GL.iNet GL-AR750 is a small size, dual-band (AC750) router, based on Qualcomm/Atheros QCA9531 v2 + QCA9887. FCC ID: 2AFIW-AR750. Specification: - 650/597/216 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3x 10/100 Mbps Ethernet - 2T2R 2.4 GHz (QCA9531) - 1T1R 5 GHz (QCA9887) - 1x USB 2.0 (power controlled by GPIO) - 1x microSD (GL857L) - 3x LED (all driven by GPIO) - 1x button (reset) - 1x 2-pos switch - header for optional PoE module - 1x micro USB for main power input - UART + I2C header on PCB Flash instruction: Vendor firmware is based on OpenWrt/LEDE. GUI or sysupgrade can be used to flash OpenWrt/LEDE firmware. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>master
parent
6cf682e214
commit
2e5252d346
@ -0,0 +1,146 @@ |
||||
/*
|
||||
* GL.iNet GL-AR750 board support |
||||
* |
||||
* Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com> |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify it |
||||
* under the terms of the GNU General Public License version 2 as published |
||||
* by the Free Software Foundation. |
||||
*/ |
||||
|
||||
#include <linux/gpio.h> |
||||
#include <linux/i2c.h> |
||||
#include <linux/i2c-gpio.h> |
||||
#include <linux/platform_device.h> |
||||
|
||||
#include <asm/mach-ath79/ath79.h> |
||||
#include <asm/mach-ath79/ar71xx_regs.h> |
||||
|
||||
#include "common.h" |
||||
#include "dev-ap9x-pci.h" |
||||
#include "dev-eth.h" |
||||
#include "dev-gpio-buttons.h" |
||||
#include "dev-leds-gpio.h" |
||||
#include "dev-m25p80.h" |
||||
#include "dev-usb.h" |
||||
#include "dev-wmac.h" |
||||
#include "machtypes.h" |
||||
|
||||
#define GL_AR750_GPIO_LED_POWER 12 |
||||
#define GL_AR750_GPIO_LED_WLAN2G 14 |
||||
#define GL_AR750_GPIO_LED_WLAN5G 13 |
||||
|
||||
#define GL_AR750_GPIO_BTN_RESET 3 |
||||
#define GL_AR750_GPIO_BTN_SW1 0 |
||||
|
||||
#define GL_AR750_GPIO_I2C_SCL 16 |
||||
#define GL_AR750_GPIO_I2C_SDA 17 |
||||
|
||||
#define GL_AR750_GPIO_USB_POWER 2 |
||||
|
||||
#define GL_AR750_KEYS_POLL_INTERVAL 20 |
||||
#define GL_AR750_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR750_KEYS_POLL_INTERVAL) |
||||
|
||||
#define GL_AR750_MAC0_OFFSET 0 |
||||
#define GL_AR750_WMAC2G_CALDATA_OFFSET 0x1000 |
||||
#define GL_AR750_WMAC5G_CALDATA_OFFSET 0x5000 |
||||
|
||||
static struct gpio_led gl_ar750_leds_gpio[] __initdata = { |
||||
{ |
||||
.name = "gl-ar750:white:power", |
||||
.gpio = GL_AR750_GPIO_LED_POWER, |
||||
.default_state = LEDS_GPIO_DEFSTATE_KEEP, |
||||
.active_low = 1, |
||||
}, { |
||||
.name = "gl-ar750:white:wlan2g", |
||||
.gpio = GL_AR750_GPIO_LED_WLAN2G, |
||||
.active_low = 1, |
||||
}, { |
||||
.name = "gl-ar750:white:wlan5g", |
||||
.gpio = GL_AR750_GPIO_LED_WLAN5G, |
||||
.active_low = 1, |
||||
}, |
||||
}; |
||||
|
||||
static struct gpio_keys_button gl_ar750_gpio_keys[] __initdata = { |
||||
{ |
||||
.desc = "reset", |
||||
.type = EV_KEY, |
||||
.code = KEY_RESTART, |
||||
.debounce_interval = GL_AR750_KEYS_DEBOUNCE_INTERVAL, |
||||
.gpio = GL_AR750_GPIO_BTN_RESET, |
||||
.active_low = 1, |
||||
}, { |
||||
.desc = "sw1", |
||||
.type = EV_KEY, |
||||
.code = BTN_0, |
||||
.debounce_interval = GL_AR750_KEYS_DEBOUNCE_INTERVAL, |
||||
.gpio = GL_AR750_GPIO_BTN_SW1, |
||||
.active_low = 1, |
||||
}, |
||||
}; |
||||
|
||||
static struct i2c_gpio_platform_data gl_ar750_i2c_gpio_data = { |
||||
.sda_pin = GL_AR750_GPIO_I2C_SDA, |
||||
.scl_pin = GL_AR750_GPIO_I2C_SCL, |
||||
}; |
||||
|
||||
static struct platform_device gl_ar750_i2c_gpio = { |
||||
.name = "i2c-gpio", |
||||
.id = 0, |
||||
.dev = { |
||||
.platform_data = &gl_ar750_i2c_gpio_data, |
||||
}, |
||||
}; |
||||
|
||||
static void __init gl_ar750_setup(void) |
||||
{ |
||||
u8 *art = (u8 *) KSEG1ADDR(0x1f050000); |
||||
|
||||
ath79_register_m25p80(NULL); |
||||
|
||||
ath79_setup_ar933x_phy4_switch(false, false); |
||||
ath79_register_mdio(0, 0x0); |
||||
|
||||
ath79_switch_data.phy4_mii_en = 1; |
||||
ath79_switch_data.phy_poll_mask = 0xfc; |
||||
|
||||
/* WAN */ |
||||
ath79_eth0_data.duplex = DUPLEX_FULL; |
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; |
||||
ath79_eth0_data.phy_mask = BIT(4); |
||||
ath79_eth0_data.speed = SPEED_100; |
||||
ath79_init_mac(ath79_eth0_data.mac_addr, art + GL_AR750_MAC0_OFFSET, 0); |
||||
ath79_register_eth(0); |
||||
|
||||
/* LAN */ |
||||
ath79_eth1_data.duplex = DUPLEX_FULL; |
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; |
||||
ath79_init_mac(ath79_eth1_data.mac_addr, art + GL_AR750_MAC0_OFFSET, 1); |
||||
ath79_register_eth(1); |
||||
|
||||
/* Disable JTAG (enables GPIO0-3) */ |
||||
ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); |
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar750_leds_gpio), |
||||
gl_ar750_leds_gpio); |
||||
|
||||
ath79_register_gpio_keys_polled(-1, GL_AR750_KEYS_POLL_INTERVAL, |
||||
ARRAY_SIZE(gl_ar750_gpio_keys), |
||||
gl_ar750_gpio_keys); |
||||
|
||||
gpio_request_one(GL_AR750_GPIO_USB_POWER, |
||||
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, |
||||
"USB power"); |
||||
|
||||
platform_device_register(&gl_ar750_i2c_gpio); |
||||
|
||||
ath79_register_usb(); |
||||
|
||||
ath79_register_wmac(art + GL_AR750_WMAC2G_CALDATA_OFFSET, NULL); |
||||
|
||||
ap91_pci_init(art + GL_AR750_WMAC5G_CALDATA_OFFSET, NULL); |
||||
} |
||||
|
||||
MIPS_MACHINE(ATH79_MACH_GL_AR750, "GL-AR750", "GL.iNet GL-AR750", |
||||
gl_ar750_setup); |
Loading…
Reference in new issue