I-O DATA WN-AG300DGR is a 2T2R 2.4/5 GHz 11n router, based on Atheros AR1022. WN-AG300DGR does not have an LED to indicates power or system status, I set "router" LED as OpenWrt status LED. There is no eeprom data for 5 GHz wlan in "art" partition. Specification: - Atheros AR1022 - 64 MB of RAM (DDR2) - 8 MB of Flash (SPI-NOR) - 2T2R 2.4/5GHz wifi - 2.4 GHz: SoC internal - 5 GHz: Atheros AR93x2 - 5x 10/100/1000 Mbps Ethernet - 6x LEDs, 6x keys (4x buttons, 1x slide switch) - 1x USB 2.0 Type-A - UART through-hole on PCB - Vcc, GND, TX, RX from ethernet port side - 115200n8 Flash instruction using factory image: 1. Connect the computer to the LAN port on WN-AG300DGR 2. Connect power cable to WN-AG300DGR and turn it 3. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 4. Select the OpenWrt factory image and click update ("更新") button 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>master
INAGAKI Hiroshi
6 years ago
committed by
Mathias Kresin
parent
9dd7147f6b
commit
3358cae523
@ -0,0 +1,222 @@ |
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
||||
/dts-v1/; |
||||
|
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/input/input.h> |
||||
|
||||
#include "ar9344.dtsi" |
||||
|
||||
/ { |
||||
compatible = "iodata,wn-ag300dgr", "qca,ar9344"; |
||||
model = "I-O DATA WN-AG300DGR"; |
||||
|
||||
aliases { |
||||
led-boot = &router; |
||||
led-failsafe = &router; |
||||
led-running = &router; |
||||
led-upgrade = &router; |
||||
}; |
||||
|
||||
leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
router: router { |
||||
label = "wn-ag300dgr:green:router"; |
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>; |
||||
default-state = "on"; |
||||
}; |
||||
|
||||
children { |
||||
label = "wn-ag300dgr:green:children"; |
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
eco { |
||||
label = "wn-ag300dgr:green:eco"; |
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
notification { |
||||
label = "wn-ag300dgr:amber:notification"; |
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
wlan2g { |
||||
label = "wn-ag300dgr:green:wlan2g"; |
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>; |
||||
default-state = "off"; |
||||
linux,default-trigger = "phy0tpt"; |
||||
}; |
||||
|
||||
wlan5g { |
||||
label = "wn-ag300dgr:green:wlan5g"; |
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>; |
||||
default-state = "off"; |
||||
linux,default-trigger = "phy1tpt"; |
||||
}; |
||||
}; |
||||
|
||||
keys { |
||||
compatible = "gpio-keys-polled"; |
||||
poll-interval = <20>; |
||||
|
||||
eco { |
||||
label = "eco"; |
||||
gpios = <&gpio 0 GPIO_ACTIVE_LOW>; |
||||
linux,code = <BTN_1>; |
||||
debounce-interval = <60>; |
||||
}; |
||||
|
||||
router { |
||||
label = "router"; |
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>; |
||||
linux,code = <BTN_0>; |
||||
linux,input-type = <EV_SW>; |
||||
debounce-interval = <60>; |
||||
}; |
||||
|
||||
auto { |
||||
label = "auto"; |
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>; |
||||
linux,code = <BTN_0>; |
||||
linux,input-type = <EV_SW>; |
||||
debounce-interval = <60>; |
||||
}; |
||||
|
||||
wps { |
||||
label = "wps"; |
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>; |
||||
linux,code = <KEY_WPS_BUTTON>; |
||||
debounce-interval = <60>; |
||||
}; |
||||
|
||||
reset { |
||||
label = "reset"; |
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>; |
||||
linux,code = <KEY_RESTART>; |
||||
debounce-interval = <60>; |
||||
}; |
||||
|
||||
children { |
||||
label = "children"; |
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>; |
||||
linux,code = <BTN_1>; |
||||
debounce-interval = <60>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&ref { |
||||
clock-frequency = <25000000>; |
||||
}; |
||||
|
||||
&spi { |
||||
num-cs = <1>; |
||||
status = "okay"; |
||||
|
||||
flash@0 { |
||||
compatible = "jedec,spi-nor"; |
||||
reg = <0>; |
||||
spi-max-frequency = <25000000>; |
||||
|
||||
partitions { |
||||
compatible = "fixed-partitions"; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
|
||||
partition@0 { |
||||
label = "u-boot"; |
||||
reg = <0x000000 0x030000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@30000 { |
||||
label = "u-boot-env"; |
||||
reg = <0x030000 0x010000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@40000 { |
||||
compatible = "denx,uimage"; |
||||
label = "firmware"; |
||||
reg = <0x040000 0xf10000>; |
||||
}; |
||||
|
||||
partition@f50000 { |
||||
label = "manufacture"; |
||||
reg = <0xf50000 0x40000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@f90000 { |
||||
label = "backup"; |
||||
reg = <0xf90000 0x10000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@fa0000 { |
||||
label = "storage"; |
||||
reg = <0xfa0000 0x50000>; |
||||
read-only; |
||||
}; |
||||
|
||||
partition@ff0000 { |
||||
label = "art"; |
||||
reg = <0xff0000 0x010000>; |
||||
read-only; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&mdio0 { |
||||
status = "okay"; |
||||
|
||||
phy0: ethernet-phy@0 { |
||||
reg = <0>; |
||||
phy-mode = "rgmii"; |
||||
|
||||
qca,ar8327-initvals = < |
||||
0x04 0x07a00000 /* PORT0 PAD MODE CTRL */ |
||||
0x7c 0x000000fe /* PORT0_STATUS */ |
||||
>; |
||||
}; |
||||
}; |
||||
|
||||
ð0 { |
||||
status = "okay"; |
||||
|
||||
pll-data = <0x06000000 0x00000101 0x00001616>; |
||||
|
||||
phy-mode = "rgmii"; |
||||
phy-handle = <&phy0>; |
||||
|
||||
gmac-config { |
||||
device = <&gmac>; |
||||
rgmii-gmac0 = <1>; |
||||
}; |
||||
}; |
||||
|
||||
&pcie { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&uart { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&usb { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&usb_phy { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&wmac { |
||||
status = "okay"; |
||||
qca,no-eeprom; |
||||
}; |
||||
Loading…
Reference in new issue