revision: 19452

target/linux/amazon/config-2.6.21

@@ -1,146 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_ADM6996_SUPPORT=y
-CONFIG_AMAZON_ASC_UART=y
-CONFIG_AMAZON_MTD=y
-CONFIG_AMAZON_NET_SW=y
-CONFIG_AMAZON_PCI=y
-CONFIG_AMAZON_WDT=y
-CONFIG_AMAZON=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_BITREVERSE=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/bin/sh"
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-# CONFIG_GEN_RTC is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_STD_PC_SERIAL_PORT=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-# CONFIG_IDE is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_KALLSYMS=y
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_EV64120 is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_MIRAGE is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_MIPS_XXS1500 is not set
-CONFIG_MIPS=y
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT is not set
-CONFIG_MTD_AMAZON_BUS_WIDTH_16=y
-# CONFIG_MTD_AMAZON_BUS_WIDTH_32 is not set
-# CONFIG_MTD_AMAZON_BUS_WIDTH_8 is not set
-# CONFIG_MTD_AMAZON_FLASH_SIZE_16 is not set
-# CONFIG_MTD_AMAZON_FLASH_SIZE_2 is not set
-CONFIG_MTD_AMAZON_FLASH_SIZE_4=y
-# CONFIG_MTD_AMAZON_FLASH_SIZE_8 is not set
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-CONFIG_MTD_REDBOOT_PARTS=y
-# CONFIG_NET_PCI is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNPACPI is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_RTC is not set
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_SERIAL_8250 is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_UNUSED_SYMBOLS is not set

target/linux/amazon/patches/017-wdt-driver.patch

@@ -1,10 +0,0 @@
---- a/drivers/char/watchdog/Makefile
-+++ b/drivers/char/watchdog/Makefile
-@@ -74,6 +74,7 @@ obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
- # MIPS Architecture
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
-+obj-$(CONFIG_AMAZON_WDT) += amazon_wdt.o
- 
- # S390 Architecture
- 

target/linux/amazon/patches/100-board.patch

@@ -1,59 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -159,6 +159,17 @@ config BASLER_EXCITE_PROTOTYPE
- 	  note that a kernel built with this option selected will not be
- 	  able to run on normal units.
- 
-+config AMAZON
-+	bool "Amazon support (EXPERIMENTAL)"
-+	depends on EXPERIMENTAL
-+	select DMA_NONCOHERENT
-+	select IRQ_CPU
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select HAVE_STD_PC_SERIAL_PORT
-+	select SYS_SUPPORTS_BIG_ENDIAN
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select SYS_HAS_EARLY_PRINTK
-+
- config MIPS_COBALT
- 	bool "Cobalt Server"
- 	select DMA_NONCOHERENT
-@@ -823,6 +834,7 @@ config TOSHIBA_RBTX4938
- 
- endchoice
- 
-+source "arch/mips/amazon/Kconfig"
- source "arch/mips/ddb5xxx/Kconfig"
- source "arch/mips/gt64120/ev64120/Kconfig"
- source "arch/mips/jazz/Kconfig"
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -267,6 +267,13 @@ libs-$(CONFIG_MIPS_XXS1500)	+= arch/mips
- load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
- 
- #
-+# Infineon AMAZON
-+#
-+core-$(CONFIG_AMAZON)		+= arch/mips/amazon/
-+cflags-$(CONFIG_AMAZON)	+= -Iinclude/asm-mips/mach-amazon
-+load-$(CONFIG_AMAZON)		+= 0xffffffff80002000
-+
-+#
- # Cobalt Server
- #
- core-$(CONFIG_MIPS_COBALT)	+= arch/mips/cobalt/
---- a/include/asm-mips/bootinfo.h
-+++ b/include/asm-mips/bootinfo.h
-@@ -213,6 +213,12 @@
- #define MACH_GROUP_NEC_EMMA2RH 25	/* NEC EMMA2RH (was 23)		*/
- #define  MACH_NEC_MARKEINS	0	/* NEC EMMA2RH Mark-eins	*/
- 
-+/*
-+ * Valid machtype for group Infineon
-+ */
-+#define MACH_GROUP_INFINEON	27
-+#define MACH_INFINEON_AMAZON	0
-+
- #define CL_SIZE			COMMAND_LINE_SIZE
- 
- const char *get_system_type(void);

target/linux/amazon/patches/130-mtd_drivers.patch

@@ -1,7 +0,0 @@
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -72,3 +72,4 @@ obj-$(CONFIG_MTD_PLATRAM)	+= plat-ram.o
- obj-$(CONFIG_MTD_OMAP_NOR)	+= omap_nor.o
- obj-$(CONFIG_MTD_MTX1)		+= mtx-1_flash.o
- obj-$(CONFIG_MTD_TQM834x)	+= tqm834x.o
-+obj-$(CONFIG_AMAZON_MTD)	+= amazon.o

target/linux/amazon/patches/140-net_drivers.patch

@@ -1,9 +0,0 @@
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -219,3 +219,6 @@ obj-$(CONFIG_NETCONSOLE) += netconsole.o
- obj-$(CONFIG_FS_ENET) += fs_enet/
- 
- obj-$(CONFIG_NETXEN_NIC) += netxen/
-+
-+obj-$(CONFIG_AMAZON_NET_SW) += amazon_sw.o
-+obj-$(CONFIG_ADM6996_SUPPORT) += admmod.o

target/linux/amazon/patches/150-serial_driver.patch

@@ -1,10 +0,0 @@
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -5,6 +5,7 @@
- #
- 
- obj-$(CONFIG_SERIAL_CORE) += serial_core.o
-+obj-$(CONFIG_AMAZON_ASC_UART) += amazon_asc.o
- obj-$(CONFIG_SERIAL_21285) += 21285.o
- obj-$(CONFIG_SERIAL_8250) += 8250.o
- obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o

target/linux/amazon/patches/160-cfi-swap.patch

@@ -1,25 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1007,7 +1007,9 @@ static int __xipram do_write_oneword(str
- 	int ret = 0;
- 	map_word oldd;
- 	int retry_cnt = 0;
--
-+#ifdef CONFIG_AMAZON
-+	adr ^= 2;
-+#endif
- 	adr += chip->start;
- 
- 	spin_lock(chip->mutex);
-@@ -1291,7 +1293,11 @@ static int __xipram do_write_buffer(stru
- 	z = 0;
- 	while(z < words * map_bankwidth(map)) {
- 		datum = map_word_load(map, buf);
-+#ifdef CONFIG_AMAZON
-+		map_write(map, datum, (adr + z) ^ 0x2);
-+#else
- 		map_write(map, datum, adr + z);
-+#endif
- 
- 		z += map_bankwidth(map);
- 		buf += map_bankwidth(map);