ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router

[juhosg:
- don't switch back to 2.6.39
- update config-3.2
- change machine id to SL-R7205
- reorder case entries in platform scripts
- remove button hotplug script]

Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com>

SVN-Revision: 30645
master
Gabor Juhos 13 years ago
parent 413caddc34
commit 3489515a7e
  1. 3
      target/linux/ramips/base-files/etc/diag.sh
  2. 1
      target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
  3. 3
      target/linux/ramips/base-files/etc/uci-defaults/leds
  4. 2
      target/linux/ramips/base-files/etc/uci-defaults/network
  5. 3
      target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
  6. 3
      target/linux/ramips/base-files/lib/ramips.sh
  7. 1
      target/linux/ramips/base-files/lib/upgrade/platform.sh
  8. 1
      target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
  9. 5
      target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
  10. 1
      target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
  11. 112
      target/linux/ramips/files/arch/mips/ralink/rt305x/mach-sl-r7205.c
  12. 5
      target/linux/ramips/image/Makefile
  13. 1
      target/linux/ramips/rt305x/config-2.6.39
  14. 1
      target/linux/ramips/rt305x/config-3.2

@ -69,6 +69,9 @@ get_status_led() {
rt-n56u)
status_led="asus:blue:power"
;;
sl-r7205)
status_led="sl-r7205:green:status"
;;
v11st-fe)
status_led="v11st-fe:green:status"
;;

@ -60,6 +60,7 @@ case "$FIRMWARE" in
omni-emb | \
rt-n15 | \
rt-n56u | \
sl-r7205 | \
v11st-fe | \
v22rw-2x2 | \
w502u | \

@ -60,6 +60,9 @@ case $board in
nw718)
set_usb_led "nw718:amber:usb"
;;
sl-r7205)
set_wifi_led "rt2800pci-phy0::radio"
;;
v11st-fe)
set_wifi_led "rt2800pci-phy0::radio"
;;

@ -23,6 +23,7 @@ ramips_setup_interfaces()
argus-atp52b | \
b2c | \
nw718 | \
sl-r7205 | \
w502u | \
wr6202)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
@ -99,6 +100,7 @@ ramips_setup_macs()
f5d8235-v1 | \
nw718 | \
rt-n15 | \
sl-r7205 | \
wl-351)
lan_mac=$(ramips_get_mac_binary factory 4)
wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)

@ -9,9 +9,10 @@ preinit_set_mac_address() {
case $(ramips_board_name) in
bc2 |\
esr-9753 |\
nw718 |\
rt-n56u |\
esr-9753)
sl-r7205)
mac=$(ramips_get_mac_binary factory 4)
mac=$(maccalc or "$mac" "02:00:00:00:00:00")
ifconfig eth0 hw ether $mac 2>/dev/null

@ -104,6 +104,9 @@ ramips_board_name() {
*"RT-N56U")
name="rt-n56u"
;;
*"Skyline SL-R7205"*)
name="sl-r7205"
;;
*"Sparklan WCR-150GN")
name="wcr-150gn"
;;

@ -29,6 +29,7 @@ platform_check_image() {
rt-g32-b1 | \
rt-n15 | \
rt-n56u | \
sl-r7205 | \
w502u |\
wr6202 |\
v22rw-2x2 | \

@ -39,6 +39,7 @@ enum ramips_mach_type {
RAMIPS_MACH_NBG_419N, /* ZyXEL NBG-419N */
RAMIPS_MACH_OMNI_EMB, /* Omnima MiniEMBWiFi */
RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */
RAMIPS_MACH_SL_R7205, /* Skylink SL-R7205 Wireless 3G Router*/
RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */
RAMIPS_MACH_W502U, /* ALFA Networks W502U */
RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */

@ -101,6 +101,11 @@ config RT305X_MACH_WL351
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_SL_R7205
bool "Skyline SL-R7205 Wireless 3G Router support"
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_WCR150GN
bool "Sparklan WCR-150GN support"
select RALINK_DEV_GPIO_BUTTONS

@ -25,6 +25,7 @@ obj-$(CONFIG_RT305X_MACH_NW718) += mach-nw718.o
obj-$(CONFIG_RT305X_MACH_OMNI_EMB) += mach-omni-emb.o
obj-$(CONFIG_RT305X_MACH_PWH2004) += mach-pwh2004.o
obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o
obj-$(CONFIG_RT305X_MACH_SL_R7205) += mach-sl-r7205.o
obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o
obj-$(CONFIG_RT305X_MACH_W502U) += mach-w502u.o
obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o

@ -0,0 +1,112 @@
/*
* Skyline SL-R7205 Wireless 3G Router support
*
* Copyright (C) 2012 Haipoh Teoh <hpteoh@ceedtec.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#include <asm/mach-ralink/dev-gpio-leds.h>
#include <asm/mach-ralink/rt305x.h>
#include <asm/mach-ralink/rt305x_regs.h>
#include "devices.h"
#define SL_R7205_GPIO_BUTTON_WPS 0
#define SL_R7205_GPIO_BUTTON_RESET 10 /* active low */
#define SL_R7205_GPIO_LED_WIFI 7
#define SL_R7205_KEYS_POLL_INTERVAL 20
#define SL_R7205_KEYS_DEBOUNCE_INTERVAL (3 * SL_R7205_KEYS_POLL_INTERVAL)
static struct mtd_partition sl_r7205_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x030000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "u-boot-env",
.offset = 0x030000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "factory",
.offset = 0x040000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "kernel",
.offset = 0x050000,
.size = 0x0a0000,
}, {
.name = "rootfs",
.offset = 0x150000,
.size = 0x2b0000,
}, {
.name = "firmware",
.offset = 0x050000,
.size = 0x3b0000,
}
};
static struct gpio_led sl_r7205_leds_gpio[] __initdata = {
{
.name = "sl-r7205:green:wifi",
.gpio = SL_R7205_GPIO_LED_WIFI,
.active_low = 1,
}
};
static struct gpio_keys_button sl_r7205_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = SL_R7205_KEYS_DEBOUNCE_INTERVAL,
.gpio = SL_R7205_GPIO_BUTTON_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = SL_R7205_KEYS_DEBOUNCE_INTERVAL,
.gpio = SL_R7205_GPIO_BUTTON_WPS,
.active_low = 1,
}
};
static void __init sl_r7205_init(void)
{
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_flash0_data.nr_parts = ARRAY_SIZE(sl_r7205_partitions);
rt305x_flash0_data.parts = sl_r7205_partitions;
rt305x_register_flash(0);
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
rt305x_register_ethernet();
ramips_register_gpio_leds(-1, ARRAY_SIZE(sl_r7205_leds_gpio),
sl_r7205_leds_gpio);
ramips_register_gpio_buttons(-1, SL_R7205_KEYS_POLL_INTERVAL,
ARRAY_SIZE(sl_r7205_gpio_buttons),
sl_r7205_gpio_buttons);
rt305x_register_wifi();
rt305x_register_wdt();
rt305x_register_usb();
}
MIPS_MACHINE(RAMIPS_MACH_SL_R7205, "SL-R7205",
"Skyline SL-R7205 Wireless 3G Router",
sl_r7205_init);

@ -313,6 +313,10 @@ define Image/Build/Profile/WR5123GN
$(call Image/Build/Template/GENERIC_8M,$(1),wr512-3gn-8M,WR512-3GN)
endef
define Image/Build/Profile/SLR7205
$(call Image/Build/Template/GENERIC_4M,$(1),sl-r7205,SL-R7205)
endef
ifeq ($(CONFIG_RALINK_RT305X),y)
define Image/Build/Profile/Default
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
@ -327,6 +331,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/NW718,$(1))
$(call Image/Build/Profile/OMNIEMB,$(1))
$(call Image/Build/Profile/PWH2004,$(1))
$(call Image/Build/Profile/SLR7205,$(1))
$(call Image/Build/Profile/WHRG300N,$(1))
$(call Image/Build/Profile/WCR150GN,$(1))
$(call Image/Build/Profile/F5D8235V2,$(1))

@ -107,6 +107,7 @@ CONFIG_RT305X_MACH_NW718=y
CONFIG_RT305X_MACH_OMNI_EMB=y
CONFIG_RT305X_MACH_PWH2004=y
CONFIG_RT305X_MACH_RT_G32_REVB=y
CONFIG_RT305X_MACH_SL_R7205=y
CONFIG_RT305X_MACH_V22RW_2X2=y
CONFIG_RT305X_MACH_W502U=y
CONFIG_RT305X_MACH_WCR150GN=y

@ -106,6 +106,7 @@ CONFIG_RT305X_MACH_NW718=y
CONFIG_RT305X_MACH_OMNI_EMB=y
CONFIG_RT305X_MACH_PWH2004=y
CONFIG_RT305X_MACH_RT_G32_REVB=y
CONFIG_RT305X_MACH_SL_R7205=y
CONFIG_RT305X_MACH_V22RW_2X2=y
CONFIG_RT305X_MACH_W502U=y
CONFIG_RT305X_MACH_WCR150GN=y

Loading…
Cancel
Save